Assessor Resource

AMPA2076
Operate automatic CL determination machine

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the skills and knowledge required to set up and monitor the operation of an automatic chemical lean (CL) percentage determination machine for carton meat.

This unit is applicable to boning room operations.

All work should be carried out to comply with workplace and hygiene requirements.

This unit applies to individuals who work under general supervision, exercise limited autonomy and have some accountability for their own work.

No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

This unit must be delivered and assessed in the context of Australian meat processing standards and regulations.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Operate and monitor CL determination machine

1.1 Operate and monitor CL determination machine in accordance with workplace requirements

1.2 Monitor and report out-of-specification performance of machine in accordance with workplace requirements

2. Maintain CL determination machine

2.1 Perform routine maintenance of CL determination machine in accordance with manufacturer specifications and workplace requirements

2.2 Report major maintenance problems promptly in accordance with workplace requirements

The candidate must set up and monitor the operation of an automatic chemical lean (CL) percentage determination machine for carton meat.

The candidate must:

follow start-up and shut-down procedures as specified in manufacturer specifications and workplace requirements

isolate out-of-specification cartons in accordance with work instructions

apply relevant workplace health and safety requirements

apply relevant regulatory requirements

use relevant communication skills relevant to work instructions

perform routine maintenance of CL determination machine in accordance with manufacturer specifications and workplace requirements

report major maintenance problems promptly in accordance with workplace requirements

The candidate must demonstrate a basic factual, technical and procedural knowledge of:

start-up and monitoring procedures for CL determination machines

general principles of CL determination

action required if out-of-specification cartons are detected

relevant workplace health and safety requirements

relevant regulatory requirements

Assessment must occur in the workplace under normal production conditions.

Competency must be demonstrated at normal chain speed.

As a minimum, the following three forms of assessment must be used:

quiz of underpinning knowledge

workplace demonstration

workplace referee or third-party report of performance over time

Assessors must satisfy the current standards for RTOs.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Operate and monitor CL determination machine

1.1 Operate and monitor CL determination machine in accordance with workplace requirements

1.2 Monitor and report out-of-specification performance of machine in accordance with workplace requirements

2. Maintain CL determination machine

2.1 Perform routine maintenance of CL determination machine in accordance with manufacturer specifications and workplace requirements

2.2 Report major maintenance problems promptly in accordance with workplace requirements

The candidate must set up and monitor the operation of an automatic chemical lean (CL) percentage determination machine for carton meat.

The candidate must:

follow start-up and shut-down procedures as specified in manufacturer specifications and workplace requirements

isolate out-of-specification cartons in accordance with work instructions

apply relevant workplace health and safety requirements

apply relevant regulatory requirements

use relevant communication skills relevant to work instructions

perform routine maintenance of CL determination machine in accordance with manufacturer specifications and workplace requirements

report major maintenance problems promptly in accordance with workplace requirements

The candidate must demonstrate a basic factual, technical and procedural knowledge of:

start-up and monitoring procedures for CL determination machines

general principles of CL determination

action required if out-of-specification cartons are detected

relevant workplace health and safety requirements

relevant regulatory requirements

Assessment must occur in the workplace under normal production conditions.

Competency must be demonstrated at normal chain speed.

As a minimum, the following three forms of assessment must be used:

quiz of underpinning knowledge

workplace demonstration

workplace referee or third-party report of performance over time

Assessors must satisfy the current standards for RTOs.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Operate and monitor CL determination machine in accordance with workplace requirements 
Monitor and report out-of-specification performance of machine in accordance with workplace requirements 
Perform routine maintenance of CL determination machine in accordance with manufacturer specifications and workplace requirements 
Report major maintenance problems promptly in accordance with workplace requirements 

Forms

Assessment Cover Sheet

AMPA2076 - Operate automatic CL determination machine
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AMPA2076 - Operate automatic CL determination machine

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: