Assessor Resource

AURT334808A
Carry out grinding and facing operations

Assessment tool

Version 1.0
Issue Date: March 2024


The unit includes identification and confirmation of work requirement, preparation for work, the completion of grinding and facing operations and completion of work finalisation processes, including clean-up and documentation.

This unit of competence applies to engine reconditioning and is to cover both grinding and facing of engine components.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.

This unit covers the competence required to carry out grinding and facing operations to a range of engine components to specific tolerances.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

machining and facing a minimum of:

one crankshaft

one camshaft

one cast iron cylinder head

one alloy cylinder head

interpreting measurements in accordance with workplace requirements

machine and facing work is done within workplace timeframes

work presentation to customer or for storage in compliance with workplace requirements

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

workplace location or simulated workplace

material relevant to carrying out grinding and facing operations

equipment, hand and power tooling appropriate to carrying out grinding and facing operations

activities covering mandatory task requirements

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures

apply analytical skills for identification and analysis of technical information

apply plain English literacy and communication skills in relation to dealing with customers and team members

apply questioning and active listening skills for example when obtaining information from customers

apply oral communication skills sufficient to convey information and concepts to customers

apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance

interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal

establish safe and effective work processes which anticipate and/or resolve problems and downtime, to systematically develop solutions to avoid or minimise reworking and avoid wastage

use mathematical ideas and techniques to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

use workplace technology related to carrying out grinding and facing operations, including the use of measuring equipment and communication devices and the documenting/recording of results

Required knowledge

A working knowledge of:

OH&S regulations/requirements, equipment, material and personal safety requirements

industry codes of practice

Australian Standards

types of measuring instruments, application and procedures

tool sharpening methods

grinding procedures

facing procedures

cleaning/lubricating agents

enterprise quality procedures

work organisation and planning processes

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Engine components

Engine components are to include camshafts, crankshafts, alloy and cast iron cylinder heads and may include flywheels and clutch components

Grinding and facing methods

Methods are to include measuring, setting up, tool sharpening and machining/ grinding operations

OH&S

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include but may not be limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental Requirements

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include hand tooling, power tooling, lifting equipment, grinding and facing machines (crankshaft, camshaft cylinder head), measuring equipment and safety equipment

Materials

Materials may include cooling, cleaning and lubricating materials

Communications

Communications are to include, but are not limited to verbal and visual instructions and fault documenting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to carrying out grinding and facing operations

regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Nature and scope of work requirements are identified and confirmed 
OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work 
Procedures and information such as workshop manuals and specifications, and tooling, are sourced 
Method options are analysed and those most appropriate to the circumstances are selected and prepared 
Technical and/or calibration requirements for grinding and facing are sourced and support equipment is identified and prepared 
Correct information is accessed and interpreted from manufacturer/component supplier specifications 
Components are measured prior to grinding to determine depth of grind 
Component is positioned in grinder and clamped 
Grinding is carried out in accordance with enterprise procedures 
Grinding operations are completed without causing damage to any component or system 
Components are checked/measured with instruments to ensure compliance with specifications 
Grinding operations are completed to specifications and documentation is completed 
Grinding operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies 
Component is measured prior to facing to determine action to be taken 
Component is positioned and clamped in face grinder 
Facing is carried out in accordance with enterprise procedures 
Facing operations are completed without causing damage to any component or system 
Correct information is accessed and interpreted from manufacturer/component supplier specifications 
Components are checked and measured with instruments to ensure compliance with specifications 
Facing operations are completed to specifications 
Facing operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies 
Work schedule documentation is completed 
Components are thoroughly cleaned in galleries and surfaces 
Bright surfaces are treated with a protective coating to prevent rust 
Final inspection is made to ensure work is to workplace expectations 
Components are cleaned and/or stored to workplace expectations 
Job card is processed in accordance with workplace procedures 

Forms

Assessment Cover Sheet

AURT334808A - Carry out grinding and facing operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURT334808A - Carry out grinding and facing operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: