Assessor Resource

AURMO3007A
Recover a motorsport vehicle

Assessment tool

Version 1.0
Issue Date: March 2024


This unit applies to individuals who perform vehicle recovery operations in motorsport events, including practice sessions. This can include carrying out pre-operational checks on recovery vehicles and equipment, driving a recovery vehicle carrying/towing a load, operating ancillary equipment, and completing documentation.

Persons achieving competence in this unit will need to fulfil the applicable legislation and relevant regulations covering the operation of the tow truck and related equipment.

This unit of competency describes the skills and knowledge required to recover damaged or broken-down vehicles in motorsport events in a safe and timely manner without causing further damage to the vehicle.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

observe safety procedures and requirements

communicate effectively with others involved in or affected by the work

select methods and techniques appropriate to the circumstances

complete preparatory activities in a systematic manner

complete vehicle recovery procedures safely and without damage to vehicle or equipment

complete area clean-up

complete log book and reporting requirements.

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with relevant regulatory requirements, including specified Australian standards.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

The following resources should be made available:

access to relevant recovery vehicle and equipment

access to suitable motorsport events

applicable personal protection and safety equipment and resources

copies of safe work practices and standard operating procedures.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.

Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.

Guidance information for assessment

Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Required skills include:

technical skills to the level required to operate recovery vehicle and associated tools and equipment

communication skills to the level required to understand and relay technical information and instructions, and to relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities

literacy skills to the level required to read and interpret instructions, procedures, regulations, signs, charts, maps and labels, relevant to recovery operations

numeracy skills to the level required to calculate loads, assess tolerances and apply accurate measurements

problem-solving skills to the level required to modify activities and take appropriate initiatives depending on differing recovery contexts, risk situations and environments

team skills to the level required to ensure completion of tasks in a safe and timely manner

Required knowledge

Required knowledge includes:

procedures for recovery type, preparation of vehicles, recovery procedure and worksite clean-up requirements

recovery vehicle controls, instruments and indicators and their use

recovery vehicle handling procedures, both with and without a tow or load

procedures to be followed in the event of an emergency when operating a recovery vehicle, including the use of portable fire extinguishers

pre-operational checks carried out on a recovery vehicle and its equipment and related action that should be taken

communication procedures, including reporting lines within the motorsport environment

range of potential workplace hazards, risks and emergency situations

basic principles of risk management

applicable commonwealth, state or territory legislation, regulations, standards and codes of practice, including OHS and environmental regulations, relevant to recovering vehicles in a motorsport event

organisational policies and procedures, including safety requirements, hazard identification, risk assessment and emergency response procedures, related to recovering vehicles in a motorsport event

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Motorsports

Motorsports may include:

automobile (car, truck and cart), motorcycle and powerboat events

competitions and practice sessions

circuit, track, speedway, rally, road and off-road events

club, state/territory, national and international events

Potential hazards

Potential hazards at the recovery location may include:

other vehicular traffic

live electrical wires

contaminated blood at scene

weather conditions

spilt or leaking oil or fuel (slippery surfaces)

unsafe or damaged equipment

unsafe procedures in the use of recovery equipment

fire

unsafe manual lifting procedures

sharp edges

Recovery vehicle

Recovery vehicle may include:

tow truck

tilt tray

trailer

dolly wheels

low loader

Safe work practices

Safe work practices may include:

use of flashing lights on vehicles

deployment of safety equipment (e.g. warning signs or witch's hats)

strategic positioning of recovery vehicle

use of appropriate personal protective equipment and clothing

checking equipment and isolating, rectifying or reporting any defective equipment

following correct procedures in the event of spilt or leaking fuel or oil

using correct portable firefighting equipment

use of reflective raincoats and vests

correct manual lifting strategies

Tools and equipment

Tools and equipment may include:

hand tools

chains, slings and ropes

safety equipment

towing bar

jack

shovel, broom and spill kit

remote lights, signs, torch and work light

air lines and fittings

reduction blocks

communication equipment

Communication skills

Communication skills to manage the reactions of participants to decisions may include:

addressing people politely

clarifying the relevant rule or regulation

presenting information in logical order

refraining from swearing, arguing or fighting

remaining patient

refraining from interrupting

speaking clearly

using language that is not patronising but at a suitable level

using body language and voice in an assertive but not aggressive manner

using non-discriminatory language

using effective listening and speaking skills

verifying what has been said or done and why it has been said or done

Information/documents

Sources of information/documents may include:

hardcopy and electronic media

verbal, written and graphical information

safe work procedures related to vehicle recovery and equipment operation

regulatory/legislative requirements pertaining to operating a recovery vehicle

National Competition Rules (NCR) and event supplementary regulations

motorsport organisation manuals, codes of conduct, policies and procedures

controlling body rules, category rules and supplementary regulations

event policies and procedures relating to work areas, authorities and lines of communication

task instructions, including briefings, worksheets, checklists and plans

OHS requirements

OHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

hazard and risk control

elimination of hazardous materials and substances

manual handling, including shifting, lifting and carrying

emergency procedures

Legislative requirements

Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:

relevant state/territory roads and traffic authority driving regulations and licence/permit requirements pertaining to the recovery vehicle operations

award and enterprise agreements

industrial relations

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Environmental requirements

Environmental requirements may include but are not limited to:

waste management

noise

habitat, flora and fauna protection

clean-up management

Organisational policies and procedures

Organisational policies and procedures may include:

OHS, sustainability, environment, equal opportunity and anti-discrimination policies and procedures

industry codes of practice

safe work procedures

communication, reporting and recording procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Assess the equipment requirements and techniques to carry out the recovery 
Confirm availability of recovery vehicle and associated equipment and personnel to carry out the job 
Identify potential hazards at the recovery site and during the recovery operation and take appropriate precautions and strategies to manage and control the risks involved 
Identify the type of vehicle to be towed and determine critical aspects of vehicle design that could impact recovery operations 
Plan the recovery operation with consideration for security and safety of persons, vehicles and property 
Set up and secure the recovery situation in accordance with the established action plan 
Deploy safety equipment, barriers and warning signs in accordance with operating procedures and regulatory requirements 
Manage spectators and other personnel in the vicinity of the towing situation in accordance with safety procedures and security requirements 
Manoeuvre vehicle to be recovered into position using appropriate equipment and standard operating procedures 
Prepare the vehicle for recovery without causing damage to any component or system, as far as possible 
Use personal protective equipment in accordance with standard operating procedures and occupational health and safety (OHS) requirements 
Operate recovery equipment in accordance with manufacturer specifications, safe working practices and regulatory requirements 
Identify attachment points and check the weight of the vehicle being recovered to ensure that they are consistent with established guidelines, regulatory requirements and the permissible safe working loads for the recovery vehicle and its associated equipment 
Secure the recovered vehicle using appropriate winches, ropes and cables in accordance with relevant load restraint regulations and standard operating procedures 
Safely convey and unload the recovered vehicle to the designated location 
Clear the recovery area and its near vicinity of debris and clean up any spills 
Complete recovery vehicle log in accordance with organisational requirements and regulations 
Complete incident report and official forms related to recovery operations 
Check recovery vehicle and equipment for operational effectiveness in accordance with manufacturer specifications and standard operating procedures 
Carry out routine servicing and lubrication checks of the recovery vehicle and its equipment in accordance with the maintenance and service schedule 
Identify and tag faulty equipment or components that may affect the safe operation of the vehicle and report to the appropriate personnel for rectification 

Forms

Assessment Cover Sheet

AURMO3007A - Recover a motorsport vehicle
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURMO3007A - Recover a motorsport vehicle

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: