AURHTA003 - Remove and replace heavy commercial vehicle ancillary components and accessories
Assessor Resource
AURHTA003 Remove and replace heavy commercial vehicle ancillary components and accessories
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to remove, replace and make adjustments to heavy commercial vehicle ancillary components and accessories. It involves preparing for the work, removing and replacing components or accessories, and completing workplace processes and documentation.
It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and inspect ancillary components or accessories
1.1 Task requirements are determined from workshop or activity instructions
1.2 Removal and replacement procedures and information are sourced and interpreted
1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect ancillary components or accessories
2.1 Ancillary components or accessories are identified and removed according to manufacturer specifications and without causing damage to components or systems
2.2 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety requirements
2.3 Inspection findings are reported according to workplace procedures
3. Replace ancillary components or accessories
3.1 Ancillary components or accessories are replaced according to manufacturer specifications, and without causing damage to components or systems
3.2 Adjustments are made to components or accessories according to manufacturer specifications
3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
4. Complete work processes
4.1 Final inspection is made to ensure work meets task instructions and workplace standards
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove and replace three of the following heavy commercial vehicle ancillary components and accessories:
rear vision mirrors
mudguards and mudflaps
ancillary lighting system
dust deflectors
reflectors
trim
audio systems
adhesive signage and stickers
exhaust system ancillary components.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing heavy vehicle ancillary components and accessories, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment
procedures and specifications for removing, replacing and adjusting heavy vehicle ancillary components and accessories required for the task
types, application and operation of specialist tools and equipment for removing and replacing heavy commercial vehicle ancillary components and accessories
post-adjustment testing procedures for heavy commercial vehicle ancillary components and accessories.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy commercial vehicle ancillary components and accessories that they have removed and replaced, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer component and accessory specifications
heavy vehicles requiring the removal, replacement and adjustment of the ancillary components and accessories specified in the performance evidence
tools, equipment and materials appropriate for removing and replacing heavy commercial vehicle components and accessories.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and inspect ancillary components or accessories
1.1 Task requirements are determined from workshop or activity instructions
1.2 Removal and replacement procedures and information are sourced and interpreted
1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect ancillary components or accessories
2.1 Ancillary components or accessories are identified and removed according to manufacturer specifications and without causing damage to components or systems
2.2 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety requirements
2.3 Inspection findings are reported according to workplace procedures
3. Replace ancillary components or accessories
3.1 Ancillary components or accessories are replaced according to manufacturer specifications, and without causing damage to components or systems
3.2 Adjustments are made to components or accessories according to manufacturer specifications
3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
4. Complete work processes
4.1 Final inspection is made to ensure work meets task instructions and workplace standards
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove and replace three of the following heavy commercial vehicle ancillary components and accessories:
rear vision mirrors
mudguards and mudflaps
ancillary lighting system
dust deflectors
reflectors
trim
audio systems
adhesive signage and stickers
exhaust system ancillary components.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing heavy vehicle ancillary components and accessories, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment
procedures and specifications for removing, replacing and adjusting heavy vehicle ancillary components and accessories required for the task
types, application and operation of specialist tools and equipment for removing and replacing heavy commercial vehicle ancillary components and accessories
post-adjustment testing procedures for heavy commercial vehicle ancillary components and accessories.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy commercial vehicle ancillary components and accessories that they have removed and replaced, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer component and accessory specifications
heavy vehicles requiring the removal, replacement and adjustment of the ancillary components and accessories specified in the performance evidence
tools, equipment and materials appropriate for removing and replacing heavy commercial vehicle components and accessories.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Task requirements are determined from workshop or activity instructions
Removal and replacement procedures and information are sourced and interpreted
Potential hazards and risks associated with the task are identified and reported to workplace supervisor
Tools, equipment and materials are selected and checked for serviceability
Ancillary components or accessories are identified and removed according to manufacturer specifications and without causing damage to components or systems
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety requirements
Inspection findings are reported according to workplace procedures
Ancillary components or accessories are replaced according to manufacturer specifications, and without causing damage to components or systems
Adjustments are made to components or accessories according to manufacturer specifications
Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
Final inspection is made to ensure work meets task instructions and workplace standards
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Task requirements are determined from workshop or activity instructions
Removal and replacement procedures and information are sourced and interpreted
Potential hazards and risks associated with the task are identified and reported to workplace supervisor
Tools, equipment and materials are selected and checked for serviceability
Ancillary components or accessories are identified and removed according to manufacturer specifications and without causing damage to components or systems
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety requirements
Inspection findings are reported according to workplace procedures
Ancillary components or accessories are replaced according to manufacturer specifications, and without causing damage to components or systems
Adjustments are made to components or accessories according to manufacturer specifications
Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
Final inspection is made to ensure work meets task instructions and workplace standards
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURHTA003 - Remove and replace heavy commercial vehicle ancillary components and accessories
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURHTA003 - Remove and replace heavy commercial vehicle ancillary components and accessories
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent