|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
Fundamental custom graphic techniques | Fundamental custom graphic techniques include pictorial reproduction, highlighting, reflective, and transparency techniques, texture simulation, metal, stone, and liquid simulations, highlighting techniques, leather simulation, chrome simulation, marbling and the use of tinted clears. |
Refinishing materials | Refinishing materials may include acrylic enamel, acrylic lacquer, waterborne paints, acrylic enamel hardeners and reducers. |
Refinishing methods | Refinishing methods include spray gun selection equipment protection methods, various spraying techniques, drying procedures, paint mixing, compound polishing and detailing of surfaces. |
OH&S | OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances. |
Personal protective equipment | Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and practices. |
Safe operating procedures | Safe operating procedures are to include, but are not limited to operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and worksite visitors. |
Emergency procedures | Emergency procedures related to this unit are to include, but are not limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and worksite evacuation. |
Environmental requirements | Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management. |
Quality requirements | Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures. |
Statutory/regulatory authorities | Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice. |
Tooling and equipment | Tooling and equipment may include various air brushes, spray guns, air pressure regulators, air compressors, spray booths, baking ovens, heating and lighting systems, strainers, measuring sticks, specialised custom painting tools/equipment and safety equipment. |
Materials | Materials may include templates, stencils, masking medium, tac rags, water-based and solvent-based paints, polishing buffs and pads, cleaning solvents, compounds, glazes and cleaning materials. |
Communications | Communications are to include, but are not limited to verbal and visual instructions and fault reporting and may include worksite specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers. |
Information/documents | Sources of information/documents may include: verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches safe work procedures related to application of colour and clear coat refinishing materials regulatory/legislative requirements pertaining to automotive painting and finishing engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian Standards. |