• AURT270278A - Use and maintain workplace tools and equipment

Assessor Resource

AURT270278A
Use and maintain workplace tools and equipment

Assessment tool

Version 1.0
Issue Date: March 2024


The unit includes identification and confirmation of work requirement, preparation for work, selection, use, servicing, maintenance and storage of tooling and equipment and completion of work finalisation processes, including clean-up and documentation.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

This unit covers the competence required to select, safely use and maintain workplace tooling and equipment.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

selection and safe use of hand tooling

selection and safe use of workplace equipment

basic maintenance of tooling and equipment within the scope of operator responsibility

selection and safe use of personal protective equipment

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

workplace location or simulated workplace

material relevant to the use and maintenance of workplace tooling and equipment

equipment, hand and power tooling appropriate to the use and maintenance of workplace tooling and equipment

activities covering mandatory task requirements

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures

apply analytical skills required for identification and analysis of technical information

apply plain English literacy and communication skills in relation to dealing with customers and team members

apply questioning and active listening skills for example when obtaining information from customers

apply oral communication skills sufficient to convey information and concepts to customers

apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring one's own performance

interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal

establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage

use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

use workplace technology related to the use and maintenance of workplace tooling and equipment, including the use of measuring equipment, computerised technology and communication devices and the reporting/documenting of results

Required knowledge

A working knowledge of:

OH&S regulations/requirements, equipment, material and personal safety requirements

tool and equipment selection procedures

basic maintenance procedures for tooling and equipment

tool and equipment safety and operating procedures

types, characteristics, uses and limitations of hand tooling

types, characteristics, uses and limitations of power tooling

types, characteristics, uses and limitations of workplace equipment

work organisation and planning processes

enterprise quality processes

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Tooling and equipment

Tooling and equipment may include computer hardware/ software, calculators, general office equipment, hand and power tooling, specialist tooling for removal/adjustment, storage racks, protective covers, measuring devices, plastics repair equipment, sealing equipment, adhesive equipment, heating equipment, templates, welding equipment, including oxy, arc, MIG and TIG, vehicle cleaning equipment, service workshop manuals, product manuals, hydraulic breaker tooling, line oilers, filters and gauges, alternator and starting motor bench testers, paint mixers, key cutters, multimeters, load testers, brake and drum lathes, fuel injector cleaners, ignition module test instruments

Maintenance methods

Maintenance methods may include routine maintenance to tooling and equipment as per schedules, labelling faulty tooling and equipment, minor repairs to tooling and equipment, and the chocking, jacking and supporting of machines on level and incline planes

Specific requirements

Specific requirements may include hydraulic jacks, air bags and overhead cranes for lifting heavy machines

Warehouse equipment

Warehouse equipment includes auto picker, bag palletiser, barcode printer and scanner, belt conveyors, bolt cutter, cages, carton sealer, computers, forklifts, battery chargers, pallets, picking trolleys, sprinkler system, strapping machine, fire extinguishers, first aid box, safety signs, security alarm, safety harness, carton crushers, disposal bins, seals and ties, shrink wrap

OH&S

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulations/codes of practice and workplace policies and practices

Emergency procedures

Emergency procedures related to this unit are to include, but are not limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Safe operating procedures

Safe operating procedures are to include, but are not limited to the conduct of operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Environmental requirements

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Communications

Communications are to include, but are not limited to verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to the use and maintenance of workplace tooling and equipment

regulatory/legislative requirements pertaining to the automotive industry

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Tooling and equipment are selected to meet job requirements 
Suitable tooling and equipment are selected for use within the workplace environment 
Tooling and equipment are selected according to enterprise procedures/policies 
Tooling and equipment are used in a safe manner to prevent injury to self and others 
Tooling and equipment are used in a manner that does not cause damage to other workplace equipment 
Observations are noted during the use of tooling/ equipment 
Tooling and equipment are regularly checked against manufacturer/component supplier recommendations to ensure safe operating condition 
Damaged/worn tooling and equipment are tagged and removed from the workplace for repair or replacement and reported in accordance with enterprise requirements 
Tooling/equipment are serviced, adjusted and/or maintained as per manufacturer/component supplier schedule to ensure safe and correct operation, within the scope of responsibility 
Servicing and maintenance operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies 
Tooling and equipment are cleaned, checked and stored 
Tooling and equipment are securely stored 
Documents are completed according to enterprise policies and procedures 

Forms

Assessment Cover Sheet

AURT270278A - Use and maintain workplace tools and equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURT270278A - Use and maintain workplace tools and equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: