AURVTP005 - Apply rust prevention and sound deadening materials to vehicle body components
Assessor Resource
AURVTP005 Apply rust prevention and sound deadening materials to vehicle body components
Assessment tool
Version 1.0 Issue Date: July 2024
This unit describes the performance outcomes required to apply rust prevention and sound deadening materials to vehicle body components. It involves preparing for the task, selecting and using specialist application tools and equipment, selecting and applying materials according to manufacturer specifications and safety data instructions, and completing workplace processes and documentation.
It applies to those working in the automotive paint refinishing repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to apply rust prevention and sound deadening materials
1.1 Job requirements are determined from workplace instructions
1.2 Application information is accessed and interpreted
1.3 Materials are calculated, selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Work is planned to identify rust prevention methods, minimise waste, and avoid damage to vehicle
2. Prepare surfaces
2.1 Surfaces are cleaned according to workplace procedures and safety and environmental requirements
2.2 Surfaces are prepared for material application process without causing damage to components or systems
3. Apply materials
3.1 Vehicle components requiring the application of rust prevention and sound deadening materials are identified and prepared
3.2 Materials are applied according to manufacturer specifications and recommended application methods
3.3 Special treatments or materials are dried using approved methods and equipment
4. Complete work processes
4.1 Final inspection is made to ensure work meets workplace expectations and vehicle components are presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
apply five of the following rust prevention and sound deadening materials to different vehicle body components:
fish oil
wax compounds
spray-on sound deadening
brush-on sound deadening
adhesive bonded sound deadening pads
joint and seam sealants.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying rust prevention and sound deadening materials to vehicle body components, including procedures for:
selecting and using personal protective equipment (PPE)
using technical data sheets (TDS) for sound deadening materials
using safety data sheets (SDS) for fish oil, sealers and adhesives
handling and storing rust prevention and sound deadening materials
using tools and equipment
environmental requirements, including procedures for trapping, storing and disposing of waste materials
sound deadening material manufacturer specifications
types and uses of rust prevention and sound deadening materials
rust prevention and sound deadening application methods and techniques
types and uses of rust prevention and sound deadening equipment, including:
spray gun
heat gun
brush applicators
procedures for protecting vehicle and components when applying rust protection and sound deadening materials
procedures for final inspection of fitted sound deadening and rust prevention materials.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of task.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the rust prevention and sound deadening materials they have applied to vehicle body components, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
TDS for sound deadening materials
SDS for fish oil, sealers and adhesives
PPE to apply rust prevention and sound deadening materials
rust prevention and sound deadening materials
vehicle body components requiring the application of rust prevention and sound deadening materials specified in the performance evidence
tools, equipment and materials appropriate for applying rust prevention and sound deadening materials to vehicle body components.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to apply rust prevention and sound deadening materials
1.1 Job requirements are determined from workplace instructions
1.2 Application information is accessed and interpreted
1.3 Materials are calculated, selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Work is planned to identify rust prevention methods, minimise waste, and avoid damage to vehicle
2. Prepare surfaces
2.1 Surfaces are cleaned according to workplace procedures and safety and environmental requirements
2.2 Surfaces are prepared for material application process without causing damage to components or systems
3. Apply materials
3.1 Vehicle components requiring the application of rust prevention and sound deadening materials are identified and prepared
3.2 Materials are applied according to manufacturer specifications and recommended application methods
3.3 Special treatments or materials are dried using approved methods and equipment
4. Complete work processes
4.1 Final inspection is made to ensure work meets workplace expectations and vehicle components are presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Application information mustinclude:
workplace procedures
manufacturer specifications
technical data sheets (TDS)
safety data sheets (SDS).
Types of materials must include:
fish oil
wax compounds
joint and seam sealants
sheet, spray-on and brush-on sound deadening
mechanically fastened and adhesive bonded sound deadening pads.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE
using TDS for sound deadening materials
using SDS for fish oil, sealers and adhesives
handling and storing rust prevention and sound deadening materials
using tools and equipment
environmental requirements, including procedures for trapping, storing and disposing of waste materials.
Application methods must include:
hand brushing
mixing
spraying
mechanical fastening.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
apply five of the following rust prevention and sound deadening materials to different vehicle body components:
fish oil
wax compounds
spray-on sound deadening
brush-on sound deadening
adhesive bonded sound deadening pads
joint and seam sealants.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying rust prevention and sound deadening materials to vehicle body components, including procedures for:
selecting and using personal protective equipment (PPE)
using technical data sheets (TDS) for sound deadening materials
using safety data sheets (SDS) for fish oil, sealers and adhesives
handling and storing rust prevention and sound deadening materials
using tools and equipment
environmental requirements, including procedures for trapping, storing and disposing of waste materials
sound deadening material manufacturer specifications
types and uses of rust prevention and sound deadening materials
rust prevention and sound deadening application methods and techniques
types and uses of rust prevention and sound deadening equipment, including:
spray gun
heat gun
brush applicators
procedures for protecting vehicle and components when applying rust protection and sound deadening materials
procedures for final inspection of fitted sound deadening and rust prevention materials.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of task.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the rust prevention and sound deadening materials they have applied to vehicle body components, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
TDS for sound deadening materials
SDS for fish oil, sealers and adhesives
PPE to apply rust prevention and sound deadening materials
rust prevention and sound deadening materials
vehicle body components requiring the application of rust prevention and sound deadening materials specified in the performance evidence
tools, equipment and materials appropriate for applying rust prevention and sound deadening materials to vehicle body components.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Application information is accessed and interpreted
Materials are calculated, selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work is planned to identify rust prevention methods, minimise waste, and avoid damage to vehicle
Surfaces are cleaned according to workplace procedures and safety and environmental requirements
Surfaces are prepared for material application process without causing damage to components or systems
Vehicle components requiring the application of rust prevention and sound deadening materials are identified and prepared
Materials are applied according to manufacturer specifications and recommended application methods
Special treatments or materials are dried using approved methods and equipment
Final inspection is made to ensure work meets workplace expectations and vehicle components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Application information is accessed and interpreted
Materials are calculated, selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work is planned to identify rust prevention methods, minimise waste, and avoid damage to vehicle
Surfaces are cleaned according to workplace procedures and safety and environmental requirements
Surfaces are prepared for material application process without causing damage to components or systems
Vehicle components requiring the application of rust prevention and sound deadening materials are identified and prepared
Materials are applied according to manufacturer specifications and recommended application methods
Special treatments or materials are dried using approved methods and equipment
Final inspection is made to ensure work meets workplace expectations and vehicle components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTP005 - Apply rust prevention and sound deadening materials to vehicle body components
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTP005 - Apply rust prevention and sound deadening materials to vehicle body components
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent