Assessor Resource

AHCMOM207
Conduct front-end loader operations

Assessment tool

Version 1.0
Issue Date: May 2024


This unit of competency describes the skills and knowledge required to operate a front end loader in an agricultural environment.

All work is carried out to comply with workplace procedures and any local, state and federal government regulations, legislation and codes of practice.

This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context. Appropriate licences for the operation front-end loaders must be obtained where required.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for operations

1.1 Read or listen to supervisor’s instructions and seek clarification where necessary

1.2 Read the front end loader operation manual and observe manufacturer’s instructions

1.3 Identify and report potential site, work health and safety hazards

1.4 Assess the work site and confirm the suitability of the machinery for the task

1.5 Conduct routine pre operational checks

1.6 Observe safety rules and regulations, including site rules and legislation and site specific instructions

2. Operate front-end loader

2.1 Undertake start-up, park-up, shut-down and communications procedures in accordance with manufacturers’ and site specific requirements

2.2 Conduct Front-end loader operations within equipment and operational limitations

2.3 Use safe work practices

2.4 Select loading technique and modify where required to meet changing work conditions

2.5 Use attachments in accordance with manufacturer’s instructions and site requirements

2.6 Use safe towing practices in accordance with the authorised equipment and connection capabilities

2.7 Undertake work in accordance with the agreed plan and within the operating capacities and manufacturer's specifications

2.8 Carry out all work with consideration of environmental impact

3. Carry out basic operator maintenance

3.1 Follow shut down procedures in line with manufacturers' specifications and site requirements

3.2 Perform routine operational servicing and minor maintenance

3.3 Identify and report malfunctions, faults, irregular performance or damage

3.4 Clean, secure and store machinery

3.5 Apply enterprise biosecurity policies where required

3.6 Maintain machinery use records

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify and report potential work health and safety hazards on the site

read the front end loader operation manual and observe manufacturer’s instructions

conduct pre-operational checks

operate front-end loaders safely

operating the front-end loader features and attachments consistent with manufacturer’s operator manual

use safe towing practices

carry out day to day servicing and fault finding and minor maintenance

communicate with supervisor and work team

apply enterprise environmental policies

apply enterprise biosecurity policies where required

The candidate must demonstrate knowledge of:

front-end loader operations as stated in the relevant manufacturers operation manual

front-end loader and site safety requirements

hazards and risks associated with front-end loader operations

characteristics, technical capabilities and limitations of front-end loaders

operational and maintenance procedures

enterprise biosecurity and environmental policies and protocols

relevant State/Territory legislation related to the operation of front-end loaders

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessment must be conducted in a range of surface conditions and on a range of different terrains.

Assessors must satisfy current standards for RTOs

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for operations

1.1 Read or listen to supervisor’s instructions and seek clarification where necessary

1.2 Read the front end loader operation manual and observe manufacturer’s instructions

1.3 Identify and report potential site, work health and safety hazards

1.4 Assess the work site and confirm the suitability of the machinery for the task

1.5 Conduct routine pre operational checks

1.6 Observe safety rules and regulations, including site rules and legislation and site specific instructions

2. Operate front-end loader

2.1 Undertake start-up, park-up, shut-down and communications procedures in accordance with manufacturers’ and site specific requirements

2.2 Conduct Front-end loader operations within equipment and operational limitations

2.3 Use safe work practices

2.4 Select loading technique and modify where required to meet changing work conditions

2.5 Use attachments in accordance with manufacturer’s instructions and site requirements

2.6 Use safe towing practices in accordance with the authorised equipment and connection capabilities

2.7 Undertake work in accordance with the agreed plan and within the operating capacities and manufacturer's specifications

2.8 Carry out all work with consideration of environmental impact

3. Carry out basic operator maintenance

3.1 Follow shut down procedures in line with manufacturers' specifications and site requirements

3.2 Perform routine operational servicing and minor maintenance

3.3 Identify and report malfunctions, faults, irregular performance or damage

3.4 Clean, secure and store machinery

3.5 Apply enterprise biosecurity policies where required

3.6 Maintain machinery use records

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

identify and report potential work health and safety hazards on the site

read the front end loader operation manual and observe manufacturer’s instructions

conduct pre-operational checks

operate front-end loaders safely

operating the front-end loader features and attachments consistent with manufacturer’s operator manual

use safe towing practices

carry out day to day servicing and fault finding and minor maintenance

communicate with supervisor and work team

apply enterprise environmental policies

apply enterprise biosecurity policies where required

The candidate must demonstrate knowledge of:

front-end loader operations as stated in the relevant manufacturers operation manual

front-end loader and site safety requirements

hazards and risks associated with front-end loader operations

characteristics, technical capabilities and limitations of front-end loaders

operational and maintenance procedures

enterprise biosecurity and environmental policies and protocols

relevant State/Territory legislation related to the operation of front-end loaders

Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting.

Assessment must be conducted in a range of surface conditions and on a range of different terrains.

Assessors must satisfy current standards for RTOs
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Read or listen to supervisor’s instructions and seek clarification where necessary 
Read the front end loader operation manual and observe manufacturer’s instructions 
Identify and report potential site, work health and safety hazards 
Assess the work site and confirm the suitability of the machinery for the task 
Conduct routine pre operational checks 
Observe safety rules and regulations, including site rules and legislation and site specific instructions 
Undertake start-up, park-up, shut-down and communications procedures in accordance with manufacturers’ and site specific requirements 
Conduct Front-end loader operations within equipment and operational limitations 
Use safe work practices 
Select loading technique and modify where required to meet changing work conditions 
Use attachments in accordance with manufacturer’s instructions and site requirements 
Use safe towing practices in accordance with the authorised equipment and connection capabilities 
Undertake work in accordance with the agreed plan and within the operating capacities and manufacturer's specifications 
Carry out all work with consideration of environmental impact 
Follow shut down procedures in line with manufacturers' specifications and site requirements 
Perform routine operational servicing and minor maintenance 
Identify and report malfunctions, faults, irregular performance or damage 
Clean, secure and store machinery 
Apply enterprise biosecurity policies where required 
Maintain machinery use records 

Forms

Assessment Cover Sheet

AHCMOM207 - Conduct front-end loader operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCMOM207 - Conduct front-end loader operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: