Assessor Resource

AURJTX003
Diagnose and repair motorcycle automatic transmissions

Assessment tool

Version 1.0
Issue Date: September 2018


This unit describes the performance outcomes required to diagnose and repair faults in the automatic transmissions of motorcycles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.

It applies to those working in the automotive service and repair industry.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair motorcycle automatic transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnosis options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose automatic transmission

2.1 Diagnostic tests are carried out according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair automatic transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in two different motorcycles with different automatic transmissions, in which the work must involve removing, dismantling, reassembling and refitting the transmissions.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing motorcycle automatic transmissions, including procedures for handling transmission fluids and clutch materials

environmental requirements, including procedures for trapping, storing and disposing of fluids released from transmissions

operating principles of motorcycle automatic transmissions and associated components, including:

gears types

gear ratios

application, purpose and operation of the following motorcycle automatic transmissions and components, including:

continuously variable transmissions (CVT), including:

wet types

dry types

semi-automatic transmissions

dual clutch transmissions

automatic transmission electronic components, including:

electronic control module

input sensors, including vehicle speed sensor, throttle position sensor, mass air flow (MAF) sensor, manifold absolute pressure (MAP) sensor, transmission range sensor, engine speed sensor and temperature sensors

electronic control module outputs, including indicator lamps, shift solenoids and pressure control solenoids

types and compatibility of transmission system oils and additives

types of diagnostic trouble codes and procedures for accessing codes

diagnostic testing procedures for motorcycle automatic transmissions, including procedures for analysing:

component wear

abnormal system noise

repair procedures for motorcycle automatic transmissions, including procedures for removing, dismantling, reassembling, refitting and adjusting components

post-repair testing procedures for motorcycle automatic transmissions.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the motorcycle automatic transmissions that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

motorcycle repair workplace or simulated workplace

workplace instructions

manufacturer motorcycle automatic transmission specifications

two different motorcycles with different automatic transmissions with faults

diagnostic equipment for motorcycle automatic transmissions

tools, equipment and materials appropriate for repairing motorcycle automatic transmissions.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair motorcycle automatic transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnosis options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose automatic transmission

2.1 Diagnostic tests are carried out according to workplace procedures and safety and environmental requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair automatic transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for handling transmission fluids and clutch materials

environmental requirements, including procedures for trapping, storing and disposing of fluids released from transmissions.

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in two different motorcycles with different automatic transmissions, in which the work must involve removing, dismantling, reassembling and refitting the transmissions.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing motorcycle automatic transmissions, including procedures for handling transmission fluids and clutch materials

environmental requirements, including procedures for trapping, storing and disposing of fluids released from transmissions

operating principles of motorcycle automatic transmissions and associated components, including:

gears types

gear ratios

application, purpose and operation of the following motorcycle automatic transmissions and components, including:

continuously variable transmissions (CVT), including:

wet types

dry types

semi-automatic transmissions

dual clutch transmissions

automatic transmission electronic components, including:

electronic control module

input sensors, including vehicle speed sensor, throttle position sensor, mass air flow (MAF) sensor, manifold absolute pressure (MAP) sensor, transmission range sensor, engine speed sensor and temperature sensors

electronic control module outputs, including indicator lamps, shift solenoids and pressure control solenoids

types and compatibility of transmission system oils and additives

types of diagnostic trouble codes and procedures for accessing codes

diagnostic testing procedures for motorcycle automatic transmissions, including procedures for analysing:

component wear

abnormal system noise

repair procedures for motorcycle automatic transmissions, including procedures for removing, dismantling, reassembling, refitting and adjusting components

post-repair testing procedures for motorcycle automatic transmissions.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the motorcycle automatic transmissions that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

motorcycle repair workplace or simulated workplace

workplace instructions

manufacturer motorcycle automatic transmission specifications

two different motorcycles with different automatic transmissions with faults

diagnostic equipment for motorcycle automatic transmissions

tools, equipment and materials appropriate for repairing motorcycle automatic transmissions.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnosis options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to workplace procedures and safety and environmental requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and checked 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnosis options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to workplace procedures and safety and environmental requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and checked 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, safety and environmental requirements, and without causing damage to components or system 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURJTX003 - Diagnose and repair motorcycle automatic transmissions
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURJTX003 - Diagnose and repair motorcycle automatic transmissions

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: