Assessor Resource

AURKTX001
Diagnose and repair powershift transmissions

Assessment tool

Version 1.0
Issue Date: March 2024


This unit describes the performance outcomes required to diagnose and repair faults in powershift transmissions. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.

It applies to those working in the automotive service and repair industry. The powershift transmissions include those in agricultural machinery or mobile plant machinery.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair powershift transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose powershift transmission

2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures

3. Repair powershift transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery or transmission is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in two different vehicles or machines with the following powershift transmissions:

multiple countershaft transmission

planetary shift transmission

conduct powershift transmission stall test during above work according to manufacturer specifications and workplace procedures.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing powershift transmissions, including procedures for isolating and stabilising machines

environmental requirements, including procedures for trapping, storing and disposing of hydraulic fluid released from powershift transmissions

operating principles of powershift transmissions and associated components, including:

torque converters, torque divider torque converters and variable capacity torque converters

electronically modulated transmission

countershaft transmissions, including:

gear types

gear ratios and torque reduction and multiplication

simple and compound gear trains

compound planetary transmissions, including:

gear types

gear ratios and torque reduction and multiplication

simple and compound planetary gear trains

transmission control valves and solenoids

hydraulic circuits and schematics

application, purpose and operation of powershift transmissions and components, including:

power flows in:

multiple countershaft transmissions

compound planetary transmissions

torque converters, torque divider torque converters, and variable capacity torque converters

hydraulic components and hydraulic control components, including:

oil pumps

hydraulic valves

electronic transmission pressure modulation

power train electronic control system

mechanical components, including:

clutch packs

one-way clutches

planetary gears

compound gear sets

powershift electronic control systems

transfer cases

hydraulic oils and filters

diagnostic testing procedures for powershift transmissions, including:

following safety requirements when stall testing

stall testing according to manufacturer specifications and workplace procedures

dismantling procedures for powershift transmissions, including:

measuring clearances and tolerances

inspecting components

repair procedures for powershift transmissions, including procedures for inspecting, evaluating and measuring component wear

post-repair testing procedures for powershift transmissions, including:

stall testingaccording to manufacturer specifications and workplace procedures.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the powershift transmissions that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

manufacturer powershift transmission specifications

two different vehicles or machines with powershift transmission faults

diagnostic equipment for powershift transmissions

tools, equipment and materials appropriate for repairing and adjusting powershift transmissions.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair powershift transmission

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose powershift transmission

2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures

3. Repair powershift transmission

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked according to manufacturer procedures

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery or transmission is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for isolating and stabilising machines.

Environmental requirements must include:

procedures for trapping, storing and disposing of hydraulic fluid released from powershift transmissions.

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in two different vehicles or machines with the following powershift transmissions:

multiple countershaft transmission

planetary shift transmission

conduct powershift transmission stall test during above work according to manufacturer specifications and workplace procedures.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing powershift transmissions, including procedures for isolating and stabilising machines

environmental requirements, including procedures for trapping, storing and disposing of hydraulic fluid released from powershift transmissions

operating principles of powershift transmissions and associated components, including:

torque converters, torque divider torque converters and variable capacity torque converters

electronically modulated transmission

countershaft transmissions, including:

gear types

gear ratios and torque reduction and multiplication

simple and compound gear trains

compound planetary transmissions, including:

gear types

gear ratios and torque reduction and multiplication

simple and compound planetary gear trains

transmission control valves and solenoids

hydraulic circuits and schematics

application, purpose and operation of powershift transmissions and components, including:

power flows in:

multiple countershaft transmissions

compound planetary transmissions

torque converters, torque divider torque converters, and variable capacity torque converters

hydraulic components and hydraulic control components, including:

oil pumps

hydraulic valves

electronic transmission pressure modulation

power train electronic control system

mechanical components, including:

clutch packs

one-way clutches

planetary gears

compound gear sets

powershift electronic control systems

transfer cases

hydraulic oils and filters

diagnostic testing procedures for powershift transmissions, including:

following safety requirements when stall testing

stall testing according to manufacturer specifications and workplace procedures

dismantling procedures for powershift transmissions, including:

measuring clearances and tolerances

inspecting components

repair procedures for powershift transmissions, including procedures for inspecting, evaluating and measuring component wear

post-repair testing procedures for powershift transmissions, including:

stall testingaccording to manufacturer specifications and workplace procedures.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the powershift transmissions that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

manufacturer powershift transmission specifications

two different vehicles or machines with powershift transmission faults

diagnostic equipment for powershift transmissions

tools, equipment and materials appropriate for repairing and adjusting powershift transmissions.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnostic options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and checked according to manufacturer procedures 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and machinery or transmission is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnostic options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures, and environmental and safety requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and checked according to manufacturer procedures 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and machinery or transmission is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURKTX001 - Diagnose and repair powershift transmissions
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURKTX001 - Diagnose and repair powershift transmissions

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: