Assessor Resource

AURTTK2001
Use and maintain measuring equipment in an automotive workplace

Assessment tool

Version 1.0
Issue Date: April 2024


Work applies to general automotive retail, service and repair environments of a non-specialist nature.

Equipment is used to measure length, width, squareness, flatness, angles, roundness, depth, clearances, run out, pressure, temperature or any measurement that can be taken from analogue or digital devices using imperial and metric measurement.

Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment within the scope of this unit. This includes an understanding of the level of work to be performed.

This unit should not be selected if the measuring equipment to be used is dedicated to electrical measurements, such as voltage, resistance or current flow.

This unit describes the performance outcomes required to use and maintain measuring equipment of a non-specialist nature.

The unit involves identifying and confirming work requirements, preparing for work, conducting measurements, analysing and documenting outcomes, maintaining equipment, and completing work finalisation processes, including clean-up and documentation.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

observe safety procedures

communicate effectively with others involved in or affected by the work

select approved measurement methods and techniques

measure dimensions or variables using a range of measuring equipment

accurately interpret measurements

maintain measuring equipment.

Context of, and specific resources for assessment

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

using standard workplace practices and procedures

following safety requirements

applying environmental constraints.

Assessment is to comply with relevant:

regulatory requirements

Australian standards

industry codes of practice.

The following resources should be made available:

material relevant to the use and maintenance of measuring equipment

equipment and tools appropriate to the use and maintenance of measuring equipment

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

analytical skills to identify and analyse technical information

communication skills to:

follow verbal and written instructions

communicate information relating to the correct and safe use of equipment

literacy skills to:

read and follow original equipment manufacturer (OEM) maintenance information and measuring equipment use

read and follow information on operating procedures and OEM repair guidelines

numeracy skills to read and interpret metric and non-metric systems of measurement

planning and organising skills to:

identify and minimise risk to operator and others

contribute to activities that implement and follow workplace procedures

problem-solving skills to:

recognise a workplace problem or a potential problem

refer problems outside area of responsibility to appropriate person

self-management skills to:

locate and identify appropriate measuring equipment

recognise limitations and seek timely advice

follow basic workplace documentation, such as operating procedures

technical skills to:

select measuring equipment appropriate to the task

use measuring equipment safely

maintain measuring equipment using appropriate techniques

calibrate or adjust measuring equipment

identify defects in measuring equipment and mark for repair

store measuring equipment according to manufacturer and workplace procedures

technology skills to:

use manual, electronic and digital measuring equipment

use workplace technology to assist with work practices

Required knowledge

WHS regulations, requirements, equipment and material, including personal safety requirements

common automotive measurement terminology

types of non-specialist measuring equipment and their applications

measurement procedures

measuring equipment maintenance procedures

work organisation and planning processes relating to using measuring equipment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace health and safety (WHS) requirements:

are those prescribed under legislation, regulations, codes of practice, and workplace policies and procedures

may include:

protective clothing and equipment

use of tools and equipment

handling of material

use of fire-fighting equipment

first aid equipment

hazard control, including control of hazardous materials and toxic substances.

Workplace procedures may include:

conducting operational risk assessments and treatments associated with vehicle movement

site-specific instructions

safe work procedures relating to the use and maintenance of measuring equipment

workplace policies and practices

instructions issued by authorised workplace or external persons

written and graphical instructions

signage

work schedules, plans and specifications

work bulletins or memos

diagrams or sketches

vehicle workshop manuals and information.

Measuring equipment may include:

internal and external micrometres

Vernier calipers

dial gauges

depth gauges

steel rulers

tape measures

squares

straight edges

dividers

protractors

feeler gauges

thermometers

pressure gauges.

Maintenance methods may include:

routine maintenance to tools and equipment as per schedules

calibrating or adjusting measuring equipment

minor repairs to tools and equipment

documenting or tagging equipment as faulty or out-of-service.

Workplace documents may include:

fault or defect reporting documents

out-of-service reports

job or organisation work specifications and requirements.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Nature and scope of work requirements are identified and confirmed 
Workplace health and safety (WHS) requirements and appropriate precautions are identified and applied 
Procedures and instructions, including workshop manuals and specifications, are sourced and used to determine job requirements 
Measuring methods appropriate to the circumstances are selected and prepared according to workplace procedures 
Measuring equipment is sourced and prepared 
Warnings relating to working with precision tools and equipment are observed 
Measurement is conducted according to workplace procedures and equipment manufacturer specifications 
Measurement results are compared with manufacturer specifications to indicate compliance or non-compliance 
Measurements are documented and recommendations made 
Reports are processed according to workplace procedures 
Information required for equipment maintenance is accessed from manufacturer specifications and interpreted 
Measuring equipment is checked against manufacturer recommendations and recommended maintenance methods are confirmed to ensure safe and accurate operating condition 
Measuring equipment is maintained and stored according to manufacturer specifications 
Equipment checks are completed without causing damage to component or system 
Workplace documents are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AURTTK2001 - Use and maintain measuring equipment in an automotive workplace
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURTTK2001 - Use and maintain measuring equipment in an automotive workplace

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: