AURHTJ003 - Remove, inspect and refit heavy vehicle wheel and tyre assemblies
Assessor Resource
AURHTJ003 Remove, inspect and refit heavy vehicle wheel and tyre assemblies
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to remove, inspect and refit the wheel and tyre assemblies of heavy vehicles. It involves identifying and confirming work requirements; preparing for the work; removing, inspecting and refitting the wheel and tyre assembly; and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The wheel and tyre assemblies include those of agricultural machinery, forklifts, heavy commercial vehicles or mobile plant machinery. This unit does not apply to off-the-road tyres of mobile plant machinery.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove wheel and tyre assembly
1.1 Job requirements are determined from workplace instructions
1.2 Removal, inspection and refitting information is sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect wheel and tyre assembly
2.1 Wheel and tyre assembly is removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
2.2 Wheel and tyre assembly, mounting points and attachment devices are inspected for condition, damage and wear
2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs, replacements or adjustments
3. Refit wheel and tyre assembly
3.1 Refitting options are analysed and those most appropriate to the circumstances are selected
3.2 Wheel and tyre assembly is fitted and adjusted according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
3.3 Tightening sequence and torque settings are completed according to manufacturer specifications and workplace procedures
3.4 Wheel and tyre assembly is checked for correct assembly, run-out and alignment according to manufacturer specifications and workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, inspect, refit and adjust the wheel and tyre assemblies on the steer and drive axle dual wheels of a heavy vehicle
remove, inspect, refit and adjust the demountable rim and tyre assemblies on the steer and drive axle dual wheels of a second heavy vehicle.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to heavy vehicle wheel and tyre assemblies, including procedures for:
working with wheel and tyre assemblies and air inflation pressures
working with two piece split wheels, split and multi-piece wheels and rims
manually handling wheel and tyre assemblies
lifting and supporting heavy vehicles
types and applications of wheel assemblies, including:
cast spoke wheels
disc wheels, including:
stud piloted wheels
hub piloted wheels
studs and nuts for disc wheels
two piece split wheels
demountable rims, including:
single piece tyre-to-rim assemblies
multi-piece tyre-to-rim assemblies
spacer band
rim clamps, studs and nuts for demountable rims
procedures for removing, inspecting and refitting heavy vehicle wheel and tyre assemblies, including:
wheel nut tensioning procedures
manufacturer wheel and tyre assembly specifications appropriate to the assemblies specified in the performance evidence
post-fitting procedures and checks of heavy vehicle wheel and tyre assemblies, including wheel and tyre assembly run-out.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy vehicle wheel and tyre assemblies that they have worked on e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer wheel and tyre assembly specifications
two different heavy vehicles and heavy vehicle wheel and tyre assemblies, including:
disc wheels and tyres
demountable rims, tyres and cast spoke wheels
tools, equipment and materials appropriate for removing, inspecting and refitting heavy vehicle wheel and tyre assemblies.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove wheel and tyre assembly
1.1 Job requirements are determined from workplace instructions
1.2 Removal, inspection and refitting information is sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect wheel and tyre assembly
2.1 Wheel and tyre assembly is removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
2.2 Wheel and tyre assembly, mounting points and attachment devices are inspected for condition, damage and wear
2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs, replacements or adjustments
3. Refit wheel and tyre assembly
3.1 Refitting options are analysed and those most appropriate to the circumstances are selected
3.2 Wheel and tyre assembly is fitted and adjusted according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
3.3 Tightening sequence and torque settings are completed according to manufacturer specifications and workplace procedures
3.4 Wheel and tyre assembly is checked for correct assembly, run-out and alignment according to manufacturer specifications and workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Wheel and tyre assembly mustinclude:
tyre and demountable rim assembly
tyre and disc wheel.
Safety requirements mustinclude:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
working with wheel and tyre assemblies and air inflation pressures
working with two piece split wheels, split and multi-piece wheels and rims
manually handling wheel and tyre assemblies
lifting and supporting heavy vehicles.
Final inspection must include:
wheel and tyre assembly run-out and alignment testing
testing the operation of vehicle systems affected by the removal and refitting of wheel and tyre assemblies
rechecking tightness of attachment devices.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, inspect, refit and adjust the wheel and tyre assemblies on the steer and drive axle dual wheels of a heavy vehicle
remove, inspect, refit and adjust the demountable rim and tyre assemblies on the steer and drive axle dual wheels of a second heavy vehicle.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to heavy vehicle wheel and tyre assemblies, including procedures for:
working with wheel and tyre assemblies and air inflation pressures
working with two piece split wheels, split and multi-piece wheels and rims
manually handling wheel and tyre assemblies
lifting and supporting heavy vehicles
types and applications of wheel assemblies, including:
cast spoke wheels
disc wheels, including:
stud piloted wheels
hub piloted wheels
studs and nuts for disc wheels
two piece split wheels
demountable rims, including:
single piece tyre-to-rim assemblies
multi-piece tyre-to-rim assemblies
spacer band
rim clamps, studs and nuts for demountable rims
procedures for removing, inspecting and refitting heavy vehicle wheel and tyre assemblies, including:
wheel nut tensioning procedures
manufacturer wheel and tyre assembly specifications appropriate to the assemblies specified in the performance evidence
post-fitting procedures and checks of heavy vehicle wheel and tyre assemblies, including wheel and tyre assembly run-out.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy vehicle wheel and tyre assemblies that they have worked on e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer wheel and tyre assembly specifications
two different heavy vehicles and heavy vehicle wheel and tyre assemblies, including:
disc wheels and tyres
demountable rims, tyres and cast spoke wheels
tools, equipment and materials appropriate for removing, inspecting and refitting heavy vehicle wheel and tyre assemblies.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Removal, inspection and refitting information is sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Wheel and tyre assembly is removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
Wheel and tyre assembly, mounting points and attachment devices are inspected for condition, damage and wear
Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs, replacements or adjustments
Refitting options are analysed and those most appropriate to the circumstances are selected
Wheel and tyre assembly is fitted and adjusted according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
Tightening sequence and torque settings are completed according to manufacturer specifications and workplace procedures
Wheel and tyre assembly is checked for correct assembly, run-out and alignment according to manufacturer specifications and workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Removal, inspection and refitting information is sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Wheel and tyre assembly is removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
Wheel and tyre assembly, mounting points and attachment devices are inspected for condition, damage and wear
Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs, replacements or adjustments
Refitting options are analysed and those most appropriate to the circumstances are selected
Wheel and tyre assembly is fitted and adjusted according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
Tightening sequence and torque settings are completed according to manufacturer specifications and workplace procedures
Wheel and tyre assembly is checked for correct assembly, run-out and alignment according to manufacturer specifications and workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURHTJ003 - Remove, inspect and refit heavy vehicle wheel and tyre assemblies
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURHTJ003 - Remove, inspect and refit heavy vehicle wheel and tyre assemblies
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent