AURRTE007 - Diagnose and repair marine inboard engines
Assessor Resource
AURRTE007 Diagnose and repair marine inboard engines
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to diagnose and repair faults in the inboard spark ignition and compression ignition engines of marine vessels. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.
It applies to those working in the marine service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair inboard engine
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked according for serviceability
2. Diagnose engine
2.1 Diagnostic tests are performed according to workplace procedures and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings are reported according to workplace procedures, including initial recommendations for necessary repairs or adjustments
3. Dismantle engine
3.1 Tools, equipment and materials are selected and checked
3.2 Engine is dismantled as required according to workplace procedures, and safety and environmental requirements
3.3 Engine is cleaned and components arranged for inspection according to workplace procedures, and safety and environmental requirements
3.4 Engine components are measured and compared with manufacturer specifications
3.5 Final repair recommendations are made and reported according to workplace procedures
4. Repair and reassemble engine
4.1 Repair information is sourced and interpreted
4.2 Repair options are analysed and those most appropriate to the circumstances are selected
4.3 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
4.4 Engine is reassembled according to manufacturer specifications, workplace procedures and safety requirements
4.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
5. Complete work processes
5.1 Final inspection is made to ensure work is to workplace expectations and vessel or engine is presented ready for use or stored according to workplace procedures
5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
5.3 Tools and equipment are checked and stored according to workplace procedures
5.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
diagnose and repair a fault in three different marine inboard engines, including:
a fault in an engine cylinder head, in which the work must involve removing the cylinder head from the engine
a fault in two of the following components, in which the work must involve removing the components from the engine:
engine valve timing belt
engine valve timing chain
engine valve lifters
cylinder head valve stem seals
camshaft
camshaft bearings
crankshaft
balance shaft or its bearings
pistons and connecting rods
cylinder block sleeves
main bearings and big-end bearings
internal oil pump
dismantle and reassemble one marine inboard engine.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing inboard engines, including procedures for lifting and supporting inboard engines
environmental requirements, including procedures for trapping, storing and disposing of fluids released from engines
operating principles of inboard engines and associated components, including:
combustion, including:
air-fuel ratios and combustion cycles
direct injection
detonation
engine measurement and performance, including:
swept volume and engine volume
compression ratio
engine efficiency, including volumetric efficiency, thermal efficiency and mechanical efficiency
torque and horsepower, including brake horsepower
application, purpose and operation of inboard engines and components, including:
diagnostic testing procedures for inboard engines, including:
wet and dry compression tests
cylinder leakage tests
oil pressure tests
sources of water ingress
checking sources of fluid leaks
exhaust smoke diagnosis
checking abnormal engine noises
dismantling procedures for inboard engines, including procedures for:
measuring clearances and tolerances
inspecting components
repair procedures for inboard engines, including procedures for repairing cylinder blocks and cylinder heads
assembly procedures for inboard engines, including procedures for fitting components and obtaining clearances and tolerances
post-repair testing procedures for inboard engines, including:
load testing engines
water testing engines.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the marine inboard engines that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
marine repair workplace or simulated workplace
workplace instructions
manufacturer inboard engine specifications
three different marine inboard engines with the faults specified in the performance evidence
diagnostic equipment for inboard engines
tools, equipment and materials appropriate for dismantling, repairing, reassembling and adjusting marine inboard engines.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to diagnose and repair inboard engine
1.1 Job requirements are determined from workplace instructions
1.2 Diagnostic information is sourced and interpreted
1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected
1.4 Hazards associated with the work are identified and risks are managed
1.5 Diagnostic tools and equipment are selected and checked according for serviceability
2. Diagnose engine
2.1 Diagnostic tests are performed according to workplace procedures and safety requirements
2.2 Faults are identified from diagnostic test results and causes of faults are determined
2.3 Diagnosis findings are reported according to workplace procedures, including initial recommendations for necessary repairs or adjustments
3. Dismantle engine
3.1 Tools, equipment and materials are selected and checked
3.2 Engine is dismantled as required according to workplace procedures, and safety and environmental requirements
3.3 Engine is cleaned and components arranged for inspection according to workplace procedures, and safety and environmental requirements
3.4 Engine components are measured and compared with manufacturer specifications
3.5 Final repair recommendations are made and reported according to workplace procedures
4. Repair and reassemble engine
4.1 Repair information is sourced and interpreted
4.2 Repair options are analysed and those most appropriate to the circumstances are selected
4.3 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
4.4 Engine is reassembled according to manufacturer specifications, workplace procedures and safety requirements
4.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
5. Complete work processes
5.1 Final inspection is made to ensure work is to workplace expectations and vessel or engine is presented ready for use or stored according to workplace procedures
5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
5.3 Tools and equipment are checked and stored according to workplace procedures
5.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for lifting and supporting inboard engines.
Environmental requirements must include:
procedures for trapping, storing and disposing of fluids released from engines.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
diagnose and repair a fault in three different marine inboard engines, including:
a fault in an engine cylinder head, in which the work must involve removing the cylinder head from the engine
a fault in two of the following components, in which the work must involve removing the components from the engine:
engine valve timing belt
engine valve timing chain
engine valve lifters
cylinder head valve stem seals
camshaft
camshaft bearings
crankshaft
balance shaft or its bearings
pistons and connecting rods
cylinder block sleeves
main bearings and big-end bearings
internal oil pump
dismantle and reassemble one marine inboard engine.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing inboard engines, including procedures for lifting and supporting inboard engines
environmental requirements, including procedures for trapping, storing and disposing of fluids released from engines
operating principles of inboard engines and associated components, including:
combustion, including:
air-fuel ratios and combustion cycles
direct injection
detonation
engine measurement and performance, including:
swept volume and engine volume
compression ratio
engine efficiency, including volumetric efficiency, thermal efficiency and mechanical efficiency
torque and horsepower, including brake horsepower
application, purpose and operation of inboard engines and components, including:
diagnostic testing procedures for inboard engines, including:
wet and dry compression tests
cylinder leakage tests
oil pressure tests
sources of water ingress
checking sources of fluid leaks
exhaust smoke diagnosis
checking abnormal engine noises
dismantling procedures for inboard engines, including procedures for:
measuring clearances and tolerances
inspecting components
repair procedures for inboard engines, including procedures for repairing cylinder blocks and cylinder heads
assembly procedures for inboard engines, including procedures for fitting components and obtaining clearances and tolerances
post-repair testing procedures for inboard engines, including:
load testing engines
water testing engines.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the marine inboard engines that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
marine repair workplace or simulated workplace
workplace instructions
manufacturer inboard engine specifications
three different marine inboard engines with the faults specified in the performance evidence
diagnostic equipment for inboard engines
tools, equipment and materials appropriate for dismantling, repairing, reassembling and adjusting marine inboard engines.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked according for serviceability
Diagnostic tests are performed according to workplace procedures and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings are reported according to workplace procedures, including initial recommendations for necessary repairs or adjustments
Tools, equipment and materials are selected and checked
Engine is dismantled as required according to workplace procedures, and safety and environmental requirements
Engine is cleaned and components arranged for inspection according to workplace procedures, and safety and environmental requirements
Engine components are measured and compared with manufacturer specifications
Final repair recommendations are made and reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Engine is reassembled according to manufacturer specifications, workplace procedures and safety requirements
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vessel or engine is presented ready for use or stored according to workplace procedures
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Diagnostic information is sourced and interpreted
Diagnostic options are analysed and those most appropriate to the circumstances are selected
Hazards associated with the work are identified and risks are managed
Diagnostic tools and equipment are selected and checked according for serviceability
Diagnostic tests are performed according to workplace procedures and safety requirements
Faults are identified from diagnostic test results and causes of faults are determined
Diagnosis findings are reported according to workplace procedures, including initial recommendations for necessary repairs or adjustments
Tools, equipment and materials are selected and checked
Engine is dismantled as required according to workplace procedures, and safety and environmental requirements
Engine is cleaned and components arranged for inspection according to workplace procedures, and safety and environmental requirements
Engine components are measured and compared with manufacturer specifications
Final repair recommendations are made and reported according to workplace procedures
Repair information is sourced and interpreted
Repair options are analysed and those most appropriate to the circumstances are selected
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
Engine is reassembled according to manufacturer specifications, workplace procedures and safety requirements
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
Final inspection is made to ensure work is to workplace expectations and vessel or engine is presented ready for use or stored according to workplace procedures
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURRTE007 - Diagnose and repair marine inboard engines
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURRTE007 - Diagnose and repair marine inboard engines
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent