AURBTA004 - Assemble new boxed bicycles for retail sale
Assessor Resource
AURBTA004 Assemble new boxed bicycles for retail sale
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to assemble new bicycles for retail sale. It involves preparing for the work, selecting and using specialist tools and equipment, identifying bicycle components, interpreting manufacturer assembly instructions, assembling the bicycle, checking and testing assembled bicycle for safe operation, and completing workplace processes and documentation.
It applies to those working in the bicycle retail, service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to assemble new bicycle
1.1 Job requirements are determined from workplace instructions
1.2 Bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles are accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Assembly tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Assemble bicycle
2.1 Bicycle is unpacked and checked to ensure all components are included and not damaged
2.2 Missing or damaged components are reported according to workplace procedures
2.3 Bicycle and components are assembled and lubricated, and fastener tensions adjusted according to assembly plan, manufacturer specifications, and safety and environmental requirements, and without causing damage to components or systems
2.4 Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
2.5 Assembly is checked to ensure it complies with ACCC product safety standards
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and safety requirements, and bicycle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
assemble three different new boxed bicycles for retail sale, including:
one with gears
one with disc brakes
fit and adjust the following components during the above assemblies:
head stem and bearings
disc and rim brakes
seats
wheels
pedals
sprockets, gears and chains.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to assembling boxed bicycles, including procedures for manually handling bicycles
environmental requirements, including procedures for:
trapping, storing and disposing of waste grease and oils
reusing or recycling surplus boxes
Australian Competition and Consumer Commission (ACCC) product safety standards relating to assembling bicycles
key bicycle component and accessory terminology
types of bicycles and their key features
procedures for assembling and adjusting bicycles, including:
types and use of bicycle assembly tools and equipment, including torque wrenches
bicycle measuring techniques
accessory and component fitting and adjustment procedures for the components specified in the performance evidence
greasing and lubrication procedures
bicycle testing procedures, including post-assembly adjustment and safety checks.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the new boxed bicycles that they have assembled, e.g. bicycle assembly orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
bicycle workplace or simulated workplace
workplace instructions
ACCC product safety standards relating to bicycles
three different new boxed bicycles requiring assembly
tools and equipment appropriate for assembling boxed bicycles.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to assemble new bicycle
1.1 Job requirements are determined from workplace instructions
1.2 Bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles are accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Assembly tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Assemble bicycle
2.1 Bicycle is unpacked and checked to ensure all components are included and not damaged
2.2 Missing or damaged components are reported according to workplace procedures
2.3 Bicycle and components are assembled and lubricated, and fastener tensions adjusted according to assembly plan, manufacturer specifications, and safety and environmental requirements, and without causing damage to components or systems
2.4 Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
2.5 Assembly is checked to ensure it complies with ACCC product safety standards
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and safety requirements, and bicycle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for manually handling bicycles
environmental requirements, including procedures for:
trapping, storing and disposing of waste grease and oils
reusing or recycling surplus boxes.
Assemblymust include:
accessories, including:
bell
reflectors
controls
handlebars
seat.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
assemble three different new boxed bicycles for retail sale, including:
one with gears
one with disc brakes
fit and adjust the following components during the above assemblies:
head stem and bearings
disc and rim brakes
seats
wheels
pedals
sprockets, gears and chains.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to assembling boxed bicycles, including procedures for manually handling bicycles
environmental requirements, including procedures for:
trapping, storing and disposing of waste grease and oils
reusing or recycling surplus boxes
Australian Competition and Consumer Commission (ACCC) product safety standards relating to assembling bicycles
key bicycle component and accessory terminology
types of bicycles and their key features
procedures for assembling and adjusting bicycles, including:
types and use of bicycle assembly tools and equipment, including torque wrenches
bicycle measuring techniques
accessory and component fitting and adjustment procedures for the components specified in the performance evidence
greasing and lubrication procedures
bicycle testing procedures, including post-assembly adjustment and safety checks.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the new boxed bicycles that they have assembled, e.g. bicycle assembly orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
bicycle workplace or simulated workplace
workplace instructions
ACCC product safety standards relating to bicycles
three different new boxed bicycles requiring assembly
tools and equipment appropriate for assembling boxed bicycles.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles are accessed and interpreted
Hazards associated with the work are identified and risks are managed
Assembly tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work area is prepared and work is planned to minimise waste and use time efficiently
Bicycle is unpacked and checked to ensure all components are included and not damaged
Missing or damaged components are reported according to workplace procedures
Bicycle and components are assembled and lubricated, and fastener tensions adjusted according to assembly plan, manufacturer specifications, and safety and environmental requirements, and without causing damage to components or systems
Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
Assembly is checked to ensure it complies with ACCC product safety standards
Final inspection is made to ensure work meets workplace expectations and safety requirements, and bicycle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles are accessed and interpreted
Hazards associated with the work are identified and risks are managed
Assembly tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work area is prepared and work is planned to minimise waste and use time efficiently
Bicycle is unpacked and checked to ensure all components are included and not damaged
Missing or damaged components are reported according to workplace procedures
Bicycle and components are assembled and lubricated, and fastener tensions adjusted according to assembly plan, manufacturer specifications, and safety and environmental requirements, and without causing damage to components or systems
Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
Assembly is checked to ensure it complies with ACCC product safety standards
Final inspection is made to ensure work meets workplace expectations and safety requirements, and bicycle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURBTA004 - Assemble new boxed bicycles for retail sale
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURBTA004 - Assemble new boxed bicycles for retail sale
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent