AURVTT021 - Select and apply adhesives in automotive and marine service and repair work
Assessor Resource
AURVTT021 Select and apply adhesives in automotive and marine service and repair work
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to select and use adhesives with a range of automotive and marine surfaces. It involves preparing for the task, selecting and using tools and equipment, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The adhesives include those used with automotive, marine, motorcycle, aircraft or recreational vehicle materials.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for work
1.1 Job requirements are determined from workplace instructions
1.2 Adhesive information is accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Select adhesive
2.1 Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
2.2 Specific safety data sheet (SDS) information for selected adhesive is identified and followed
3. Apply adhesive to prepared surfaces
3.1 Surfaces are cleaned and prepared according to adhesive manufacturer specifications
3.2 Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
4. Complete work processes
4.1 Final adhesive selection is made and presented for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
select and apply adhesives to three different automotive or marine components, in which the work must involve one door trim.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and applying adhesives in automotive and marine service and repair work, including procedures for:
selecting and using PPE
using safety data sheets (SDS) for adhesives
using specialist tools and equipment
storing adhesives
environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials
adhesive manufacturer specifications
adhesive types required for different automotive and marine materials
adhesive application techniques and procedures, including:
surface preparation
application
cleaning and disposal
procedures for protecting vehicle, vessel and components when applying adhesives
procedures for final inspection of applied adhesive.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the adhesives they have selected and used on vehicles, vessels and components, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive or marine trimming workplace or simulated workplace
workplace instructions
instructions relating to the selection and use of adhesives
SDS for adhesives
adhesives
PPE required to use adhesives
three different automotive or marine components as specified in the performance evidence requiring the use of adhesives
tools, equipment and materials appropriate for applying adhesives.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Prepare for work
1.1 Job requirements are determined from workplace instructions
1.2 Adhesive information is accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Select adhesive
2.1 Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
2.2 Specific safety data sheet (SDS) information for selected adhesive is identified and followed
3. Apply adhesive to prepared surfaces
3.1 Surfaces are cleaned and prepared according to adhesive manufacturer specifications
3.2 Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
4. Complete work processes
4.1 Final adhesive selection is made and presented for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
4.3 Tools and equipment are checked and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Adhesive information must include:
adhesive-specific specifications
adhesive-specific application and removal instructions and processes
SDS information
manufacturer specifications.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE
using SDS for adhesives
using specialist tools and equipment
storing adhesives
environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
select and apply adhesives to three different automotive or marine components, in which the work must involve one door trim.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and applying adhesives in automotive and marine service and repair work, including procedures for:
selecting and using PPE
using safety data sheets (SDS) for adhesives
using specialist tools and equipment
storing adhesives
environmental requirements, including procedures for trapping, storing and disposing of adhesives and waste materials
adhesive manufacturer specifications
adhesive types required for different automotive and marine materials
adhesive application techniques and procedures, including:
surface preparation
application
cleaning and disposal
procedures for protecting vehicle, vessel and components when applying adhesives
procedures for final inspection of applied adhesive.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the adhesives they have selected and used on vehicles, vessels and components, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive or marine trimming workplace or simulated workplace
workplace instructions
instructions relating to the selection and use of adhesives
SDS for adhesives
adhesives
PPE required to use adhesives
three different automotive or marine components as specified in the performance evidence requiring the use of adhesives
tools, equipment and materials appropriate for applying adhesives.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Adhesive information is accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work area is prepared and work is planned to minimise waste and use time efficiently
Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
Specific safety data sheet (SDS) information for selected adhesive is identified and followed
Surfaces are cleaned and prepared according to adhesive manufacturer specifications
Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
Final adhesive selection is made and presented for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Adhesive information is accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
Work area is prepared and work is planned to minimise waste and use time efficiently
Appropriate adhesive for specific automotive materials is selected according to manufacturer specifications and workplace procedures
Specific safety data sheet (SDS) information for selected adhesive is identified and followed
Surfaces are cleaned and prepared according to adhesive manufacturer specifications
Adhesives are applied according to workplace procedures and safety and environmental requirements, and without causing damage to system or components
Final adhesive selection is made and presented for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
Tools and equipment are checked and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTT021 - Select and apply adhesives in automotive and marine service and repair work
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTT021 - Select and apply adhesives in automotive and marine service and repair work
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent