Assessor Resource

AUMATA003
Rectify faults in vehicle metal components

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to assess and repair faults to vehicle metal components as a result of manufacturing and production line damage or defective metal.

It applies to individuals in an automotive and related component manufacturing environment and involves the application of skills and knowledge at a specialist level.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work order, job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are identified, selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

1.4 Repair plan is prepared and confirmed with appropriate personnel

2. Assess fault

2.1 Vehicle components are inspected for fault against job specifications and workplace quality standards

2.2 Fault or defects are assessed and cause identified

3. Repair fault

3.1 Repair activities are carried out according to workplace procedures

3.2 Appropriate tools are used to repair fault or defects

3.3 Faulty or defective areas are repaired to original equipment manufacturer (OEM) specifications and workplace quality standards

3.4 Repaired components are inspected for compliance against OEM specifications and returned to the production sequence

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of, reused or recycled according to workplace procedures and cost-reduction initiatives

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Faulty tools and equipment are identified, tagged and reported

4.4 Repair work sheet is completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work order, job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are identified, selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

1.4 Repair plan is prepared and confirmed with appropriate personnel

2. Assess fault

2.1 Vehicle components are inspected for fault against job specifications and workplace quality standards

2.2 Fault or defects are assessed and cause identified

3. Repair fault

3.1 Repair activities are carried out according to workplace procedures

3.2 Appropriate tools are used to repair fault or defects

3.3 Faulty or defective areas are repaired to original equipment manufacturer (OEM) specifications and workplace quality standards

3.4 Repaired components are inspected for compliance against OEM specifications and returned to the production sequence

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of, reused or recycled according to workplace procedures and cost-reduction initiatives

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Faulty tools and equipment are identified, tagged and reported

4.4 Repair work sheet is completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

quality requirements

recording and reporting

use of repair equipment

WHS requirements.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work order, job instructions and quality requirements are located and confirmed with appropriate personnel 
Tools and equipment required for the job are identified, selected and checked for faults and correct operation 
Materials required to complete the job are identified and prepared 
Repair plan is prepared and confirmed with appropriate personnel 
Vehicle components are inspected for fault against job specifications and workplace quality standards 
Fault or defects are assessed and cause identified 
Repair activities are carried out according to workplace procedures 
Appropriate tools are used to repair fault or defects 
Faulty or defective areas are repaired to original equipment manufacturer (OEM) specifications and workplace quality standards 
Repaired components are inspected for compliance against OEM specifications and returned to the production sequence 
Work area is cleaned, and materials disposed of, reused or recycled according to workplace procedures and cost-reduction initiatives 
Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures 
Faulty tools and equipment are identified, tagged and reported 
Repair work sheet is completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMATA003 - Rectify faults in vehicle metal components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMATA003 - Rectify faults in vehicle metal components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: