Assessor Resource

AUMASA001
Apply safe work practices in the automotive manufacturing environment

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to apply safe work practices in an automotive manufacturing environment.

It involves the application of skills and knowledge at a production worker level.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Identify work health and safety requirements

1.1 Work health and safety (WHS) requirements applicable to job context are identified

1.2 Roles and responsibilities of key personnel connected with WHS are identified

1.3 Personal protective equipment (PPE) applicable to job context is identified

2. Follow work health and safety procedures

2.1 Housekeeping is carried out according to workplace procedures and WHS requirements

2.2 Manual-handling techniques and safety equipment are used according to workplace and manufacturer procedures and WHS requirements

2.3 Personal protective equipment (PPE) is used according to workplace and manufacturer procedures and WHS requirements

2.4 PPE is maintained and stored according to workplace and manufacturer procedures

3. Respond to hazards in the workplace

3.1 Workplace hazards and risks are identified and reported according to workplace procedures

3.2 Non-conformance in the use, storage and labelling of hazardous materials is identified and reported to appropriate personnel

4. Follow emergency procedures

4.1 Emergency procedures are identified, followed and reported to appropriate personnel according to workplace procedures and WHS requirements

4.2 Emergency equipment is accessed and used according to workplace procedures and WHS requirements

4.3 Faulty emergency equipment is identified, tagged and reported

5. Complete incident and accident reports

5.1 Workplace incident and accident reporting procedures are identified

5.2 Incident and accident reports are completed according to workplace procedures and submitted to appropriate personnel

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Identify work health and safety requirements

1.1 Work health and safety (WHS) requirements applicable to job context are identified

1.2 Roles and responsibilities of key personnel connected with WHS are identified

1.3 Personal protective equipment (PPE) applicable to job context is identified

2. Follow work health and safety procedures

2.1 Housekeeping is carried out according to workplace procedures and WHS requirements

2.2 Manual-handling techniques and safety equipment are used according to workplace and manufacturer procedures and WHS requirements

2.3 Personal protective equipment (PPE) is used according to workplace and manufacturer procedures and WHS requirements

2.4 PPE is maintained and stored according to workplace and manufacturer procedures

3. Respond to hazards in the workplace

3.1 Workplace hazards and risks are identified and reported according to workplace procedures

3.2 Non-conformance in the use, storage and labelling of hazardous materials is identified and reported to appropriate personnel

4. Follow emergency procedures

4.1 Emergency procedures are identified, followed and reported to appropriate personnel according to workplace procedures and WHS requirements

4.2 Emergency equipment is accessed and used according to workplace procedures and WHS requirements

4.3 Faulty emergency equipment is identified, tagged and reported

5. Complete incident and accident reports

5.1 Workplace incident and accident reporting procedures are identified

5.2 Incident and accident reports are completed according to workplace procedures and submitted to appropriate personnel

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Work health and safety (WHS) requirements must include:

first aid equipment

procedures for handling hazardous material

hazard control procedures, including those for hazardous materials and toxic substances

manual-handling techniques

personal protective clothing and equipment

safe use of tools, equipment and machinery.

Personal protective equipment must include:

ear plugs

glasses

gloves

helmets

protective clothing

safety boots.

Housekeeping must include:

cleaning and maintaining workplace and work areas

removing spillages

storing materials.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS) requirements applicable to job context are identified 
Roles and responsibilities of key personnel connected with WHS are identified 
Personal protective equipment (PPE) applicable to job context is identified 
Housekeeping is carried out according to workplace procedures and WHS requirements 
Manual-handling techniques and safety equipment are used according to workplace and manufacturer procedures and WHS requirements 
Personal protective equipment (PPE) is used according to workplace and manufacturer procedures and WHS requirements 
PPE is maintained and stored according to workplace and manufacturer procedures 
Workplace hazards and risks are identified and reported according to workplace procedures 
Non-conformance in the use, storage and labelling of hazardous materials is identified and reported to appropriate personnel 
Emergency procedures are identified, followed and reported to appropriate personnel according to workplace procedures and WHS requirements 
Emergency equipment is accessed and used according to workplace procedures and WHS requirements 
Faulty emergency equipment is identified, tagged and reported 
Workplace incident and accident reporting procedures are identified 
Incident and accident reports are completed according to workplace procedures and submitted to appropriate personnel 

Forms

Assessment Cover Sheet

AUMASA001 - Apply safe work practices in the automotive manufacturing environment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMASA001 - Apply safe work practices in the automotive manufacturing environment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: