Assessor Resource

AURVTP029
Prepare surface and prime repaired body panels

Assessment tool

Version 1.0
Issue Date: May 2024


This unit describes the performance outcomes required to prepare and prime a repaired body panel of a vehicle. It requires the learner to plan and prepare the task; identify types of automotive abrasives; remove protective waxes and surface contaminants; feather paint edges; apply filler; and maintain the work area, tools and equipment.

It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.

The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1.1 Prepare to prime a repaired body panel

1.1 Safety and environmental requirements are sourced and interpreted

1.2 Task instruction is interpreted and vehicle body panel to be worked on is identified

1.3 Manufacturer specifications and workplace procedures for removing paint and preparing surface are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for priming body panel are identified according to manufacturer specifications

2. Prepare body panel for priming

2.1 Tools, equipment and materials for priming body panel are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle body panel is prepared for priming according toworkplace procedures and safety and environmental requirements, and without causing damage to components, tools or equipment

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Apply primer to body panel

3.1 Primer is prepared for application according to manufacturer specifications and safety and environmental requirements

3.2 Primer is applied according to workplace procedures, manufacturer specifications, and safety and environmental requirements

3.3 Primer is applied to body panel without causing damage to body panel, components, tools or equipment

3.4 Body panel is inspected to ensure correct application of primer to body panel

3.5 Body panel inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and body panels are primed ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1.1 Prepare to prime a repaired body panel

1.1 Safety and environmental requirements are sourced and interpreted

1.2 Task instruction is interpreted and vehicle body panel to be worked on is identified

1.3 Manufacturer specifications and workplace procedures for removing paint and preparing surface are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for priming body panel are identified according to manufacturer specifications

2. Prepare body panel for priming

2.1 Tools, equipment and materials for priming body panel are selected and checked prior to use according to manufacturer specifications and safety requirements

2.2 Vehicle body panel is prepared for priming according toworkplace procedures and safety and environmental requirements, and without causing damage to components, tools or equipment

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Apply primer to body panel

3.1 Primer is prepared for application according to manufacturer specifications and safety and environmental requirements

3.2 Primer is applied according to workplace procedures, manufacturer specifications, and safety and environmental requirements

3.3 Primer is applied to body panel without causing damage to body panel, components, tools or equipment

3.4 Body panel is inspected to ensure correct application of primer to body panel

3.5 Body panel inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instruction and workplace standards, and body panels are primed ready for use or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirementsmust include:

information about key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including:

use of personal protective equipment, including safety glasses, ear protection and safety footwear

use of hand tools

procedures for handling and disposing of used primer, emulsions and solvents

procedures for extracting fumes.

Tools, equipment and materials must include:

preparation and spray areas with fume extraction

spray gun equipment

wet and dry paper

spray gun equipment

sanding discs

emulsion materials

filler

primers, including:

etch primer

primer surfacer.

Vehicle body panel must include:

a major body panel from one of the following:

passenger vehicle

light commercial vehicle

heavy vehicle

constructed vehicle.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Tools, equipment and materials for priming body panel are selected and checked prior to use according to manufacturer specifications and safety requirements 
Vehicle body panel is prepared for priming according toworkplace procedures and safety and environmental requirements, and without causing damage to components, tools or equipment 
Body panel is inspected according to manufacturer specifications 
Body panel inspection results are recorded 
Primer is prepared for application according to manufacturer specifications and safety and environmental requirements 
Primer is applied according to workplace procedures, manufacturer specifications, and safety and environmental requirements 
Primer is applied to body panel without causing damage to body panel, components, tools or equipment 
Body panel is inspected to ensure correct application of primer to body panel 
Body panel inspection results are recorded 
Final inspection is made to ensure work meets task instruction and workplace standards, and body panels are primed ready for use or storage according to workplace procedures 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures 
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary 
Workplace documentation is processed according to workplace procedures 
Safety and environmental requirements are sourced and interpreted 
Task instruction is interpreted and vehicle body panel to be worked on is identified 
Manufacturer specifications and workplace procedures for removing paint and preparing surface are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for priming body panel are identified according to manufacturer specifications 

Forms

Assessment Cover Sheet

AURVTP029 - Prepare surface and prime repaired body panels
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTP029 - Prepare surface and prime repaired body panels

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: