AURVTS004 - Repair vehicle composite material components
Assessor Resource
AURVTS004 Repair vehicle composite material components
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to repair components on vehicle bodies using composite materials. It involves preparing for the task, selecting and using specialist tools and equipment, identifying suitable composite materials, calculating material quantities, mixing and applying recommended composite materials to repair components according to workplace and customer specifications, and completing workplace processes and documentation.
It applies to those working in the automotive service and body repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to repair vehicle composite material component
1.1 Workplace instructions are used to determine job requirements
1.2 Fibreglass and composite material repair information is accessed and interpreted from workplace procedures and manufacturer specifications
1.3 Composite materials are identified, selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
1.6 Composite tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
1.7 Work area is prepared and work is planned to identify methods for repairing a vehicle using composite materials and to minimise waste
2. Carry out repair activities
2.1 Items to be repaired are located and damage or faults are assessed to determine repair methods
2.2 Tools and equipment are set up and materials are mixed and prepared for use
2.3 Repairs to composite material components are carried out according to workplace procedures and safety and environmental requirements
2.4 Reinforcement techniques are applied to reinstate pre-damage strength to composite materials
2.5 Finishing techniques are applied to present composite surfaces to manufacturer and workplace quality standards
2.6 Repairs to composite material components are completed without causing damage to equipment and components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
repair composite components of two different vehicles, including a repair to:
50 mm diameter hole
100 mm split.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS), and occupational health and safety (OHS) requirements relating to repairing vehicle composite material components, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment
satisfying ventilation requirements for work area
using safety data sheets (SDS) for composite materials
handling and storing hazardous resins and chemicals
environmental requirements, including procedures for trapping, storing and disposing of resins, chemicals and waste materials produced during fabrication process
fibreglass and composite material repair procedures and techniques, including:
types and application of specialist composite tools and equipment
types and features of fibreglass and composite materials
use of composite moulds required for support backing during repair
measuring and calculation techniques
surface preparation for composite repairs
mixing and applying composite materials according to manufacturer specifications
finishing techniques for composite surfaces
reinforcement methods to reinstate pre-damage strength
composite repair problems and resolution techniques
procedures for final inspection of repaired composite component.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle components made of composite materials that they have repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
PPE required to repair composite components
SDS for composite materials
composite materials
two different vehicles requiring the composite component repairs specified in the performance evidence
tools, equipment and materials appropriate for repairing vehicle composite material components.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to repair vehicle composite material component
1.1 Workplace instructions are used to determine job requirements
1.2 Fibreglass and composite material repair information is accessed and interpreted from workplace procedures and manufacturer specifications
1.3 Composite materials are identified, selected and inspected for quality
1.4 Hazards associated with the work are identified and risks are managed
1.5 Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
1.6 Composite tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
1.7 Work area is prepared and work is planned to identify methods for repairing a vehicle using composite materials and to minimise waste
2. Carry out repair activities
2.1 Items to be repaired are located and damage or faults are assessed to determine repair methods
2.2 Tools and equipment are set up and materials are mixed and prepared for use
2.3 Repairs to composite material components are carried out according to workplace procedures and safety and environmental requirements
2.4 Reinforcement techniques are applied to reinstate pre-damage strength to composite materials
2.5 Finishing techniques are applied to present composite surfaces to manufacturer and workplace quality standards
2.6 Repairs to composite material components are completed without causing damage to equipment and components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Composite materials mustinclude:
composite materials, including:
fibreglass matting
gel coats
release agents
resins
catalysts
cleaning materials.
Composite tools and equipment must include:
composite material measuring equipment
specialist hand tools.
Safety and environmental requirements must include:
work health and safety (WHS), and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment
satisfying ventilation requirements for work area
using safety data sheets (SDS) for composite materials
handling and storing hazardous resins and chemicals
environmental requirements, including procedures for trapping, storing and disposing of resins, chemicals and waste materials produced during fabrication process.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
repair composite components of two different vehicles, including a repair to:
50 mm diameter hole
100 mm split.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS), and occupational health and safety (OHS) requirements relating to repairing vehicle composite material components, including procedures for:
selecting and using personal protective equipment (PPE)
using tools and equipment
satisfying ventilation requirements for work area
using safety data sheets (SDS) for composite materials
handling and storing hazardous resins and chemicals
environmental requirements, including procedures for trapping, storing and disposing of resins, chemicals and waste materials produced during fabrication process
fibreglass and composite material repair procedures and techniques, including:
types and application of specialist composite tools and equipment
types and features of fibreglass and composite materials
use of composite moulds required for support backing during repair
measuring and calculation techniques
surface preparation for composite repairs
mixing and applying composite materials according to manufacturer specifications
finishing techniques for composite surfaces
reinforcement methods to reinstate pre-damage strength
composite repair problems and resolution techniques
procedures for final inspection of repaired composite component.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle components made of composite materials that they have repaired, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
PPE required to repair composite components
SDS for composite materials
composite materials
two different vehicles requiring the composite component repairs specified in the performance evidence
tools, equipment and materials appropriate for repairing vehicle composite material components.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Workplace instructions are used to determine job requirements
Fibreglass and composite material repair information is accessed and interpreted from workplace procedures and manufacturer specifications
Composite materials are identified, selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
Composite tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
Work area is prepared and work is planned to identify methods for repairing a vehicle using composite materials and to minimise waste
Items to be repaired are located and damage or faults are assessed to determine repair methods
Tools and equipment are set up and materials are mixed and prepared for use
Repairs to composite material components are carried out according to workplace procedures and safety and environmental requirements
Reinforcement techniques are applied to reinstate pre-damage strength to composite materials
Finishing techniques are applied to present composite surfaces to manufacturer and workplace quality standards
Repairs to composite material components are completed without causing damage to equipment and components
Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Workplace instructions are used to determine job requirements
Fibreglass and composite material repair information is accessed and interpreted from workplace procedures and manufacturer specifications
Composite materials are identified, selected and inspected for quality
Hazards associated with the work are identified and risks are managed
Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
Composite tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
Work area is prepared and work is planned to identify methods for repairing a vehicle using composite materials and to minimise waste
Items to be repaired are located and damage or faults are assessed to determine repair methods
Tools and equipment are set up and materials are mixed and prepared for use
Repairs to composite material components are carried out according to workplace procedures and safety and environmental requirements
Reinforcement techniques are applied to reinstate pre-damage strength to composite materials
Finishing techniques are applied to present composite surfaces to manufacturer and workplace quality standards
Repairs to composite material components are completed without causing damage to equipment and components
Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTS004 - Repair vehicle composite material components
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTS004 - Repair vehicle composite material components
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent