Assessor Resource

AURTTJ003
Remove and replace wheel and tyre assemblies

Assessment tool

Version 1.0
Issue Date: May 2024


This unit describes the performance outcomes required to remove and replace wheel and tyre assemblies. It requires the learner to plan and prepare the task; identify wheel and tyre assemblies; remove wheel and tyre assemblies; inspect components and identify their function; replace the wheel and tyre assembly; and maintain the work area, tools and equipment.

It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.

The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace wheel and tyre assemblies

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications

2. Remove and inspect vehicle wheel and tyre assemblies

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements

2.3 Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.4 Wheel and tyre assemblies are identified and inspected according to manufacturer specifications

2.5 Wheel and tyre assembly inspection results are recorded

3. Replace wheel and tyre assemblies

3.1 Wheel and tyre assemblies are prepared for replacement

3.2 Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on vehicle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to remove and replace wheel and tyre assemblies

1.1 Safety requirements are sourced and interpreted

1.2 Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified

1.3 Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications

2. Remove and inspect vehicle wheel and tyre assemblies

2.1 Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements

2.3 Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.4 Wheel and tyre assemblies are identified and inspected according to manufacturer specifications

2.5 Wheel and tyre assembly inspection results are recorded

3. Replace wheel and tyre assemblies

3.1 Wheel and tyre assemblies are prepared for replacement

3.2 Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on vehicle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirementsmust include:

information about key aspects of work health and safety (WHS) and occupational health and safety (OHS) requirements, including:

use of personal protective equipment, including safety glasses, ear protection and safety footwear

use of hand tools and lifting and supporting equipment

application of procedures for handling wheel and tyre assemblies.

Tools and equipment must include:

automotive hand tools

vehicle lifting and supporting equipment, including wheel chocks.

Vehicles must include one or more of the following:

passenger motor vehicle

motor cycle

constructed vehicle.

Wheel and tyre assemblies must include:

one vehicle fitted with steel wheels

one vehicle fitted with alloy wheels.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Safety requirements are sourced and interpreted 
Task instruction is interpreted andvehicle wheel and tyre assemblies to be worked on are identified 
Manufacturer specifications and workplace procedures for removing and replacing wheel and tyre assembly are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for wheel and tyre assembly removal and replacement are identified according to manufacturer specifications 
Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements 
Vehicle is prepared for wheel removal according toworkplace procedures and safety requirements 
Wheel and tyre assemblies are removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment 
Wheel and tyre assemblies are identified and inspected according to manufacturer specifications 
Wheel and tyre assembly inspection results are recorded 
Wheel and tyre assemblies are prepared for replacement 
Wheel and tyre assemblies are replaced according to workplace procedures, manufacturer specifications and safety requirements without causing damage to components, tools or equipment 
Wheel and tyre assembly on vehicle is checked for correct operation 
Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle wheels and tyres are presented ready for use or storage according to workplace procedures 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures 
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURTTJ003 - Remove and replace wheel and tyre assemblies
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURTTJ003 - Remove and replace wheel and tyre assemblies

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: