Assessor Resource

AUMFTM002
Create new product designs

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to create new designs for the plant, tools, equipment and systems required in the design, development and production of motor vehicles.

It applies to those in a manufacturing environment and involves the application of skills and knowledge at a specialist level.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Establish design requirements

1.1 Work instructions and plans are interpreted to identify processes and materials required

1.2 Information is gathered and analysed to determine key requirements of new design

1.3 Requirements of new design are documented according to workplace procedures

2. Identify constraints

2.1 Constraints on design concepts are identified and documented

2.2 Suitable strategies are developed to address identified constraints on designs

3. Create design concept

3.1 Initial design concept based on identified design requirements and constraints is created

3.2 Function, physical requirements and impact of the design concept are reviewed with appropriate personnel

3.3 Modifications to the initial design concept are made according to feedback provided by appropriate personnel

4. Produce design concept

4.1 Sketches are prepared to illustrate and explain proposed design concept

4.2 Concept sketches are reviewed with appropriate personnel and suitable changes are made

4.3 Critical dimensions and data of the design concept are identified

4.4 Drawings are prepared to enable manufacturing methods to be identified and evaluated

4.5 Draft product specifications are prepared according to workplace procedures

5. Determine suitable manufacturing methods, materials and processes

5.1 Suitable manufacturing methods are identified for the production of components and sub-assemblies

5.2 Identified manufacturing methods for components and sub-assemblies are evaluated with engineering personnel

5.3 Suitable assembly and finishing methods for the purpose of product design are identified and evaluated

6. Evaluate feasibility of design and manufacture

6.1 Proposed design and manufacturing processes are evaluated against the design requirements with appropriate personnel

6.2 Suitable design tests are conducted, and outcomes are documented

7. Modify design

7.1 Product designs are modified if necessary, based on test outcomes

7.2 Further tests are conducted to confirm modified design against design requirements

7.3 Outcomes of modifications and testing of new design concept are documented

8. Complete work processes

8.1 Documentation requirements for proposed new product design and associated manufacturing processes are identified

8.2 Design documents are processed for approval

8.3 Design documents are distributed and stored according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Establish design requirements

1.1 Work instructions and plans are interpreted to identify processes and materials required

1.2 Information is gathered and analysed to determine key requirements of new design

1.3 Requirements of new design are documented according to workplace procedures

2. Identify constraints

2.1 Constraints on design concepts are identified and documented

2.2 Suitable strategies are developed to address identified constraints on designs

3. Create design concept

3.1 Initial design concept based on identified design requirements and constraints is created

3.2 Function, physical requirements and impact of the design concept are reviewed with appropriate personnel

3.3 Modifications to the initial design concept are made according to feedback provided by appropriate personnel

4. Produce design concept

4.1 Sketches are prepared to illustrate and explain proposed design concept

4.2 Concept sketches are reviewed with appropriate personnel and suitable changes are made

4.3 Critical dimensions and data of the design concept are identified

4.4 Drawings are prepared to enable manufacturing methods to be identified and evaluated

4.5 Draft product specifications are prepared according to workplace procedures

5. Determine suitable manufacturing methods, materials and processes

5.1 Suitable manufacturing methods are identified for the production of components and sub-assemblies

5.2 Identified manufacturing methods for components and sub-assemblies are evaluated with engineering personnel

5.3 Suitable assembly and finishing methods for the purpose of product design are identified and evaluated

6. Evaluate feasibility of design and manufacture

6.1 Proposed design and manufacturing processes are evaluated against the design requirements with appropriate personnel

6.2 Suitable design tests are conducted, and outcomes are documented

7. Modify design

7.1 Product designs are modified if necessary, based on test outcomes

7.2 Further tests are conducted to confirm modified design against design requirements

7.3 Outcomes of modifications and testing of new design concept are documented

8. Complete work processes

8.1 Documentation requirements for proposed new product design and associated manufacturing processes are identified

8.2 Design documents are processed for approval

8.3 Design documents are distributed and stored according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Information must include:

Australian Design Rules (ADR)

fashion trends

safety needs

workplace production capability.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions and plans are interpreted to identify processes and materials required 
Information is gathered and analysed to determine key requirements of new design 
Requirements of new design are documented according to workplace procedures 
Constraints on design concepts are identified and documented 
Suitable strategies are developed to address identified constraints on designs 
Initial design concept based on identified design requirements and constraints is created 
Function, physical requirements and impact of the design concept are reviewed with appropriate personnel 
Modifications to the initial design concept are made according to feedback provided by appropriate personnel 
Sketches are prepared to illustrate and explain proposed design concept 
Concept sketches are reviewed with appropriate personnel and suitable changes are made 
Critical dimensions and data of the design concept are identified 
Drawings are prepared to enable manufacturing methods to be identified and evaluated 
Draft product specifications are prepared according to workplace procedures 
Suitable manufacturing methods are identified for the production of components and sub-assemblies 
Identified manufacturing methods for components and sub-assemblies are evaluated with engineering personnel 
Suitable assembly and finishing methods for the purpose of product design are identified and evaluated 
Proposed design and manufacturing processes are evaluated against the design requirements with appropriate personnel 
Suitable design tests are conducted, and outcomes are documented 
Product designs are modified if necessary, based on test outcomes 
Further tests are conducted to confirm modified design against design requirements 
Outcomes of modifications and testing of new design concept are documented 
Documentation requirements for proposed new product design and associated manufacturing processes are identified 
Design documents are processed for approval 
Design documents are distributed and stored according to workplace procedures 

Forms

Assessment Cover Sheet

AUMFTM002 - Create new product designs
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMFTM002 - Create new product designs

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: