AURETR021 - Inspect, service and repair electronic management, monitoring and tracking systems
Assessor Resource
AURETR021 Inspect, service and repair electronic management, monitoring and tracking systems
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to inspect, service and repair electronic monitoring, management and tracking systems fitted to heavy vehicles or machinery. It involves preparing for the task, inspecting the systems, repairing the systems, and completing workplace processes and documentation, including any associated recommendations for further action.
It applies to those working in the automotive service and repair industry. The electronic management, monitoring and tracking systems include those in heavy vehicles, agricultural machinery or mobile plant machinery.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to inspect, service and repair electronic management, monitoring and tracking system
1.1 Job requirements are determined according to workplace instructions
1.2 Inspection, servicing and repair procedures are accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and electrical test equipment are selected and checked for serviceability
2. Inspect and test system
2.1 System is inspected and tested according to workplace procedures and safety requirements
2.2 Circuits are tested according to workplace procedures and without causing damage to components or systems
2.3 Inspection results are compared with manufacturer specifications
2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service and repair system
3.1 System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.2 System is performance tested and final adjustments are made
3.3 Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
inspect, service and repair three of the following electronic management, monitoring and tracking systems:
receivers
displays
electronic controllers
steering actuators
telematics
connectors and harnesses.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing electronic management, monitoring and tracking systems, including procedures for:
using personal protective equipment (PPE), including clothing, and eye and hand protection
working safely with high current electrical systems
environmental requirements, including procedures:
found in safety data sheets (SDS) relating to toxic and corrosive substances
for recycling and disposing of replaced electronic management, monitoring and tracking system components
operating principles of electronic management, monitoring and tracking systems, including:
system overview
global positioning system (GPS)
electronic sensors and processors
electrical actuators
application, purpose and operation of electronic management, monitoring and tracking systems, including:
receivers
displays
electronic controllers
steering actuators
telematics
connectors and harnesses
techniques for reading and interpreting automotive technical information, graphic symbols and wiring diagrams
inspection procedures, including:
analysing system operation
identifying software versions
interrogating electronic fault codes
testing electrical systems, including procedures for accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring
service and repair procedures, including:
component removal and replacement procedures
downloading and installing relevant component software
component and associated system adjustment procedures to include variable operating conditions
post-repair testing procedures, including:
confirming that vehicle or machinery electronic monitoring, management and tracking systems are serviceable and operating to manufacturer specifications
confirming that no other problems are present as a result of the repair.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the electronic management, monitoring and tracking system that they have inspected, serviced and repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer specifications for electronic management, monitoring and tracking systems
PPE, including clothing, and eye and hand protection
vehicles or machinery with the electronic management, monitoring and tracking systems specified in the performance evidence requiring service or repair
tools, equipment and materials appropriate for inspecting, servicing and repairing electronic management, monitoring and tracking systems, including scan tool.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to inspect, service and repair electronic management, monitoring and tracking system
1.1 Job requirements are determined according to workplace instructions
1.2 Inspection, servicing and repair procedures are accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and electrical test equipment are selected and checked for serviceability
2. Inspect and test system
2.1 System is inspected and tested according to workplace procedures and safety requirements
2.2 Circuits are tested according to workplace procedures and without causing damage to components or systems
2.3 Inspection results are compared with manufacturer specifications
2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service and repair system
3.1 System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.2 System is performance tested and final adjustments are made
3.3 Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE), including clothing, and eye and hand protection
working safely with high current electrical systems.
Environmental requirements must include:
procedures:
found in safety data sheets (SDS) relating to toxic and corrosive substances
for recycling and disposing of replaced electronic management, monitoring and tracking system components.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
inspect, service and repair three of the following electronic management, monitoring and tracking systems:
receivers
displays
electronic controllers
steering actuators
telematics
connectors and harnesses.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing electronic management, monitoring and tracking systems, including procedures for:
using personal protective equipment (PPE), including clothing, and eye and hand protection
working safely with high current electrical systems
environmental requirements, including procedures:
found in safety data sheets (SDS) relating to toxic and corrosive substances
for recycling and disposing of replaced electronic management, monitoring and tracking system components
operating principles of electronic management, monitoring and tracking systems, including:
system overview
global positioning system (GPS)
electronic sensors and processors
electrical actuators
application, purpose and operation of electronic management, monitoring and tracking systems, including:
receivers
displays
electronic controllers
steering actuators
telematics
connectors and harnesses
techniques for reading and interpreting automotive technical information, graphic symbols and wiring diagrams
inspection procedures, including:
analysing system operation
identifying software versions
interrogating electronic fault codes
testing electrical systems, including procedures for accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring
service and repair procedures, including:
component removal and replacement procedures
downloading and installing relevant component software
component and associated system adjustment procedures to include variable operating conditions
post-repair testing procedures, including:
confirming that vehicle or machinery electronic monitoring, management and tracking systems are serviceable and operating to manufacturer specifications
confirming that no other problems are present as a result of the repair.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the electronic management, monitoring and tracking system that they have inspected, serviced and repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer specifications for electronic management, monitoring and tracking systems
PPE, including clothing, and eye and hand protection
vehicles or machinery with the electronic management, monitoring and tracking systems specified in the performance evidence requiring service or repair
tools, equipment and materials appropriate for inspecting, servicing and repairing electronic management, monitoring and tracking systems, including scan tool.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined according to workplace instructions
Inspection, servicing and repair procedures are accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and electrical test equipment are selected and checked for serviceability
System is inspected and tested according to workplace procedures and safety requirements
Circuits are tested according to workplace procedures and without causing damage to components or systems
Inspection results are compared with manufacturer specifications
Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
System is performance tested and final adjustments are made
Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined according to workplace instructions
Inspection, servicing and repair procedures are accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and electrical test equipment are selected and checked for serviceability
System is inspected and tested according to workplace procedures and safety requirements
Circuits are tested according to workplace procedures and without causing damage to components or systems
Inspection results are compared with manufacturer specifications
Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
System is performance tested and final adjustments are made
Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURETR021 - Inspect, service and repair electronic management, monitoring and tracking systems
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURETR021 - Inspect, service and repair electronic management, monitoring and tracking systems
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent