AURPTA006 - Inspect and service line trimming systems and components
Assessor Resource
AURPTA006 Inspect and service line trimming systems and components
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to inspect and service line trimming systems and components according to manufacturer instructions. It involves preparing for the task, inspecting the system and components, reporting the inspection findings, servicing and adjusting the system and components, and completing workplace processes and documentation.
It applies to those working in the outdoor power equipment service and repair industry. The line trimming systems include brush cutters and grass trimmers which may be electric or petrol driven, stand-alone or fitted to other equipment systems.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to inspect and service line trimming system of outdoor power equipment
1.1 Job requirements are determined from workplace instructions
1.2 Manufacturer inspection and servicing procedures and information are sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect line trimming system
2.1 Line trimming system is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
2.2 Inspection results are compared with manufacturer specifications
2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
2.4 Authorisation to proceed is obtained according to workplace procedures
3. Service line trimming system
3.1 Service options are selected according to manufacturer maintenance schedule and lubrication charts
3.2 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.3 Post-service testing is carried out according to workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
inspect and service the following line trimming systems:
auto line feed system
manual line feed system
bent and straight shaft systems.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting and servicing line trimming systems and components, including procedures for:
starting and operating line trimming equipment
adjusting and aligning line trimming systems
using personal protective equipment (PPE) relevant to operating line trimmers
application, purpose and operation of line trimming systems , including:
overload protection
line sizes and types
auto and manual line feed systems
metal and composite blades
handles and harnesses
brush cutter angle drives
bent and straight shafts
protective guards and cowlings
stand-alone or fitted to other equipment systems
types and application of lubricants, and lubricating methods
inspection procedures for line trimming systems and components, including:
analysing component wear
checking bearings and housing condition
checking automatic and manual line feed systems
checking physical damage to protective guards and cowlings
service and adjustment procedures for line trimming systems and components, including:
lubricating bent and straight shaft drive systems
testing automatic and manual line feed systems
testing overload devices
post-repair testing procedures for line trimming systems and components, including operating line trimming system through full operating range.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the line trimming systems and components that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
outdoor power equipment repair workplace or simulated workplace
workplace instructions
manufacturer line trimming specifications
outdoor power equipment line trimming system and components specified in the performance evidence and requiring servicing
tools, equipment and materials appropriate for inspecting and servicing line trimming systems and components.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to inspect and service line trimming system of outdoor power equipment
1.1 Job requirements are determined from workplace instructions
1.2 Manufacturer inspection and servicing procedures and information are sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect line trimming system
2.1 Line trimming system is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
2.2 Inspection results are compared with manufacturer specifications
2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
2.4 Authorisation to proceed is obtained according to workplace procedures
3. Service line trimming system
3.1 Service options are selected according to manufacturer maintenance schedule and lubrication charts
3.2 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
3.3 Post-service testing is carried out according to workplace procedures
4. Complete work processes
4.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Inspection and servicing procedures must include:
inspecting components
making adjustments
identifying lubrication requirements
testing serviced unit.
Line trimming system must include:
auto line feed systems
manual line feed systems
brush cutters and grass trimmers
bent and straight shafts.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
starting and operating line trimming equipment
adjusting and aligning line trimming systems
using personal protective equipment (PPE) relevant to operating line trimmers.
Post-service testing must include:
operating line trimming system
comparing line trimming operation to manufacturer specifications
making system adjustments as required
re-testing system.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
inspect and service the following line trimming systems:
auto line feed system
manual line feed system
bent and straight shaft systems.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting and servicing line trimming systems and components, including procedures for:
starting and operating line trimming equipment
adjusting and aligning line trimming systems
using personal protective equipment (PPE) relevant to operating line trimmers
application, purpose and operation of line trimming systems , including:
overload protection
line sizes and types
auto and manual line feed systems
metal and composite blades
handles and harnesses
brush cutter angle drives
bent and straight shafts
protective guards and cowlings
stand-alone or fitted to other equipment systems
types and application of lubricants, and lubricating methods
inspection procedures for line trimming systems and components, including:
analysing component wear
checking bearings and housing condition
checking automatic and manual line feed systems
checking physical damage to protective guards and cowlings
service and adjustment procedures for line trimming systems and components, including:
lubricating bent and straight shaft drive systems
testing automatic and manual line feed systems
testing overload devices
post-repair testing procedures for line trimming systems and components, including operating line trimming system through full operating range.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the line trimming systems and components that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
outdoor power equipment repair workplace or simulated workplace
workplace instructions
manufacturer line trimming specifications
outdoor power equipment line trimming system and components specified in the performance evidence and requiring servicing
tools, equipment and materials appropriate for inspecting and servicing line trimming systems and components.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Manufacturer inspection and servicing procedures and information are sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Line trimming system is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
Inspection results are compared with manufacturer specifications
Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Authorisation to proceed is obtained according to workplace procedures
Service options are selected according to manufacturer maintenance schedule and lubrication charts
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-service testing is carried out according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Manufacturer inspection and servicing procedures and information are sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
Line trimming system is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
Inspection results are compared with manufacturer specifications
Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Authorisation to proceed is obtained according to workplace procedures
Service options are selected according to manufacturer maintenance schedule and lubrication charts
Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Post-service testing is carried out according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURPTA006 - Inspect and service line trimming systems and components
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURPTA006 - Inspect and service line trimming systems and components
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent