Assessor Resource

AHCLSK321
Service and repair bores and windmills

Assessment tool

Version 1.0
Issue Date: April 2024


This unit of competency describes the skills and knowledge required to service and repair bores and windmills. This includes activities such as replacing parts, checking equipment for wear and tear, determining lime deposits, stripping, dismantling or reassembling bores and windmills.

These activities carry risk of falls due to working at heights, injury due to working with moving parts and machinery.

All work must be carried out to comply with workplace procedures, work health and safety legislation and codes of practice and manufacturer’s specifications

This unit applies to individuals who work under broad direction and take responsibility for own work including limited responsibility for the work of others. They use discretion and judgement in the selection and use of available resources and complete routine activities.

No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Establish bore history and enterprise policy

1.1 Review enterprise records and confirm bore history

1.2 Confirm enterprise bore and windmill service and repair policy with supervisor

1.3 Obtain any required specialist instructions and assistance as appropriate

2. Prepare to carry out service and repairs

2.1 Select and inspect tools, equipment and materials appropriate to job requirements

2.2 Carry out dismantling and stripping of windmill and bore installations appropriately

2.3 Identify hazards in the workplace, assess and control risks appropriately

3. Carry out service and repairs

3.1 Select, use and maintain personal protective equipment appropriately

3.2 Carry out service and repairs to bores, windmills, motors and pumps appropriately

3.3 Report complex faults and repairs and refer for specialist advice and remedial action appropriately

3.4 Retrieve lost equipment appropriately

4. Complete service and repair activities

4.1 Reassemble and test bore and windmill components appropriately for full function and flow

4.2 Clean work site, tools and equipment, return to operating order and store appropriately

4.3 Collect, treat, dispose of or recycle waste from service and repair activities appropriately

4.4 Document information appropriately

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards, assess risks and implement safe work procedures

apply basic diagnostic techniques

recognise faults and deterioration of components and carry out repairs to bore, mill heads and pumps to ensure the full function and flow of water supplies

select and match tools and equipment with work requirements

apply safe workplace and positive environmental procedures

read and interpret enterprise policy, maintenance plans, manufacturer specifications and Safety Data Sheets (SDSs)

effectively communicate with contractors and supervisor, record and report maintenance details and outcomes

calculate volumes, and measure speed, flow rates and distance

maintain all components of bores and windmills

carry out testing procedures to determine correct operation

refer to bore histories for troubleshooting

apply relevant work health and safety requirements

The candidate must demonstrate knowledge of:

construction of bores and windmills and maintenance requirements

diesel engine components, maintenance requirements and repair procedures

working principles of diesel engines

drive systems and components

types and uses of lubricants and other servicing materials

servicing characteristics of bores and windmills

types, characteristics, uses and limitations of hand and power tools

basic diagnostic processes and techniques

environmental codes of practice with regard to maintenance activities

work health and safety legislative requirements

Competency is to be assessed in the work place or workplace and simulated environments that accurately reflect performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Establish bore history and enterprise policy

1.1 Review enterprise records and confirm bore history

1.2 Confirm enterprise bore and windmill service and repair policy with supervisor

1.3 Obtain any required specialist instructions and assistance as appropriate

2. Prepare to carry out service and repairs

2.1 Select and inspect tools, equipment and materials appropriate to job requirements

2.2 Carry out dismantling and stripping of windmill and bore installations appropriately

2.3 Identify hazards in the workplace, assess and control risks appropriately

3. Carry out service and repairs

3.1 Select, use and maintain personal protective equipment appropriately

3.2 Carry out service and repairs to bores, windmills, motors and pumps appropriately

3.3 Report complex faults and repairs and refer for specialist advice and remedial action appropriately

3.4 Retrieve lost equipment appropriately

4. Complete service and repair activities

4.1 Reassemble and test bore and windmill components appropriately for full function and flow

4.2 Clean work site, tools and equipment, return to operating order and store appropriately

4.3 Collect, treat, dispose of or recycle waste from service and repair activities appropriately

4.4 Document information appropriately

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify hazards, assess risks and implement safe work procedures

apply basic diagnostic techniques

recognise faults and deterioration of components and carry out repairs to bore, mill heads and pumps to ensure the full function and flow of water supplies

select and match tools and equipment with work requirements

apply safe workplace and positive environmental procedures

read and interpret enterprise policy, maintenance plans, manufacturer specifications and Safety Data Sheets (SDSs)

effectively communicate with contractors and supervisor, record and report maintenance details and outcomes

calculate volumes, and measure speed, flow rates and distance

maintain all components of bores and windmills

carry out testing procedures to determine correct operation

refer to bore histories for troubleshooting

apply relevant work health and safety requirements

The candidate must demonstrate knowledge of:

construction of bores and windmills and maintenance requirements

diesel engine components, maintenance requirements and repair procedures

working principles of diesel engines

drive systems and components

types and uses of lubricants and other servicing materials

servicing characteristics of bores and windmills

types, characteristics, uses and limitations of hand and power tools

basic diagnostic processes and techniques

environmental codes of practice with regard to maintenance activities

work health and safety legislative requirements

Competency is to be assessed in the work place or workplace and simulated environments that accurately reflect performance in a real workplace setting.

Assessors must satisfy current standards for RTOs.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review enterprise records and confirm bore history 
Confirm enterprise bore and windmill service and repair policy with supervisor 
Obtain any required specialist instructions and assistance as appropriate 
Select and inspect tools, equipment and materials appropriate to job requirements 
Carry out dismantling and stripping of windmill and bore installations appropriately 
Identify hazards in the workplace, assess and control risks appropriately 
Select, use and maintain personal protective equipment appropriately 
Carry out service and repairs to bores, windmills, motors and pumps appropriately 
Report complex faults and repairs and refer for specialist advice and remedial action appropriately 
Retrieve lost equipment appropriately 
Reassemble and test bore and windmill components appropriately for full function and flow 
Clean work site, tools and equipment, return to operating order and store appropriately 
Collect, treat, dispose of or recycle waste from service and repair activities appropriately 
Document information appropriately 

Forms

Assessment Cover Sheet

AHCLSK321 - Service and repair bores and windmills
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCLSK321 - Service and repair bores and windmills

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: