AURVTT003 - Remove and replace automotive and marine interior trim components
Assessor Resource
AURVTT003 Remove and replace automotive and marine interior trim components
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to safely remove and replace interior trim in an automotive or marine application. It involves preparing for the task, selecting and using tools and equipment, removing and replacing interior components, conducting a final inspection of work, and completing workplace processes and documentation.
It applies to those working in the automotive and marine trimming industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and replace interior trim component
1.1 Job requirements are determined from workplace instructions
1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
1.3 Interior trim component to be removed and replaced is identified and inspected for damage
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Work is planned to minimise waste and use time efficiently
2. Remove, store and replace trim
2.1 Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
2.2 Trim component is safely stored in preparation for replacement
2.3 Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, store and replace trim components for three different vehicles or vessels, in which the work must involve:
door trims
carpets
head lining.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing automotive and marine interior trim components, including procedures for:
selecting and using personal protective equipment (PPE)
using specialist tools and equipment
manual handling components
environmental requirements, including procedures for storing and disposing of waste materials
original equipment manufacturer (OEM) specifications for removing and replacing automotive or marine interior trim components
types and uses of specialist tools and equipment needed to remove and replace interior trim components
trim component removal and replacement techniques and procedures, including procedures for protecting vehicle or vessel and components
procedures for final inspection of automotive or marine interior trim components.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicles or vessels in which they removed and replaced interior trim, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive or marine trimming workplace or simulated workplace
workplace instructions
PPE required to remove and replace vehicle or vessel interior trim components
OEM specifications and manuals
three different vehicles or vessels requiring the removal and replacement of interior trim components specified in the performance evidence
tools, equipment and materials appropriate for removing and replacing automotive and marine interior trim.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to remove and replace interior trim component
1.1 Job requirements are determined from workplace instructions
1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
1.3 Interior trim component to be removed and replaced is identified and inspected for damage
1.4 Hazards associated with the work are identified and risks are managed
1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.6 Work is planned to minimise waste and use time efficiently
2. Remove, store and replace trim
2.1 Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
2.2 Trim component is safely stored in preparation for replacement
2.3 Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE
using specialist tools and equipment
manual handling components
environmental requirements, including procedures for storing and disposing of waste materials.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove, store and replace trim components for three different vehicles or vessels, in which the work must involve:
door trims
carpets
head lining.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing automotive and marine interior trim components, including procedures for:
selecting and using personal protective equipment (PPE)
using specialist tools and equipment
manual handling components
environmental requirements, including procedures for storing and disposing of waste materials
original equipment manufacturer (OEM) specifications for removing and replacing automotive or marine interior trim components
types and uses of specialist tools and equipment needed to remove and replace interior trim components
trim component removal and replacement techniques and procedures, including procedures for protecting vehicle or vessel and components
procedures for final inspection of automotive or marine interior trim components.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicles or vessels in which they removed and replaced interior trim, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive or marine trimming workplace or simulated workplace
workplace instructions
PPE required to remove and replace vehicle or vessel interior trim components
OEM specifications and manuals
three different vehicles or vessels requiring the removal and replacement of interior trim components specified in the performance evidence
tools, equipment and materials appropriate for removing and replacing automotive and marine interior trim.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
Interior trim component to be removed and replaced is identified and inspected for damage
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work is planned to minimise waste and use time efficiently
Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Trim component is safely stored in preparation for replacement
Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
Interior trim component to be removed and replaced is identified and inspected for damage
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work is planned to minimise waste and use time efficiently
Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Trim component is safely stored in preparation for replacement
Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTT003 - Remove and replace automotive and marine interior trim components
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTT003 - Remove and replace automotive and marine interior trim components
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent