Assessor Resource

AHCINF204
Fabricate and repair metal or plastic structures

Assessment tool

Version 1.0
Issue Date: April 2024


This unit of competency describes the skills and knowledge required to undertake minor fabrication and repair of metal or plastic structures where the services of a specialist trades person is not necessary.

All work is carried out to comply with workplace procedures, work health and safety legislation and codes, industry practice, manufacturer’s specifications and sustainability practices.

This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.

No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for fabrication or repair

1.1 Confirm work instructions with supervisor

1.2 Identify hazards and report to supervisor

1.3 Select and fit appropriate personal protective equipment

1.4 Confirm items for repair or fabrication

1.5 Select tools and equipment appropriate to job requirements

1.6 Select jointing or welding materials suitable to the job requirements

2. Assist with maintaining structures and facilities

2.1 Repair or fabricate equipment and structures

2.2 Use appropriate jointing methods

3. Complete fabrication and repair

3.1 Clean and store materials and equipment

3.2 Clean and maintain work area and remove hazardous materials in an environmentally responsible manner

3.3 Complete workplace records

The candidate must be observed undertaking minor fabrication and repair of metal or plastic structures where the services of a specialist trades person is not necessary.

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify job requirements and select materials, tools and equipment

identify hazards apply safe work practices including use of personal protective equipment

identify and use jointing methods and safe repair and fabrication techniques

use welding and thermal cutting equipment safely

clean up after operations

The candidate must demonstrate knowledge of:

types of fabrication materials and their various applications

range of metals and non-metal materials that may be used in fabrication and repair

industry joining and welding techniques and fabrication and repair methods

work health and safety requirements

environmental codes of practice with regard to equipment operation and maintenance activities

operating principles and operating methods for equipment

various types of welders and respective functions

environmental impacts and minimisation measures

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for fabrication or repair

1.1 Confirm work instructions with supervisor

1.2 Identify hazards and report to supervisor

1.3 Select and fit appropriate personal protective equipment

1.4 Confirm items for repair or fabrication

1.5 Select tools and equipment appropriate to job requirements

1.6 Select jointing or welding materials suitable to the job requirements

2. Assist with maintaining structures and facilities

2.1 Repair or fabricate equipment and structures

2.2 Use appropriate jointing methods

3. Complete fabrication and repair

3.1 Clean and store materials and equipment

3.2 Clean and maintain work area and remove hazardous materials in an environmentally responsible manner

3.3 Complete workplace records

The candidate must be observed undertaking minor fabrication and repair of metal or plastic structures where the services of a specialist trades person is not necessary.

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify job requirements and select materials, tools and equipment

identify hazards apply safe work practices including use of personal protective equipment

identify and use jointing methods and safe repair and fabrication techniques

use welding and thermal cutting equipment safely

clean up after operations

The candidate must demonstrate knowledge of:

types of fabrication materials and their various applications

range of metals and non-metal materials that may be used in fabrication and repair

industry joining and welding techniques and fabrication and repair methods

work health and safety requirements

environmental codes of practice with regard to equipment operation and maintenance activities

operating principles and operating methods for equipment

various types of welders and respective functions

environmental impacts and minimisation measures

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Confirm work instructions with supervisor 
Identify hazards and report to supervisor 
Select and fit appropriate personal protective equipment 
Confirm items for repair or fabrication 
Select tools and equipment appropriate to job requirements 
Select jointing or welding materials suitable to the job requirements 
Repair or fabricate equipment and structures 
Use appropriate jointing methods 
Clean and store materials and equipment 
Clean and maintain work area and remove hazardous materials in an environmentally responsible manner 
Complete workplace records 

Forms

Assessment Cover Sheet

AHCINF204 - Fabricate and repair metal or plastic structures
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCINF204 - Fabricate and repair metal or plastic structures

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: