AURVTW003 - Carry out advanced gas metal arc welding on vehicle body sections
Assessor Resource
AURVTW003 Carry out advanced gas metal arc welding on vehicle body sections
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes the performance outcomes required to carry out advanced gas metal arc welding (GMAW) to replace structural and non-structural vehicle body sections during vehicle body repair work. It involves preparing for the task, selecting and using GMAW equipment, setting gas flow pressures and welder settings, operating gas metal arc welder, selecting and using suitable personal protective equipment (PPE), inspecting and testing weld quality, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Plan and prepare to carry out advanced GMAW
1.1 Job requirements are determined from workplace instructions
1.2 Welding information is accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and equipment are selected and checked for serviceability
1.5 Work area is prepared and work is planned to carry out GMAW, minimise waste, and use time efficiently
2. Weld using GMAW welder
2.1 GMAW equipment is prepared, set up and adjusted for specific welding job requirement according to manufacturer procedures and safety and environmental requirements
2.2 Weld test runs are conducted according to workplace instructions and weld specifications
2.3 Materials are welded using standard or inverter GMAW process to industry and original equipment manufacturer (OEM) or authorised agency standards
3. Check welds
3.1 Welds are cleaned using appropriate tools and techniques and according to workplace instructions
3.2 Weld specifications and quality requirements are checked and confirmed by visual inspection and destructive testing
3.3 Weld defects are identified are prepared for re-welding as required, and appropriate personnel are notified
4. Complete work processes
4.1 Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
use gas metal arc welding (GMAW) equipment to carry out the following welds:
three butt welds to 0.8 mm and 1.2 mm panel steel in the following positions:
down hand
vertical
horizontal
two lap welds to 0.8 mm and 1.2 mm panel steel in the following positions:
vertical
horizontal
three plug welds to 0.8 mm and 1.2 mm panel steel in the following positions:
down hand
vertical
horizontal
two butt welds on dissimilar material thickness 0.8 mm to 1.2 mm panel steel in the following positions:
down hand
horizontal.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS), and occupational health and safety (OHS) requirements relating to carrying out advanced GMAW on vehicle body sections, including procedures for:
selecting and using personal protective equipment (PPE) when working with GMAW equipment, including approved welding helmet
using specialist welding tools and equipment
using protective screens and fume extraction system
manually handling vehicle components and GMAW equipment
identifying and controlling hazards
environmental requirements, including procedures for trapping, storing and disposing of waste materials
GMAW equipment manufacturer operating procedures
original equipment manufacturer (OEM) or authorised agency welding standards
material and consumable preparation techniques, including characteristics of different metal types, including high strength steels (HSS)
procedures for setting up and operating GMAW equipment
methods and techniques for advanced GMAW, including:
GMAW silicone bronze process
weld speed
weld angle
weld distance
welding positions
welding of dissimilar metal thicknesses
distortion control techniques
GMAW testing, including:
non-destructive inspection
destructive testing
identification and rectification of weld defects, including:
porosity
lack of penetration
excessive weld build-up
excess heat
undercut
weld distortion
heat affected zone
procedures for safeguarding vehicle electronics during GMAW
post-weld inspection procedures.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the GMAW that they have carried out, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
GMAW equipment operating instructions
PPE required for GMAW
body sections specified in the performance evidence requiring GMAW
protective screens and fume extraction system
standard or inverter GMAW equipment
tools, equipment, consumables and materials appropriate for carrying out advanced GMAW.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Plan and prepare to carry out advanced GMAW
1.1 Job requirements are determined from workplace instructions
1.2 Welding information is accessed and interpreted
1.3 Hazards associated with the work are identified and risks are managed
1.4 Tools and equipment are selected and checked for serviceability
1.5 Work area is prepared and work is planned to carry out GMAW, minimise waste, and use time efficiently
2. Weld using GMAW welder
2.1 GMAW equipment is prepared, set up and adjusted for specific welding job requirement according to manufacturer procedures and safety and environmental requirements
2.2 Weld test runs are conducted according to workplace instructions and weld specifications
2.3 Materials are welded using standard or inverter GMAW process to industry and original equipment manufacturer (OEM) or authorised agency standards
3. Check welds
3.1 Welds are cleaned using appropriate tools and techniques and according to workplace instructions
3.2 Weld specifications and quality requirements are checked and confirmed by visual inspection and destructive testing
3.3 Weld defects are identified are prepared for re-welding as required, and appropriate personnel are notified
4. Complete work processes
4.1 Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
4.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Welding information must include:
GMAW equipment operating procedures
national standards and codes of practice for welding
OEM or authorised agency standards
workplace procedures.
Tools and equipment must include:
PPE
GMAW standard or inverter welders
GMAW consumables and materials
approved welding helmets
welding protective screens and fume extraction system.
Safety and environmental requirements must include:
work health and safety (WHS), and occupational health and safety (OHS) requirements, including procedures for:
selecting and using PPE when working with GMAW equipment, including approved welding helmet
using specialist welding tools and equipment
using protective screens and fume extraction system
manually handling vehicle components and GMAW equipment
identifying and controlling hazards
environmental requirements, including procedures for trapping, storing and disposing of waste materials.
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
use gas metal arc welding (GMAW) equipment to carry out the following welds:
three butt welds to 0.8 mm and 1.2 mm panel steel in the following positions:
down hand
vertical
horizontal
two lap welds to 0.8 mm and 1.2 mm panel steel in the following positions:
vertical
horizontal
three plug welds to 0.8 mm and 1.2 mm panel steel in the following positions:
down hand
vertical
horizontal
two butt welds on dissimilar material thickness 0.8 mm to 1.2 mm panel steel in the following positions:
down hand
horizontal.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS), and occupational health and safety (OHS) requirements relating to carrying out advanced GMAW on vehicle body sections, including procedures for:
selecting and using personal protective equipment (PPE) when working with GMAW equipment, including approved welding helmet
using specialist welding tools and equipment
using protective screens and fume extraction system
manually handling vehicle components and GMAW equipment
identifying and controlling hazards
environmental requirements, including procedures for trapping, storing and disposing of waste materials
GMAW equipment manufacturer operating procedures
original equipment manufacturer (OEM) or authorised agency welding standards
material and consumable preparation techniques, including characteristics of different metal types, including high strength steels (HSS)
procedures for setting up and operating GMAW equipment
methods and techniques for advanced GMAW, including:
GMAW silicone bronze process
weld speed
weld angle
weld distance
welding positions
welding of dissimilar metal thicknesses
distortion control techniques
GMAW testing, including:
non-destructive inspection
destructive testing
identification and rectification of weld defects, including:
porosity
lack of penetration
excessive weld build-up
excess heat
undercut
weld distortion
heat affected zone
procedures for safeguarding vehicle electronics during GMAW
post-weld inspection procedures.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the GMAW that they have carried out, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
GMAW equipment operating instructions
PPE required for GMAW
body sections specified in the performance evidence requiring GMAW
protective screens and fume extraction system
standard or inverter GMAW equipment
tools, equipment, consumables and materials appropriate for carrying out advanced GMAW.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from workplace instructions
Welding information is accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and equipment are selected and checked for serviceability
Work area is prepared and work is planned to carry out GMAW, minimise waste, and use time efficiently
GMAW equipment is prepared, set up and adjusted for specific welding job requirement according to manufacturer procedures and safety and environmental requirements
Weld test runs are conducted according to workplace instructions and weld specifications
Materials are welded using standard or inverter GMAW process to industry and original equipment manufacturer (OEM) or authorised agency standards
Welds are cleaned using appropriate tools and techniques and according to workplace instructions
Weld specifications and quality requirements are checked and confirmed by visual inspection and destructive testing
Weld defects are identified are prepared for re-welding as required, and appropriate personnel are notified
Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from workplace instructions
Welding information is accessed and interpreted
Hazards associated with the work are identified and risks are managed
Tools and equipment are selected and checked for serviceability
Work area is prepared and work is planned to carry out GMAW, minimise waste, and use time efficiently
GMAW equipment is prepared, set up and adjusted for specific welding job requirement according to manufacturer procedures and safety and environmental requirements
Weld test runs are conducted according to workplace instructions and weld specifications
Materials are welded using standard or inverter GMAW process to industry and original equipment manufacturer (OEM) or authorised agency standards
Welds are cleaned using appropriate tools and techniques and according to workplace instructions
Weld specifications and quality requirements are checked and confirmed by visual inspection and destructive testing
Weld defects are identified are prepared for re-welding as required, and appropriate personnel are notified
Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURVTW003 - Carry out advanced gas metal arc welding on vehicle body sections
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURVTW003 - Carry out advanced gas metal arc welding on vehicle body sections
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent