ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare charts and flight plan

1.1

Suitable maps, aeronautical charts and weather briefings for intended operation are selected and flight plan is prepared

1.2

Pre-operations information and Notice to Airmen (NOTAM) is accessed, analysed and applied to flight plan

1.3

Hazards are clearly indicated on charts and risk controls are implemented

1.4

Effects of wind velocity, adverse environmental conditions and contingency actions are planned for

2

Comply with airspace procedures

2.1

Air traffic clearances are accessed and compliance with air traffic regulations is maintained

2.2

Airspace procedures and protocols are followed

2.3

Entrance into controlled airspace is undertaken by direction of controlling authorities

3

Conduct departure procedures

3.1

Remote pilot station is organised and essential information is accessed

3.2

Departure administration tasks and communications are conducted

3.3

Orientation to ground level is maintained

3.4

Control of RPAS is given precedence over conducting navigation and communication tasks

3.5

Situational awareness and lookout is maintained using a systematic scan technique

3.6

Local and published noise abatement requirements and curfews are observed

3.7

Separation with other air traffic is maintained

4

Maintain RPAS in operational area

4.1

Planned route is followed

4.2

Communication tasks are completed

4.3

RPAS endurance is monitored and energy reserve needs are revised

4.4

Pre-descent or navigation turning point checks are executed

4.5

Air traffic separation is maintained at all times

4.6

RPAS is controlled

4.7

Deteriorating visual meteorological conditions are recognised and appropriate RPAS corrective actions are taken

4.8

Situational awareness and lookout is undertaken using a systematic scan technique

5

Navigate RPAS within visual line of sight

5.1

Visual line of sight of RPAS is maintained at all times

5.2

Awareness of current and forecast weather conditions is maintained

5.3

Systematic scan technique is implemented at all times

5.4

Hazards and threats are identified and appropriately controlled

5.5

Effects of wind velocity, adverse environmental conditions and contingency actions are responded to as required

5.6

Situational awareness is maintained at all times

6

Apply lost link procedure

6.1

Lost link profile and routing is prepared and validated

6.2

Fail-safe mechanism is reviewed and activated as required

7

Apply lost radio communication procedure

7.1

Lost radio communications procedure and profile are prepared and validated

7.2

Back-up radio or alternate communication means are confirmed as required

8

Execute arrival procedures

8.1

Arrivals procedures are executed

8.2

Lookout is maintained using a systematic scan technique

8.3

Situational awareness is maintained at all times

8.4

Local and published noise abatement requirements and curfews are observed

8.5

Separation with air traffic is maintained

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying aviation risk management processes to remote pilot aircraft systems operations

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant aviation legislation and workplace procedures

applying relevant remote pilot aircraft systems aeronautical knowledge

identifying and correctly using relevant equipment

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

maintaining compliance with regulatory requirements

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring RPAS endurance

monitoring work activities in terms of planned schedule

operating radio communications equipment to required protocol

performing navigational functions within the parameters of applicable regulations, orders and operations manual procedures

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

sourcing and interpreting aviation weather forecast products and services as appropriate

utilising aviation safety management systems during RPAS operations

working collaboratively with others when navigating remote pilot aircraft (RPA)

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

aeronautical decision-making processes

air navigation techniques applicable to RPAS operations

characteristics of different visual chart types

chart reading techniques

controlled airspace requirements

effective communication

error management, including error types, causes and consequences

factors affecting RPAS endurance

human performance and its limitations, including the senses, memory and situational awareness as relevant to RPAS operations

identification and navigational tolerances of control area (CTA), control zone (CTR), prohibited, restricted and danger (PRD) areas

limitations of RPAS navigation systems

potential impacts of specific weather phenomena on RPAS operations

principles of operation of RPAS navigation systems

relevant sections of Civil Aviation Safety Regulations (CASRs) and Civil Aviation Orders applicable to RPAS operations

relevant WHS/OHS and environmental procedures and regulations

risk management processes applicable to RPAS operations

stress, workload and time pressure management.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare charts and flight plan

1.1

Suitable maps, aeronautical charts and weather briefings for intended operation are selected and flight plan is prepared

1.2

Pre-operations information and Notice to Airmen (NOTAM) is accessed, analysed and applied to flight plan

1.3

Hazards are clearly indicated on charts and risk controls are implemented

1.4

Effects of wind velocity, adverse environmental conditions and contingency actions are planned for

2

Comply with airspace procedures

2.1

Air traffic clearances are accessed and compliance with air traffic regulations is maintained

2.2

Airspace procedures and protocols are followed

2.3

Entrance into controlled airspace is undertaken by direction of controlling authorities

3

Conduct departure procedures

3.1

Remote pilot station is organised and essential information is accessed

3.2

Departure administration tasks and communications are conducted

3.3

Orientation to ground level is maintained

3.4

Control of RPAS is given precedence over conducting navigation and communication tasks

3.5

Situational awareness and lookout is maintained using a systematic scan technique

3.6

Local and published noise abatement requirements and curfews are observed

3.7

Separation with other air traffic is maintained

4

Maintain RPAS in operational area

4.1

Planned route is followed

4.2

Communication tasks are completed

4.3

RPAS endurance is monitored and energy reserve needs are revised

4.4

Pre-descent or navigation turning point checks are executed

4.5

Air traffic separation is maintained at all times

4.6

RPAS is controlled

4.7

Deteriorating visual meteorological conditions are recognised and appropriate RPAS corrective actions are taken

4.8

Situational awareness and lookout is undertaken using a systematic scan technique

5

Navigate RPAS within visual line of sight

5.1

Visual line of sight of RPAS is maintained at all times

5.2

Awareness of current and forecast weather conditions is maintained

5.3

Systematic scan technique is implemented at all times

5.4

Hazards and threats are identified and appropriately controlled

5.5

Effects of wind velocity, adverse environmental conditions and contingency actions are responded to as required

5.6

Situational awareness is maintained at all times

6

Apply lost link procedure

6.1

Lost link profile and routing is prepared and validated

6.2

Fail-safe mechanism is reviewed and activated as required

7

Apply lost radio communication procedure

7.1

Lost radio communications procedure and profile are prepared and validated

7.2

Back-up radio or alternate communication means are confirmed as required

8

Execute arrival procedures

8.1

Arrivals procedures are executed

8.2

Lookout is maintained using a systematic scan technique

8.3

Situational awareness is maintained at all times

8.4

Local and published noise abatement requirements and curfews are observed

8.5

Separation with air traffic is maintained

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Navigation of RPAS tasks must include one or more of the following:

visual line of sight (VLOS)

visual meteorological conditions

extended line of sight (E-LOS)

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying aviation risk management processes to remote pilot aircraft systems operations

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant aviation legislation and workplace procedures

applying relevant remote pilot aircraft systems aeronautical knowledge

identifying and correctly using relevant equipment

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

maintaining compliance with regulatory requirements

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring RPAS endurance

monitoring work activities in terms of planned schedule

operating radio communications equipment to required protocol

performing navigational functions within the parameters of applicable regulations, orders and operations manual procedures

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

sourcing and interpreting aviation weather forecast products and services as appropriate

utilising aviation safety management systems during RPAS operations

working collaboratively with others when navigating remote pilot aircraft (RPA)

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

aeronautical decision-making processes

air navigation techniques applicable to RPAS operations

characteristics of different visual chart types

chart reading techniques

controlled airspace requirements

effective communication

error management, including error types, causes and consequences

factors affecting RPAS endurance

human performance and its limitations, including the senses, memory and situational awareness as relevant to RPAS operations

identification and navigational tolerances of control area (CTA), control zone (CTR), prohibited, restricted and danger (PRD) areas

limitations of RPAS navigation systems

potential impacts of specific weather phenomena on RPAS operations

principles of operation of RPAS navigation systems

relevant sections of Civil Aviation Safety Regulations (CASRs) and Civil Aviation Orders applicable to RPAS operations

relevant WHS/OHS and environmental procedures and regulations

risk management processes applicable to RPAS operations

stress, workload and time pressure management.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.