Assessor Resource

AUMGTY003
Modify and repair chassis and frames

Assessment tool

Version 1.0
Issue Date: April 2024


This unit describes the performance outcomes required to modify, repair and align chassis and frame components.

It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Inspect vehicle

1.1 Inspection activities are carried out according to workplace procedures

1.2 Chassis or frame is measured and inspected to determine modification or repair requirements

1.3 Inspection report and work plan are prepared during inspection

2. Modify, repair and align chassis or components

2.1 Vehicle specifications are identified and interpreted according to original equipment manufacturer (OEM) specifications and regulatory requirements

2.2 Tools and equipment are selected and checked for correct operation, and identified faults reported

2.3 Chassis or frame is modified or repaired and then aligned according to job sheet and work order

3. Complete work processes

3.1 Completed work is checked against job sheet and OEM specifications

3.2 Work areas, tools and equipment are cleaned and stored according to workplace procedures

3.3 Work forms and final inspection reports are completed and submitted to appropriate personnel

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Inspect vehicle

1.1 Inspection activities are carried out according to workplace procedures

1.2 Chassis or frame is measured and inspected to determine modification or repair requirements

1.3 Inspection report and work plan are prepared during inspection

2. Modify, repair and align chassis or components

2.1 Vehicle specifications are identified and interpreted according to original equipment manufacturer (OEM) specifications and regulatory requirements

2.2 Tools and equipment are selected and checked for correct operation, and identified faults reported

2.3 Chassis or frame is modified or repaired and then aligned according to job sheet and work order

3. Complete work processes

3.1 Completed work is checked against job sheet and OEM specifications

3.2 Work areas, tools and equipment are cleaned and stored according to workplace procedures

3.3 Work forms and final inspection reports are completed and submitted to appropriate personnel

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

OEM specifications and regulatory requirements

recording and reporting requirements

tools and test equipment

work health and safety (WHS) requirements

workplace instructions.

Tools and equipment must include:

chassis alignment equipment

clamps, bracing and jigging systems

hand and power tools

measuring equipment

welding, cutting and heating equipment.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Inspection activities are carried out according to workplace procedures 
Chassis or frame is measured and inspected to determine modification or repair requirements 
Inspection report and work plan are prepared during inspection 
Vehicle specifications are identified and interpreted according to original equipment manufacturer (OEM) specifications and regulatory requirements 
Tools and equipment are selected and checked for correct operation, and identified faults reported 
Chassis or frame is modified or repaired and then aligned according to job sheet and work order 
Completed work is checked against job sheet and OEM specifications 
Work areas, tools and equipment are cleaned and stored according to workplace procedures 
Work forms and final inspection reports are completed and submitted to appropriate personnel 

Forms

Assessment Cover Sheet

AUMGTY003 - Modify and repair chassis and frames
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGTY003 - Modify and repair chassis and frames

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: