Assessor Resource

AHCSPO305A
Operate seed treatment machinery

Assessment tool

Version 1.0
Issue Date: May 2024


This unit relates to operating seed modification or seed treatment machinery and equipment such as coating and pelleting machinery and chemical treatment machinery.

This unit covers the process of applying a range of treatments or modifications to seed and defines the standard required to: set up and prepare seed treatment machinery for use; operate seed treatment machinery; complete and report on seed treatment machinery and equipment operation.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

In order to confer competency, evidence must prove that the candidate is able to:

set up and prepare seed treatment machinery for use

operate seed treatment machinery, and

complete and report on seed treatment machinery and equipment operation.

Context of and specific resources for assessment

Competency requires the application of work practices under work conditions. Selection and use of resources for some worksites may differ due to the regional or enterprise circumstances.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

operate seed treatment machinery and equipment

formulate a chemical mix to achieve the best practice

calculate, calibrate and measure dose rates

apply powders and thickeners

identify and understand seed dryers and their expectations and limitations

identify different types of seed coating machines

use literacy skills to read, interpret and follow organisational policies and procedures, follow sequenced written instructions, record accurately and legible information collected and select and apply procedures for a range of tasks

use oral communication skills/language competence to fulfil the job role as specified by the organisation, including questioning techniques, active listening, clarifying information and consulting with supervisors as required

use interpersonal skills to work with and relate to people from a range of cultural, social and religious backgrounds and with a range of physical and mental abilities.

Required knowledge

difference between coating and pelleting [<5% weight gain film coating (insecticide/fungicide) or >5% weight gain is pelleting]

chemical types and classes

hazards of chemicals

Personal Protective Equipment (PPE)

the expectations and limitations of different types of seed coating machines

the labelling requirements associated with coated seed.

the use and differences in biological components in seed coatings

the interaction of biological components and their effect on other chemicals, powders, polymers and heat

confined space working hazards

rules and regulations for storage, transportation and bunding

types of seed treatment machinery and equipment

basics of programmable logic controller / treatment control systems and electrical process.

methods of applying chemical and basic recipe formula

methods of applying powders and thickeners

disposal of waste chemical

procedures for drying, scalping and aspiration of treated seed.

The range statement relates to the unit of competency as a whole.

Seed treatments may include:

all forms of commercial seed treatment from very basic spray pack application of insecticide for stored grain pests through to all configurations of continuous, batch and rotary machines

for example:

hand held spray packs

slurry treaters

spray pumps

direct seed coaters

mist-a-matic

batch treaters

Panagen

rotary coaters

coating pans

driers

cement mixers.

Machinery and equipment may include:

all machinery and equipment used to apply treatments to seed including but not exclusive to:

fungicides

insecticides

biologicals

colours and polymers

powders and coating mediums

any variation of these machines, with or without additions to enhance performance.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Seed treatment machinery and equipment is selected and prepared to job requirements and confirmed against work plan. 
Routine pre-operational checks of seed treatment machinery and equipment are completed to manufacturers' specifications and enterprise requirements. 
Occupational Health and Safety (OHS) hazards in the workplace are recognised, risk assessed and minimised according to enterprise requirements. 
Seed treatment machinery and equipment is operated in a safe and controlled manner and monitored for performance and efficiency. 
Risks to self, others and the environment are anticipated and minimisation strategies implemented accordingly. 
Suitable personal protective clothing and equipment is selected, used, maintained and stored according to OHS requirements. 
Environmental implications associated with seed treatment machinery operation are identified, assessed and reported to the supervisor. 
Shut-down procedures for seed treatment machinery and equipment are completed to manufacturers' specifications and enterprise requirements. 
Seed treatment machinery and equipment operational records are completed and maintained according to enterprise requirements. 
Malfunctions, faults, observations of irregular performance and damage to seed treatment machinery and equipment are detailed and reported according to enterprise requirements. 
Seed treatment machinery and equipment is cleaned, secured and stored according to OHS and enterprise requirements. 

Forms

Assessment Cover Sheet

AHCSPO305A - Operate seed treatment machinery
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCSPO305A - Operate seed treatment machinery

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: