AURPTA008 - Service and repair post hole digging systems
Assessor Resource
AURPTA008 Service and repair post hole digging systems
Assessment tool
Version 1.0 Issue Date: April 2024
This unit describes the performance outcomes required to service and repair faults in the post hole digging systems of outdoor power equipment according to manufacturer specifications. It involves preparing for the task, determining the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.
It applies to those working in the outdoor power equipment service and repair industry. The post hole digging systems may be powered by electric or internal combustion engines.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to service and repair post hole digging system
1.1 Job requirements are determined from workplace instructions
1.2 Service and repair procedures and information are sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Determine service and repair requirements of post hole digging system
2.1 System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
2.2 Faults are identified from inspection and causes of faults are determined
2.3 Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
2.4 Authorisation to proceed with service and repair is obtained according to workplace procedures
3. Carry out service and repair activities
3.1 Service and repair options are analysed and those most appropriate to the circumstances are selected
3.2 Tools, equipment and materials are selected and checked
3.3 Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
3.4 Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
4. Check post hole digging system for normal operation
4.1 System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
4.2 Adjustments are made as required and post hole digging system is re-tested
5. Complete work processes
5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
5.2 Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
5.3 Tools and equipment are checked and stored according to workplace procedures
5.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
service and repair two different post hole digging systems.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to servicing and repairing post hole digging systems, including procedures for:
safely starting and checking operation, adjustment and alignment of post hole digging system
safely operating overload system
selecting and using suitable personal protective equipment (PPE)
environmental requirements, including procedures for trapping, storing and disposing of lubricating oils and greases released from post hole digging systems
application, purpose and operation of post hole digging systems, including:
electric powered
engine powered
power take-off
types of lubricants, and their application and methods of lubrication
different types of augers and their applications, including:
tungsten
steel
service and repair procedures for post hole digging systems, including:
drive system gearbox
reversing system
overload devices
protective guards and cowlings
handle assembly
lubrication systems
drilling spindle
augers
auger brake
clutch drum assembly
auger sharpening
post-repair testing procedures for post hole digging systems, including operating system through full operating range.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the post hole digging systems that they have serviced and repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
outdoor power equipment repair workplace or simulated workplace
workplace instructions
manufacturer specifications for post hole digging systems
area and equipment, including PPE, required to safely test post hole digging systems
two different post hole digging systems requiring service and repair
tools, equipment and materials appropriate for inspecting, servicing and repairing post hole digging systems.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to service and repair post hole digging system
1.1 Job requirements are determined from workplace instructions
1.2 Service and repair procedures and information are sourced and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools, equipment and materials are selected and checked for serviceability
2. Determine service and repair requirements of post hole digging system
2.1 System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
2.2 Faults are identified from inspection and causes of faults are determined
2.3 Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
2.4 Authorisation to proceed with service and repair is obtained according to workplace procedures
3. Carry out service and repair activities
3.1 Service and repair options are analysed and those most appropriate to the circumstances are selected
3.2 Tools, equipment and materials are selected and checked
3.3 Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
3.4 Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
4. Check post hole digging system for normal operation
4.1 System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
4.2 Adjustments are made as required and post hole digging system is re-tested
5. Complete work processes
5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
5.2 Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
5.3 Tools and equipment are checked and stored according to workplace procedures
5.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Service and repair procedures must include:
inspecting, repairing and replacing components
adjusting system and components
lubricating gearbox
testing repaired unit, including overload protection.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
safely starting and checking operation, adjustment and alignment of post hole digging system
safely operating overload system
selecting and using suitable personal protective equipment (PPE).
Environmental requirements must include:
procedures for trapping, storing and disposing of lubricating oils and greases released from post hole digging systems.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
service and repair two different post hole digging systems.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to servicing and repairing post hole digging systems, including procedures for:
safely starting and checking operation, adjustment and alignment of post hole digging system
safely operating overload system
selecting and using suitable personal protective equipment (PPE)
environmental requirements, including procedures for trapping, storing and disposing of lubricating oils and greases released from post hole digging systems
application, purpose and operation of post hole digging systems, including:
electric powered
engine powered
power take-off
types of lubricants, and their application and methods of lubrication
different types of augers and their applications, including:
tungsten
steel
service and repair procedures for post hole digging systems, including:
drive system gearbox
reversing system
overload devices
protective guards and cowlings
handle assembly
lubrication systems
drilling spindle
augers
auger brake
clutch drum assembly
auger sharpening
post-repair testing procedures for post hole digging systems, including operating system through full operating range.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the post hole digging systems that they have serviced and repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
outdoor power equipment repair workplace or simulated workplace
workplace instructions
manufacturer specifications for post hole digging systems
area and equipment, including PPE, required to safely test post hole digging systems
two different post hole digging systems requiring service and repair
tools, equipment and materials appropriate for inspecting, servicing and repairing post hole digging systems.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Service and repair procedures and information are sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
Faults are identified from inspection and causes of faults are determined
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
Authorisation to proceed with service and repair is obtained according to workplace procedures
Service and repair options are analysed and those most appropriate to the circumstances are selected
Tools, equipment and materials are selected and checked
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
Adjustments are made as required and post hole digging system is re-tested
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Service and repair procedures and information are sourced and interpreted
Hazards associated with the work are identified and risks are managed
Tools, equipment and materials are selected and checked for serviceability
System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
Faults are identified from inspection and causes of faults are determined
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
Authorisation to proceed with service and repair is obtained according to workplace procedures
Service and repair options are analysed and those most appropriate to the circumstances are selected
Tools, equipment and materials are selected and checked
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
Adjustments are made as required and post hole digging system is re-tested
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURPTA008 - Service and repair post hole digging systems
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURPTA008 - Service and repair post hole digging systems
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent