Assessor Resource

AHCINF202
Install, maintain and repair farm fencing

Assessment tool

Version 1.0
Issue Date: April 2024


This unit of competency describes the skills and knowledge required to install, maintain and repair farm fencing.

All work is carried out to comply with workplace procedures, work health and safety legislation and codes, manufacturer’s specifications and sustainability practices

This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.

No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for fencing work

1.1 Confirm work instructions with supervisor

1.2 Identify hazards and report to supervisor

1.3 Select tools and equipment appropriate to meet job requirements

1.3 Carry out routine pre-operational checks of tools

1.4 Identify faulty or unsafe tools and segregate for repair or replacement

1.5 Select and fit appropriate personal protective equipment

1.6 Arrange transport of fencing materials, tools and equipment to worksite

2. Undertake fence installation

2.1 Install and secure posts and stays

2.2 String and tension wire

2.3 Attach wire netting or other fencing materials

2.4 Position and attach gates and check for their correct operation

3. Maintain and repair fencing

3.1 Identify faults or structural damage and carry out necessary repairs

3.2 Dismantle fences and recover re-useable materials

3.3 Identify and report further maintenance or repair works

3.4 Pack for reuse, or dispose of, used fencing material

4. Complete fencing work

4.1 Clear and tidy work area and dispose of all non re-useable materials in an environmentally responsible manner

4.2 Clean and store tools, personal protective equipment and re-useable materials

4.3 Complete workplace records

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards and following safe work practices

select the appropriate materials and tools

assess the fencing site for environmental impacts of the fence

install fence posts and stays erect fences, tension fencing wire and netting, install gates and components

undertake repairs

record work activities

clean up the fencing site and remove and dispose of, or recycle, waste

use hand tools and powered fencing machinery in a safe, efficient and controlled manner

The candidate must demonstrate knowledge of:

designs and purpose of a range of conventional fencing

wire types, knots, tensions applications and limitations

common hazards involved in fencing installation, maintenance and repair

uses and types of fencing tools and equipment

fencing materials manufacturers specifications and guidelines

relevant work health and safety and environmental legislation, codes of practice and enterprise procedures

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for fencing work

1.1 Confirm work instructions with supervisor

1.2 Identify hazards and report to supervisor

1.3 Select tools and equipment appropriate to meet job requirements

1.3 Carry out routine pre-operational checks of tools

1.4 Identify faulty or unsafe tools and segregate for repair or replacement

1.5 Select and fit appropriate personal protective equipment

1.6 Arrange transport of fencing materials, tools and equipment to worksite

2. Undertake fence installation

2.1 Install and secure posts and stays

2.2 String and tension wire

2.3 Attach wire netting or other fencing materials

2.4 Position and attach gates and check for their correct operation

3. Maintain and repair fencing

3.1 Identify faults or structural damage and carry out necessary repairs

3.2 Dismantle fences and recover re-useable materials

3.3 Identify and report further maintenance or repair works

3.4 Pack for reuse, or dispose of, used fencing material

4. Complete fencing work

4.1 Clear and tidy work area and dispose of all non re-useable materials in an environmentally responsible manner

4.2 Clean and store tools, personal protective equipment and re-useable materials

4.3 Complete workplace records

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards and following safe work practices

select the appropriate materials and tools

assess the fencing site for environmental impacts of the fence

install fence posts and stays erect fences, tension fencing wire and netting, install gates and components

undertake repairs

record work activities

clean up the fencing site and remove and dispose of, or recycle, waste

use hand tools and powered fencing machinery in a safe, efficient and controlled manner

The candidate must demonstrate knowledge of:

designs and purpose of a range of conventional fencing

wire types, knots, tensions applications and limitations

common hazards involved in fencing installation, maintenance and repair

uses and types of fencing tools and equipment

fencing materials manufacturers specifications and guidelines

relevant work health and safety and environmental legislation, codes of practice and enterprise procedures

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Confirm work instructions with supervisor 
Identify hazards and report to supervisor 
Select tools and equipment appropriate to meet job requirements 
Carry out routine pre-operational checks of tools 
Identify faulty or unsafe tools and segregate for repair or replacement 
Select and fit appropriate personal protective equipment 
Arrange transport of fencing materials, tools and equipment to worksite 
Install and secure posts and stays 
String and tension wire 
Attach wire netting or other fencing materials 
Position and attach gates and check for their correct operation 
Identify faults or structural damage and carry out necessary repairs 
Dismantle fences and recover re-useable materials 
Identify and report further maintenance or repair works 
Pack for reuse, or dispose of, used fencing material 
Clear and tidy work area and dispose of all non re-useable materials in an environmentally responsible manner 
Clean and store tools, personal protective equipment and re-useable materials 
Complete workplace records 

Forms

Assessment Cover Sheet

AHCINF202 - Install, maintain and repair farm fencing
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCINF202 - Install, maintain and repair farm fencing

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: