List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Identify specifications for cuts | 1.1 Determine specifications are determined using cut descriptions according to regulatory requirements, customer specifications and workplace requirements |
2. Slice and trim primary meat cuts | 2.1 Slice primary meat cuts into finished meat cuts according to specifications and work instructions 2.2 Slice primary meat cuts into finished meat cuts following workplace health and safety requirements including safe manual handling techniques and the safe and effective use of knives 2.3 Follow dropped meat procedures in accordance with workplace requirements 2.4 Take corrective action to ensure out-of-specification product is not forwarded for packing |
3. Identify and remove defects | 3.1 Identify, remove and report defects reported according to government regulations and workplace standards 3.2 Report persistent defects to supervisor in accordance with work instructions |
The candidate must slice and trim relevant cuts of meat from the middle (trunk) of a small stock carcase.
The candidate must:
check and adjust the accuracy of small stock cutting lines
identify primal cuts
slice primary meat cuts into finished meat cuts following the work instruction and at production speed
identify out-of-specification product
apply relevant regulatory requirements
report defects accurately, promptly and in accordance with work instructions
apply relevant communication skills relevant to work instructions and Standard Operating Procedures (SOPs) when reporting to supervisors and interacting with team members.
The candidate must demonstrate a factual, technical, procedural and theoretical knowledge of:
primal or sub primal cutting lines as they relate to workplace specifications and regulatory requirements
basic anatomy relevant to cutting lines
how yield is calculated and why it is important
causes of defects and out-of-specification product
workplace health and safety requirements
relevant regulatory requirements.
Assessment must be conducted in a registered, operating meat processing plant or premises.
Competency must be demonstrated at the normal rate of production for that plant.
As a minimum, the following three forms of assessment must be used:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessors must satisfy the current standards for RTOs.