This unit describes the performance outcomes required to carry out basic repairs to vehicle plastic components. It involves planning and preparing for the task, identifying types of automotive plastic components, selecting and using tools and equipment, welding plastic components, and maintaining the work area, tools and equipment.
It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to repair plastic component
1.1 Task instructions are interpreted and plastic component to be worked on is identified
1.2 Manufacturer specifications and workplace procedures for repairing component are sourced and interpreted
1.3 Safety and environmental requirements are sourced and interpreted
1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
1.5 Tools and equipment required for repairing component are identified and checked for serviceability
2. Repair plastic component
2.1 Suitable plastic welding techniques and adhesives are selected and used to repair component according to workplace requirements and procedures, and safety and environmental requirements
2.2 Body filler is selected and applied to the component according to workplace requirements, and safety and environmental requirements
2.3 Repairs are completed to pre-paint condition according to workplace requirements and procedures, and safety and environmental requirements
2.4 Repaired component is inspected according to workplace requirements
2.5 Component inspection results are recorded
3. Complete work processes
3.1 Final inspection is made to ensure work meets task instructions and workplace standards, and component is presented ready for painting, further processes, or storage according to workplace procedures
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
3.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
repair two different vehicle plastic components, in which the work must involve:
one plastic welding repair
one plastic filling repair.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to repairing vehicle plastic components, including procedures for:
selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear
using hand tools
environmental requirements, including procedures for trapping, storing and disposing of waste produced during repair processes
types and construction of vehicle plastic components
plastic component repair procedures, including:
plastic welding
types and application of body fillers
types and application of adhesives
repair finish standard.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the plastic components that they have repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
PPE for repairing vehicle plastic components
two different vehicle plastic components requiring repair
tools, equipment and materials appropriate for repairing vehicle plastic components.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to repair plastic component
1.1 Task instructions are interpreted and plastic component to be worked on is identified
1.2 Manufacturer specifications and workplace procedures for repairing component are sourced and interpreted
1.3 Safety and environmental requirements are sourced and interpreted
1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
1.5 Tools and equipment required for repairing component are identified and checked for serviceability
2. Repair plastic component
2.1 Suitable plastic welding techniques and adhesives are selected and used to repair component according to workplace requirements and procedures, and safety and environmental requirements
2.2 Body filler is selected and applied to the component according to workplace requirements, and safety and environmental requirements
2.3 Repairs are completed to pre-paint condition according to workplace requirements and procedures, and safety and environmental requirements
2.4 Repaired component is inspected according to workplace requirements
2.5 Component inspection results are recorded
3. Complete work processes
3.1 Final inspection is made to ensure work meets task instructions and workplace standards, and component is presented ready for painting, further processes, or storage according to workplace procedures
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
3.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear
using hand tools
environmental requirements, including procedures for trapping, storing and disposing of waste produced during repair processes.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
repair two different vehicle plastic components, in which the work must involve:
one plastic welding repair
one plastic filling repair.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to repairing vehicle plastic components, including procedures for:
selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear
using hand tools
environmental requirements, including procedures for trapping, storing and disposing of waste produced during repair processes
types and construction of vehicle plastic components
plastic component repair procedures, including:
plastic welding
types and application of body fillers
types and application of adhesives
repair finish standard.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the plastic components that they have repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
PPE for repairing vehicle plastic components
two different vehicle plastic components requiring repair
tools, equipment and materials appropriate for repairing vehicle plastic components.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Task instructions are interpreted and plastic component to be worked on is identified
Manufacturer specifications and workplace procedures for repairing component are sourced and interpreted
Safety and environmental requirements are sourced and interpreted
Potential hazards and risks associated with task are identified and reported to workplace supervisor
Tools and equipment required for repairing component are identified and checked for serviceability
Suitable plastic welding techniques and adhesives are selected and used to repair component according to workplace requirements and procedures, and safety and environmental requirements
Body filler is selected and applied to the component according to workplace requirements, and safety and environmental requirements
Repairs are completed to pre-paint condition according to workplace requirements and procedures, and safety and environmental requirements
Repaired component is inspected according to workplace requirements
Component inspection results are recorded
Final inspection is made to ensure work meets task instructions and workplace standards, and component is presented ready for painting, further processes, or storage according to workplace procedures
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
Workplace documentation is processed according to workplace procedures
Task instructions are interpreted and plastic component to be worked on is identified
Manufacturer specifications and workplace procedures for repairing component are sourced and interpreted
Safety and environmental requirements are sourced and interpreted
Potential hazards and risks associated with task are identified and reported to workplace supervisor
Tools and equipment required for repairing component are identified and checked for serviceability
Suitable plastic welding techniques and adhesives are selected and used to repair component according to workplace requirements and procedures, and safety and environmental requirements
Body filler is selected and applied to the component according to workplace requirements, and safety and environmental requirements
Repairs are completed to pre-paint condition according to workplace requirements and procedures, and safety and environmental requirements
Repaired component is inspected according to workplace requirements
Component inspection results are recorded
Final inspection is made to ensure work meets task instructions and workplace standards, and component is presented ready for painting, further processes, or storage according to workplace procedures
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTN040 - Repair vehicle plastic components
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTN040 - Repair vehicle plastic components
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent