AURHTQ002 - Diagnose and repair heavy commercial vehicle final drive assemblies
Assessor Resource
AURHTQ002 Diagnose and repair heavy commercial vehicle final drive assemblies
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to diagnose and repair faults in the final drive assemblies of heavy commercial vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The final drive assemblies include those in heavy commercial vehicles. This unit does not apply to agricultural machinery or mobile plant machinery.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair heavy commercial vehicle final drive assembly
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked for serviceability
2. Diagnose final drive assembly
2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
3. Repair final drive assembly
3.1 Repair information is sourced and interpreted
3.2 Repair options are analysed and those most appropriate to the circumstances are selected
3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures
3.3 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.4 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or assembly is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
diagnose and repair a fault in one heavy commercial vehicle final drive assembly and:
undertake a complete dismantle and reassembly of a crown wheel and pinion final drive assembly
remove, refit or replace one final drive assembly
remove, refit or replace one rear axle wheel bearing assembly.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing heavy commercial vehicle final drive assemblies, including procedures for:
isolating and stabilising vehicles
lifting and supporting final drive assemblies
environmental requirements, including procedures for trapping, storing and disposing of oil released from final drive assemblies
operating principles of heavy commercial vehicle final drive assemblies and associated components, including:
final drive gears, including:
gear types
gear ratios and torque reduction and multiplication
differential function
application, purpose and operation of heavy commercial vehicle final drive assemblies and components, including:
single reduction
two-speed reduction
double reduction
tandem drive
power divider
differentials, including limited slip differentials
axle shafts and bearings
diagnostic testing procedures for heavy commercial vehicle final drive assemblies, including:
road-testing procedures, including:
final drive assembly noise diagnosis
final drive assembly operation
pre-dismantling inspection procedures
repair procedures for heavy commercial vehicle final drive assemblies, including procedures for:
dismantling assemblies
inspecting assemblies
reassembling and adjusting the following components:
pinion depth
pinion bearing preload
crown wheel and pinion backlash
side bearing preload
crown wheel and pinion tooth contact
post-repair testing procedures for heavy commercial vehicle final drive assemblies.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy commercial vehicle final drive assemblies that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
mechanical repair workplace or simulated workplace
workplace instructions
manufacturer final drive assembly specifications
heavy commercial vehicle crown wheel and pinion final drive assembly with faults
diagnostic equipment for heavy commercial vehicle final drive assemblies
tools, equipment and materials appropriate for repairing and adjusting heavy commercial vehicle final drive assemblies.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair heavy commercial vehicle final drive assembly
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked for serviceability
2. Diagnose final drive assembly
2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
3. Repair final drive assembly
3.1 Repair information is sourced and interpreted
3.2 Repair options are analysed and those most appropriate to the circumstances are selected
3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures
3.3 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.4 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or assembly is presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
isolating and stabilising vehicles
lifting and supporting final drive assemblies.
Environmental requirements must include:
procedures for trapping, storing and disposing of oil released from final drive assemblies.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
diagnose and repair a fault in one heavy commercial vehicle final drive assembly and:
undertake a complete dismantle and reassembly of a crown wheel and pinion final drive assembly
remove, refit or replace one final drive assembly
remove, refit or replace one rear axle wheel bearing assembly.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing heavy commercial vehicle final drive assemblies, including procedures for:
isolating and stabilising vehicles
lifting and supporting final drive assemblies
environmental requirements, including procedures for trapping, storing and disposing of oil released from final drive assemblies
operating principles of heavy commercial vehicle final drive assemblies and associated components, including:
final drive gears, including:
gear types
gear ratios and torque reduction and multiplication
differential function
application, purpose and operation of heavy commercial vehicle final drive assemblies and components, including:
single reduction
two-speed reduction
double reduction
tandem drive
power divider
differentials, including limited slip differentials
axle shafts and bearings
diagnostic testing procedures for heavy commercial vehicle final drive assemblies, including:
road-testing procedures, including:
final drive assembly noise diagnosis
final drive assembly operation
pre-dismantling inspection procedures
repair procedures for heavy commercial vehicle final drive assemblies, including procedures for:
dismantling assemblies
inspecting assemblies
reassembling and adjusting the following components:
pinion depth
pinion bearing preload
crown wheel and pinion backlash
side bearing preload
crown wheel and pinion tooth contact
post-repair testing procedures for heavy commercial vehicle final drive assemblies.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the heavy commercial vehicle final drive assemblies that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
mechanical repair workplace or simulated workplace
workplace instructions
manufacturer final drive assembly specifications
heavy commercial vehicle crown wheel and pinion final drive assembly with faults
diagnostic equipment for heavy commercial vehicle final drive assemblies
tools, equipment and materials appropriate for repairing and adjusting heavy commercial vehicle final drive assemblies.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked for serviceability
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repair tools, equipment and materials are selected and checked according to manufacturer procedures
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vehicle or assembly is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked for serviceability
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repair tools, equipment and materials are selected and checked according to manufacturer procedures
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vehicle or assembly is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURHTQ002 - Diagnose and repair heavy commercial vehicle final drive assemblies
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURHTQ002 - Diagnose and repair heavy commercial vehicle final drive assemblies
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent