AURHTJ004 - Remove, inspect, repair and refit agricultural equipment tyres and tubes
Assessor Resource
AURHTJ004 Remove, inspect, repair and refit agricultural equipment tyres and tubes
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to remove and refit tyres and tubes from the wheels and rims of agricultural equipment. It involves identifying and confirming work requirements, preparing for the work; inspecting, repairing and refitting the tyres and tubes, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove, repair and refit agricultural tyres and tubes
1.1 Job requirements are determined from workplace instructions
1.2 Tyre and tube remove, inspect, repair and refit information is sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect tyres, tubes and wheels
2.1 Tyres and tubes are removed from wheels according to manufacturer procedures, workplace procedures and safety and environmental requirements
2.2 Tyres, tubes, wheels or rims are inspected according to manufacturer specifications and workplace procedures
2.3 Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
3. Repair and refit tyres and tubes
3.1 Repair options are analysed and those most appropriate to the circumstances are selected
3.2 Tyres and tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
3.3 Tyre is mounted to wheel or rim according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
3.4 Assembled wheel is checked for serviceability and correct assembly, and is inflated according to manufacturer specifications and workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and assembled wheel is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, inspect, repair and refit agricultural tyres and tubes, including:
two tyres and tubes fitted to split or multi-piece wheels
two tyres and tubes fitted to drop centre wheels.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) relating to agricultural tyres and tubes, including procedures for:
deflating and inflating tyres on agricultural equipment
raising and supporting machinery on unstable surfaces
manual handling when lifting wheel assemblies
removing, repairing and refitting tyres and tubes
environmental requirements, including procedures for trapping and disposing of tyre material produced during repair procedures
procedures for removing, inspecting, repairing and refitting tyres and tubes, including:
rim or hub mounted multi-piece rims
one piece wheels
types and applications of tyres, tubes, wheels and rims, including:
radial and bias ply tyres
tubed and tubeless tyres
rim or hub mounted multi-piece wheels
one piece wheels
types, application and operation of tyre changing equipment and tyre and tube repair equipment
post-fitting procedures and checks of agricultural tyres and tubes.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the agricultural tyres and tubes that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer tyre and tube repair procedures and specifications
agricultural tyres and tubes specified in the performance evidence
tools, equipment and materials appropriate for removing, inspecting, repairing and fitting agricultural tyres and tubes, including:
tyre and tube repair tools and equipment
tyre and tube repair consumables
tyre changing tools and equipment.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove, repair and refit agricultural tyres and tubes
1.1 Job requirements are determined from workplace instructions
1.2 Tyre and tube remove, inspect, repair and refit information is sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect tyres, tubes and wheels
2.1 Tyres and tubes are removed from wheels according to manufacturer procedures, workplace procedures and safety and environmental requirements
2.2 Tyres, tubes, wheels or rims are inspected according to manufacturer specifications and workplace procedures
2.3 Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
3. Repair and refit tyres and tubes
3.1 Repair options are analysed and those most appropriate to the circumstances are selected
3.2 Tyres and tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
3.3 Tyre is mounted to wheel or rim according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
3.4 Assembled wheel is checked for serviceability and correct assembly, and is inflated according to manufacturer specifications and workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and assembled wheel is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
deflating and inflating tyres on agricultural equipment
raising and supporting machinery on unstable surfaces
manual handling when lifting wheel assemblies
removing, repairing and refitting tyres and tubes
environmental requirements, including procedures for trapping and disposing of tyre material produced during repair procedures.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, inspect, repair and refit agricultural tyres and tubes, including:
two tyres and tubes fitted to split or multi-piece wheels
two tyres and tubes fitted to drop centre wheels.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) relating to agricultural tyres and tubes, including procedures for:
deflating and inflating tyres on agricultural equipment
raising and supporting machinery on unstable surfaces
manual handling when lifting wheel assemblies
removing, repairing and refitting tyres and tubes
environmental requirements, including procedures for trapping and disposing of tyre material produced during repair procedures
procedures for removing, inspecting, repairing and refitting tyres and tubes, including:
rim or hub mounted multi-piece rims
one piece wheels
types and applications of tyres, tubes, wheels and rims, including:
radial and bias ply tyres
tubed and tubeless tyres
rim or hub mounted multi-piece wheels
one piece wheels
types, application and operation of tyre changing equipment and tyre and tube repair equipment
post-fitting procedures and checks of agricultural tyres and tubes.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the agricultural tyres and tubes that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
manufacturer tyre and tube repair procedures and specifications
agricultural tyres and tubes specified in the performance evidence
tools, equipment and materials appropriate for removing, inspecting, repairing and fitting agricultural tyres and tubes, including:
tyre and tube repair tools and equipment
tyre and tube repair consumables
tyre changing tools and equipment.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Tyre and tube remove, inspect, repair and refit information is sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Tyres and tubes are removed from wheels according to manufacturer procedures, workplace procedures and safety and environmental requirements
Tyres, tubes, wheels or rims are inspected according to manufacturer specifications and workplace procedures
Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
Repair options are analysed and those most appropriate to the circumstances are selected
Tyres and tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
Tyre is mounted to wheel or rim according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
Assembled wheel is checked for serviceability and correct assembly, and is inflated according to manufacturer specifications and workplace procedures
Final inspection is made to ensure work is to workplace expectations and assembled wheel is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Tyre and tube remove, inspect, repair and refit information is sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Tyres and tubes are removed from wheels according to manufacturer procedures, workplace procedures and safety and environmental requirements
Tyres, tubes, wheels or rims are inspected according to manufacturer specifications and workplace procedures
Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
Repair options are analysed and those most appropriate to the circumstances are selected
Tyres and tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
Tyre is mounted to wheel or rim according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
Assembled wheel is checked for serviceability and correct assembly, and is inflated according to manufacturer specifications and workplace procedures
Final inspection is made to ensure work is to workplace expectations and assembled wheel is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURHTJ004 - Remove, inspect, repair and refit agricultural equipment tyres and tubes
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURHTJ004 - Remove, inspect, repair and refit agricultural equipment tyres and tubes
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent