Assessor Resource

AUMGTG001
Install fixed and moveable glass components on vehicles

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to cut, prepare and install fixed and moveable glass components on vehicles.

It applies to those in an automotive service and repair environment and involves the application of skills and knowledge at a production worker level.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Fabricate templates for glass components

1.1 Job specifications are identified from work orders and work instructions

1.2 Workplace procedures are identified

1.3 Templates are fabricated from selected materials to meet job specifications

2. Mark and cut glass openings

2.1 Templates are used to mark and cut glass opening using workplace methods and equipment

2.2 Vehicle panels and trims are prepared for installing glass components

3. Install glass components

3.1 Adhesives or glass retaining system are identified and selected according to work order and job specification

3.2 Glass components are installed according to vehicle manufacturer specifications

3.3 Installed glass components are checked against specifications and leak tested, and corrective action is taken as required

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Workplace documentation is completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Fabricate templates for glass components

1.1 Job specifications are identified from work orders and work instructions

1.2 Workplace procedures are identified

1.3 Templates are fabricated from selected materials to meet job specifications

2. Mark and cut glass openings

2.1 Templates are used to mark and cut glass opening using workplace methods and equipment

2.2 Vehicle panels and trims are prepared for installing glass components

3. Install glass components

3.1 Adhesives or glass retaining system are identified and selected according to work order and job specification

3.2 Glass components are installed according to vehicle manufacturer specifications

3.3 Installed glass components are checked against specifications and leak tested, and corrective action is taken as required

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

4.3 Workplace documentation is completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

recording and reporting guidelines for installing glass components in vehicles

use of equipment for installing glass components in vehicles

WHS requirements related to installing glass components in vehicles, including:

vehicle protection measures

personal protective equipment, including safety glasses, gloves and coveralls

workplace quality guidelines for installing glass components in vehicles.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job specifications are identified from work orders and work instructions 
Workplace procedures are identified 
Templates are fabricated from selected materials to meet job specifications 
Templates are used to mark and cut glass opening using workplace methods and equipment 
Vehicle panels and trims are prepared for installing glass components 
Adhesives or glass retaining system are identified and selected according to work order and job specification 
Glass components are installed according to vehicle manufacturer specifications 
Installed glass components are checked against specifications and leak tested, and corrective action is taken as required 
Work area is cleaned, and materials disposed of or recycled according to workplace procedures 
Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures 
Workplace documentation is completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGTG001 - Install fixed and moveable glass components on vehicles
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGTG001 - Install fixed and moveable glass components on vehicles

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: