Assessor Resource

AUMGLM001
Apply heavy vehicle standards

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to locate, interpret and apply Australian Design Rules (ADR), original equipment manufacturer (OEM) requirements, Heavy Vehicle National Law (HVNL) regulations, and Vehicle Standards Bulletin 6 (VSB6) National Code of Practice - Heavy Vehicle Modifications.

It applies to those working in the commercial vehicle industry, and involves the application of skills and knowledge at a specialist level.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Review standards

1.1 Heavy vehicle modification standards are identified

1.2 ADR, OEM requirements, HVNL regulations, and VSB6 specifications for heavy vehicles are interpreted and applied

2. Check that vehicle complies with standards

2.1 Workplace manufacturing or modification drawings are checked against VSB6 requirements for compliance

2.2 Standards are checked against OEM specifications

2.3 Work health and safety (WHS) requirements and workplace procedures are identified and followed

3. Complete documentation

3.1 Non-compliance of standards is reported to appropriate personnel for rectification according to workplace procedures

3.2 Workplace documentation is completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Review standards

1.1 Heavy vehicle modification standards are identified

1.2 ADR, OEM requirements, HVNL regulations, and VSB6 specifications for heavy vehicles are interpreted and applied

2. Check that vehicle complies with standards

2.1 Workplace manufacturing or modification drawings are checked against VSB6 requirements for compliance

2.2 Standards are checked against OEM specifications

2.3 Work health and safety (WHS) requirements and workplace procedures are identified and followed

3. Complete documentation

3.1 Non-compliance of standards is reported to appropriate personnel for rectification according to workplace procedures

3.2 Workplace documentation is completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Heavy vehicle modification standardsmust include:

ADR relevant to heavy vehicle modifications

HVNL regulations

OEM guides and manuals

VSB6 National Code of Practice - Heavy Vehicle Modifications.

Workplace procedures must include:

code of practice

VSB6

OEM specifications

WHS requirements

workplace quality.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Heavy vehicle modification standards are identified 
ADR, OEM requirements, HVNL regulations, and VSB6 specifications for heavy vehicles are interpreted and applied 
Workplace manufacturing or modification drawings are checked against VSB6 requirements for compliance 
Standards are checked against OEM specifications 
Work health and safety (WHS) requirements and workplace procedures are identified and followed 
Non-compliance of standards is reported to appropriate personnel for rectification according to workplace procedures 
Workplace documentation is completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGLM001 - Apply heavy vehicle standards
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGLM001 - Apply heavy vehicle standards

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: