Assessor Resource

AUMATA005
Rectify assembly faults

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the performance outcomes required to rectify assembly faults based on recommendations from vehicle inspection and test reports.

It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare work

1.1 Work order and work instructions, inspection reports and specifications are obtained and confirmed

1.2 Tools, equipment and materials required for the job are selected and inspected for safe operation and quality

2. Locate and rectify faults

2.1 Workplace procedures are identified and followed

2.2 Faults are located and diagnosed, and correction method is planned

2.3 Replacement materials are identified, obtained and prepared according to inspection reports

2.4 Rectification activities are carried out according to vehicle specifications

2.5 Faults are re-diagnosed to ensure they have been rectified and final adjustments are made

3. Complete work processes

3.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

3.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

3.3 Faulty tools and equipment are identified, tagged and reported

3.4 Repair inspection reports and work sheets are completed according to workplace procedures


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare work

1.1 Work order and work instructions, inspection reports and specifications are obtained and confirmed

1.2 Tools, equipment and materials required for the job are selected and inspected for safe operation and quality

2. Locate and rectify faults

2.1 Workplace procedures are identified and followed

2.2 Faults are located and diagnosed, and correction method is planned

2.3 Replacement materials are identified, obtained and prepared according to inspection reports

2.4 Rectification activities are carried out according to vehicle specifications

2.5 Faults are re-diagnosed to ensure they have been rectified and final adjustments are made

3. Complete work processes

3.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

3.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

3.3 Faulty tools and equipment are identified, tagged and reported

3.4 Repair inspection reports and work sheets are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

continuous improvement processes

equipment maintenance and storage

quality guidelines

recording and reporting

use of equipment

WHS requirements.

Faults must include:

body panel and component fit

door gaps

surface damage

vehicle sealing

weld defects.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work order and work instructions, inspection reports and specifications are obtained and confirmed 
Tools, equipment and materials required for the job are selected and inspected for safe operation and quality 
Workplace procedures are identified and followed 
Faults are located and diagnosed, and correction method is planned 
Replacement materials are identified, obtained and prepared according to inspection reports 
Rectification activities are carried out according to vehicle specifications 
Faults are re-diagnosed to ensure they have been rectified and final adjustments are made 
Work area is cleaned, and materials disposed of or recycled according to workplace procedures 
Tools and equipment are cleaned, checked and stored according to workplace procedures 
Faulty tools and equipment are identified, tagged and reported 
Repair inspection reports and work sheets are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMATA005 - Rectify assembly faults
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMATA005 - Rectify assembly faults

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: