AURVTT007 - Clean plastic trim and fittings of vehicles
Assessor Resource
AURVTT007 Clean plastic trim and fittings of vehicles
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to clean a vehicle’s plastic trim and fittings. It involves preparing for the task, selecting and using cleaning equipment and material, cleaning the trim and fittings, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to clean plastic trim and fittings
1.1 Job requirements are determined from workplace instructions
1.2 Cleaning materials are selected according to vehicle and product manufacturer recommendations and workplace procedures
1.3 Hazards associated with the work are identified and risks are managed
1.4 Cleaning equipment, including personal protective equipment (PPE), is selected and checked for serviceability
1.5 Work is planned to identify manual or machine methods for cleaning plastic trim and fittings, minimise waste, and use time efficiently
2. Carry out cleaning activities
2.1 Cleaning materials are prepared and applied according to workplace procedures, safety data sheet (SDS) information, and safety and environmental requirements
2.2 Plastic trim and fittings are cleaned according to workplace instructions and customer requirements, and without causing damage to vehicle or components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
clean the internal and external plastic trim and fittings of three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to cleaning plastic trim and fittings of vehicles, including procedures for:
selecting and using personal protective equipment (PPE)
using safety data sheets (SDS) for cleaning products
using cleaning equipment
handling and storing cleaning products
environmental requirements, including procedures for trapping, storing and disposing of waste materials
types of vehicle plastic trim and fittings
cleaning products required for different trims and fittings
types and use of cleaning equipment
procedures for final inspection of cleaned vehicle trim and fittings.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle trim and fittings that they have cleaned, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive detailing workplace or simulated workplace
workplace instructions
PPE required to clean plastic trim and fittings
SDS for cleaning products
cleaning materials
three different vehicles with plastic trim and fittings requiring cleaning
cleaning tools, equipment and materials appropriate for cleaning vehicle plastic trim and fittings.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare to clean plastic trim and fittings
1.1 Job requirements are determined from workplace instructions
1.2 Cleaning materials are selected according to vehicle and product manufacturer recommendations and workplace procedures
1.3 Hazards associated with the work are identified and risks are managed
1.4 Cleaning equipment, including personal protective equipment (PPE), is selected and checked for serviceability
1.5 Work is planned to identify manual or machine methods for cleaning plastic trim and fittings, minimise waste, and use time efficiently
2. Carry out cleaning activities
2.1 Cleaning materials are prepared and applied according to workplace procedures, safety data sheet (SDS) information, and safety and environmental requirements
2.2 Plastic trim and fittings are cleaned according to workplace instructions and customer requirements, and without causing damage to vehicle or components
3. Complete work processes
3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
3.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Materials must include:
cloths
brushes
cleaning products.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE
using SDS for cleaning products
using cleaning equipment
handling and storing cleaning products
environmental requirements, including procedures for trapping, storing and disposing of waste materials.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
clean the internal and external plastic trim and fittings of three different vehicles.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to cleaning plastic trim and fittings of vehicles, including procedures for:
selecting and using personal protective equipment (PPE)
using safety data sheets (SDS) for cleaning products
using cleaning equipment
handling and storing cleaning products
environmental requirements, including procedures for trapping, storing and disposing of waste materials
types of vehicle plastic trim and fittings
cleaning products required for different trims and fittings
types and use of cleaning equipment
procedures for final inspection of cleaned vehicle trim and fittings.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle trim and fittings that they have cleaned, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive detailing workplace or simulated workplace
workplace instructions
PPE required to clean plastic trim and fittings
SDS for cleaning products
cleaning materials
three different vehicles with plastic trim and fittings requiring cleaning
cleaning tools, equipment and materials appropriate for cleaning vehicle plastic trim and fittings.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Cleaning materials are selected according to vehicle and product manufacturer recommendations and workplace procedures
Hazards associated with the work are identified and risks are managed
Cleaning equipment, including personal protective equipment (PPE), is selected and checked for serviceability
Work is planned to identify manual or machine methods for cleaning plastic trim and fittings, minimise waste, and use time efficiently
Cleaning materials are prepared and applied according to workplace procedures, safety data sheet (SDS) information, and safety and environmental requirements
Plastic trim and fittings are cleaned according to workplace instructions and customer requirements, and without causing damage to vehicle or components
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Cleaning materials are selected according to vehicle and product manufacturer recommendations and workplace procedures
Hazards associated with the work are identified and risks are managed
Cleaning equipment, including personal protective equipment (PPE), is selected and checked for serviceability
Work is planned to identify manual or machine methods for cleaning plastic trim and fittings, minimise waste, and use time efficiently
Cleaning materials are prepared and applied according to workplace procedures, safety data sheet (SDS) information, and safety and environmental requirements
Plastic trim and fittings are cleaned according to workplace instructions and customer requirements, and without causing damage to vehicle or components
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTT007 - Clean plastic trim and fittings of vehicles
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTT007 - Clean plastic trim and fittings of vehicles
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent