Assessor Resource

AUMFTM001
Undertake preliminary fault finding and machine reset

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to enable an operator to perform a simple fault-finding task in a production environment.

It applies to those in a manufacturing environment and involves the application of skills and knowledge at a specialist level.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for fault finding and machine reset

1.1 Work instructions are identified and confirmed

1.2 Fault-finding checklist is developed and implemented

1.3 Machines and equipment for preliminary fault finding and reset are identified

2. Undertake fault finding and machine reset

2.1 Machine faults and machine reset requirements are identified according to checklist

2.2 Identified faults are repaired, adjusted and recorded

2.3 Machines are reset as required according to workplace procedures

2.4 Machinery repair team and other relevant personnel are advised of outcomes

3. Complete work processes

3.1 Causes of faults are reported to appropriate personnel

3.2 Suggestions for improvement to machine operating procedures are reported

3.3 New process is validated and workplace is restored

3.4 Work sheets are completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for fault finding and machine reset

1.1 Work instructions are identified and confirmed

1.2 Fault-finding checklist is developed and implemented

1.3 Machines and equipment for preliminary fault finding and reset are identified

2. Undertake fault finding and machine reset

2.1 Machine faults and machine reset requirements are identified according to checklist

2.2 Identified faults are repaired, adjusted and recorded

2.3 Machines are reset as required according to workplace procedures

2.4 Machinery repair team and other relevant personnel are advised of outcomes

3. Complete work processes

3.1 Causes of faults are reported to appropriate personnel

3.2 Suggestions for improvement to machine operating procedures are reported

3.3 New process is validated and workplace is restored

3.4 Work sheets are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Work instructions must include:

manufacturer instructions for the use of equipment and materials

workplace procedures relating to the use and operation of tools and equipment

workplace instructions, including:

drawings and designs

fault-finding plans

job sheets

machine reset specifications

workplace procedures relating to reporting and communications.

Preliminary fault findingand reset must include:

communication with production line supervisor and emergency repair team

following workplace checklists and routines to establish:

component defects

machine malfunction faults

machine reset requirements.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions are identified and confirmed 
Fault-finding checklist is developed and implemented 
Machines and equipment for preliminary fault finding and reset are identified 
Machine faults and machine reset requirements are identified according to checklist 
Identified faults are repaired, adjusted and recorded 
Machines are reset as required according to workplace procedures 
Machinery repair team and other relevant personnel are advised of outcomes 
Causes of faults are reported to appropriate personnel 
Suggestions for improvement to machine operating procedures are reported 
New process is validated and workplace is restored 
Work sheets are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMFTM001 - Undertake preliminary fault finding and machine reset
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMFTM001 - Undertake preliminary fault finding and machine reset

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: