ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select, operate and monitor navigation aids/systems

1.1

Navigation aids and systems appropriate for planned NVFR flight are selected and operated

1.2

Ground-based and satellite-based navigational systems confidence and integrity checks are conducted, continuously monitored and maintained

2

Navigate aircraft at night

2.1

External aircraft, cockpit and instrument lighting are configured and adjusted to allow reference to documentation, instruments and lookout

2.2

Aircraft position fix is determined visually or with reference to navigation aid and systems using ground-based and/or satellite-based navigational systems

2.3

Tracks are intercepted to and from stations and waypoints visually or with reference to navigation aids and systems using ground-based and satellite-based navigational systems

2.4

Track is maintained within tolerances specified in published procedures

2.5

Timings and fuel usage rates are assessed, revised and recorded in navigation log

2.6

Situational awareness is maintained using a recognised navigation work cycle

2.7

Station passage is recognised

2.8

Global navigation satellite system (GNSS)/distance measuring equipment (DME) arc procedure is performed within tolerances specified in published procedures

2.9

Planned route above lowest safe altitude (LSALT) is maintained

2.10

Route and destination weather conditions are monitored and appropriate actions are executed

2.11

Descent point calculations are completed

3

Conduct a diversion to revised route or alternate aerodrome at night

3.1

Requirement for an unplanned diversion is recognised and confirmed

3.2

Route to alternate aerodrome, navigation aid and /or revised track is determined

3.3

Planned route height above LSALT is maintained

3.4

Flight planned route is diverted to track to alternate aerodrome or navigation aid

3.5

Operational information for alternate aerodrome/s is reviewed and applied in accordance with regulations and published procedures

3.6

Fuel plan is reviewed and amended in accordance with regulations and published procedures

4

Make visual departure at night

4.1

Obstacle clearance is maintained visually at all times during departure until reaching LSALT

4.2

Departure track is intercepted within 5 nautical miles (nm) of aerodrome

4.3

Take-off and departures are conducted from aerodromes remote from ground lighting using instruments as the primary reference and ensuring after take-off checks are performed at a safe height

5

Make visual approach at night

5.1

Descent below LSALT is conducted in accordance with published procedures

5.2

Track is maintained to destination aerodrome

6

Comply with ATC rules and procedures for NVFR flights

6.1

Separation from other air traffic under NVFR is maintained

6.2

Airspace requirements are complied with

6.3

Two-way communication is maintained with air traffic services and other aircraft

6.4

ATC clearances and/or radar vectoring instructions are complied with

7

Manage hazardous weather conditions

7.1

Hazardous weather conditions are identified and risk management processes are applied to maintain safety of flight

7.2

Hazardous weather avoidance procedures are applied

7.3

Aircraft systems are employed to mitigate the effects of hazardous weather

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying air safety practices and regulations

applying altimetry procedures to all stages of a night visual flight

applying operational requirements that apply to planning a flight on the basis of conducting an area navigation (RNAV) global navigation satellite system (GNSS) procedure at the destination

applying relevant aeronautical knowledge

applying relevant legislation and workplace procedures

calculating heading to steer to intercept a new or original track to or from a non-directional beacon (NDB)

calculating heading to steer to intercept desired inbound track before reaching an NDB

calculating LSALT for a night visual flight for a route published on a chart

calculating LSALT when uncertain of position

calculating relative bearing that will indicate a desired track to or from an NDB has been intercepted, given the intercept heading

calculating the heading to steer to intercept a new or original track to or from a Very High Frequency (VHF) Omni Directional Radio Range (VOR)

calculating track to and from an NDB, given heading and relative bearings

communicating effectively with others

completing relevant documentation

determining NDB station passage, abeam NDB station, NDB bearing the aircraft is on, track error and/or drift experienced, from an automatic direction finder (ADF) relative bearing indications

determining off-track distance experienced from VOR and distance measuring equipment (DME) cockpit indications

determining route for night visual flight with respect to:

forecast weather

controlled airspace including prohibited, restricted and danger (PRD) areas

specified route limitations

airways operational requirements

availability of published routes

en route alternate aerodromes

navigation aids

rated coverage

radio communication

determining scalloping, VOR station passage, abeam VOR station, VOR radial the aircraft is on, track error and/or drift experienced, from VOR cockpit indications

determining flight calculations:

time made good (TMG)

ground speed (GS)

estimated time of arrival (ETA)

time and distance to waypoint (WPT)

wind velocity (WV) in flight

determining whether a flight may proceed based on route, aircraft equipment and NVFR navigation requirements

identifying and correctly using equipment required when navigating an aircraft under NVFR

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting DME or GPS arrival information

interpreting typical GPS navigational displays latitude/longitude, distance and bearing to waypoint, course deviation indications (CDI)

implementing aviation risk management processes to minimise, control or eliminate hazards that may exist while navigating an aircraft under NVFR

maintaining compliance with regulatory requirements

maintaining interception and maintenance of GNSS defined tracks

managing abnormal operations and emergency procedures in control area (CTA), control zone (CTR), or Class G airspace and at non-controlled aerodromes

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

performing DME procedures:

fixing position, given cockpit instrument indications utilising two VHF omni directional radio range (VOR) stations

fixing position, given instrument indications utilising combinations of VOR, non-directional beacon (NDB) and DME

fixing position, given relative bearing indications utilising two NDB stations

performing NDB approaches:

calculating heading to steer to intercept a new or original track to or from an NDB

calculating heading to steer to intercept desired inbound track before reaching an NDB

calculating relative bearing that will indicate desired track to or from an NDB has been intercepted, given the intercept heading

calculating track to and from an NDB, given heading and relative bearings

determining NDB station passage, abeam NDB station, NDB bearing the aircraft is on, tracking error and/or drift experienced, from ADF relative bearing indications

fixing position, given relative bearing indications utilising two NDB stations

performing GNSS procedures:

interpreting DME or GNSS arrival information

interpreting typical GNSS navigational displays including latitude/longitude, distance and bearing to waypoint, CDI

performing VHF omni directional radio range (VOR) approaches:

calculating the heading to steer to intercept a new or original track to or from a VOR

determining off-track distance experienced from VOR and DME cockpit indications

determining scalloping, VOR station passage, abeam VOR station, VOR radial the aircraft is on, tracking error and/or drift experienced, from VOR cockpit indications

fixing position, given cockpit instrument indications utilising two VOR stations

fixing position, given instrument indications utilising combinations of VOR, NDB and DME

performing NVFR navigational functions within the parameters of authorised regulations, orders and operations manual procedures

predicting availability of approach receiver autonomous integrity monitoring (RAIM) at destination or alternate aerodrome and limitations that apply to the prediction

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

recognising and taking appropriate action for GNSS warnings and messages

recognising significant variances from forecast meteorological conditions and taking appropriate actions, including issuing an air report (AIREP)

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

selecting and using required personal protective clothing and equipment conforming to industry and WHS/OHS standards

sourcing and interpreting aviation weather forecast products and services appropriate to flight planning and navigation procedures

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

abnormal operations and emergency procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

aerodrome landing area (ALA) or helicopter landing site (HLS) dimension and lighting requirements for fixed or rotary wing NVFR operations

aerodrome operations where surrounding light is limited

airways clearance requirements for entering, operating in and departing CTA and CTR, including what details to provide to air traffic control (ATC), and what details to expect from ATC

airways clearance requirements for operating in all classes of airspace, including lead time required for flight plan submission, contents, clearance void time, and read back requirement

alternate aerodrome planning requirements

altimetry procedures to all stages of a night visual flight

ATC procedures relevant to NVFR operations

ATC requirements for a change of level in CTA, including in an emergency

compulsory reporting points for route selected

controlled area protection

departure, climb, transition to cruise (levelling out), cruise, change of levels, descent and visual approach procedures at night, in CTA, CTR, Class G airspace and at non-controlled aerodromes

dimensions of the significant safety sector when calculating lowest safe altitude (LSALT) for a route not published on a chart

distance measuring equipment (DME):

DME or GNSS arrival information

DME or GNSS arrival procedures and limitations in all classes of airspace

pilot responsibilities when DME or GNSS arrival is conducted outside controlled airspace

conditions permitting descent below LSALT

procedure for joining circuit using a DME or GNSS arrival

principles of operation of DME or GNSS radio equipment

procedures for handling loss of radio communication during a DME or GNSS arrival

explanation of conditions for descent below LSALT

GNSS:

principles of operation, performance limitations and errors of a GNSS system

methods of position fixing using a GNSS system

GNSS operating procedures for typical navigational tasks using a specific type of aircraft equipment

GNSS operating procedures that provide safeguards against navigational errors and loss of situational awareness

indications of waypoint passage

GNSS operational and serviceability checks

human factor limitations associated with using GNSS equipment

requirements applicable to pilots and equipment for GNSS operations

parameters applicable to tracking tolerances, automatic waypoint sequencing, CDI sensitivity and RAIM availability

mode of operation required during each segment of a GNSS/NPA, conditions required to transition to and operate in that mode, and associated CDI sensitivity and RAIM protection provided

parameters applicable to RAIM warnings in en route, terminal and approach modes

effect of availability or otherwise of baro-aiding on RAIM availability and prediction

effect of satellite unserviceability on reliability of each type of prediction

effect of each type of RAIM prediction operational requirements

operational requirements that apply to planning a flight on the basis of conducting a RNAV (GNSS) procedure at the destination

factors that may adversely affect the conduct of a GNSS/NPA and explain suitable pilot procedures to minimise such effects

operating procedures for GNSS equipment that reduce or eliminate errors due to any of these factors

human factors and physiological limitations for conducting NVFR operations

loss of radio communication procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

maximum permissible time interval in between ATC transmissions during radar vectoring

methods of establishing and calculating LSALT:

from published charts

for route not published

position uncertainty

minimum NVFR aircraft equipment requirements

navigation requirements for a night visual flight using radio, self-contained or long-range navigation systems

navigation requirements for a night visual flight using visual reference to ground and water

navigation requirements for night visual flight with respect to time interval between fixes, accuracy of time reference, and accuracy and procedures in track-keeping

navigation route requirements for NVFR:

forecast weather

controlled airspace (CTA)

prohibited, restricted and danger areas (PRD)

engine out performance for multi-engine aircraft

specified route limitations

airways operational requirements

availability of published routes

en route

alternate aerodromes

navigation aids

rated coverage

radio communication

navigation tolerance for a night visual flight avoiding CTA

NDB:

effects of coastal refraction, night error, thunderstorms, mountainous areas, types of terrain and altitude of aircraft on NDB indications or range

methods of selecting and using the most appropriate NDB for tracking during navigation

NDB position fixing, tracking techniques, procedures and limitations

operation of VHF aerodrome lighting pilot activated lighting (PAL)

pre-flight altimeter accuracy check for a night visual flight

principles of operations, limitations and errors for NVFR radio navigation systems

privileges and limitations of NVFR rating

procedures of night visual flight in all classes of airspace when diverting from track due to navigation or weather

radar emergency procedures, including loss of radio communication, radar failure, transponder emergency codes, and aircraft emergencies

radar services that are provided by ATC

radar vectoring procedures, including radio procedures and phraseologies

radio procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

requirements and procedure for a diversion to an alternate aerodrome

requirements for departure and descent for clearance from terrain

requirements for positive radio fixing and the most precise track guidance

separation provisions between NVFR flights, and IFR and VFR flights in the various classes of CTA

separation provisions between NVFR flights, and IFR and VFR flights in GAAP CTR

VHF omni directional radio range (VOR):

VOR instrument settings required to provide command indications when flying on given tracks both to and from the VOR

VOR tracking techniques, procedures and limitations.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select, operate and monitor navigation aids/systems

1.1

Navigation aids and systems appropriate for planned NVFR flight are selected and operated

1.2

Ground-based and satellite-based navigational systems confidence and integrity checks are conducted, continuously monitored and maintained

2

Navigate aircraft at night

2.1

External aircraft, cockpit and instrument lighting are configured and adjusted to allow reference to documentation, instruments and lookout

2.2

Aircraft position fix is determined visually or with reference to navigation aid and systems using ground-based and/or satellite-based navigational systems

2.3

Tracks are intercepted to and from stations and waypoints visually or with reference to navigation aids and systems using ground-based and satellite-based navigational systems

2.4

Track is maintained within tolerances specified in published procedures

2.5

Timings and fuel usage rates are assessed, revised and recorded in navigation log

2.6

Situational awareness is maintained using a recognised navigation work cycle

2.7

Station passage is recognised

2.8

Global navigation satellite system (GNSS)/distance measuring equipment (DME) arc procedure is performed within tolerances specified in published procedures

2.9

Planned route above lowest safe altitude (LSALT) is maintained

2.10

Route and destination weather conditions are monitored and appropriate actions are executed

2.11

Descent point calculations are completed

3

Conduct a diversion to revised route or alternate aerodrome at night

3.1

Requirement for an unplanned diversion is recognised and confirmed

3.2

Route to alternate aerodrome, navigation aid and /or revised track is determined

3.3

Planned route height above LSALT is maintained

3.4

Flight planned route is diverted to track to alternate aerodrome or navigation aid

3.5

Operational information for alternate aerodrome/s is reviewed and applied in accordance with regulations and published procedures

3.6

Fuel plan is reviewed and amended in accordance with regulations and published procedures

4

Make visual departure at night

4.1

Obstacle clearance is maintained visually at all times during departure until reaching LSALT

4.2

Departure track is intercepted within 5 nautical miles (nm) of aerodrome

4.3

Take-off and departures are conducted from aerodromes remote from ground lighting using instruments as the primary reference and ensuring after take-off checks are performed at a safe height

5

Make visual approach at night

5.1

Descent below LSALT is conducted in accordance with published procedures

5.2

Track is maintained to destination aerodrome

6

Comply with ATC rules and procedures for NVFR flights

6.1

Separation from other air traffic under NVFR is maintained

6.2

Airspace requirements are complied with

6.3

Two-way communication is maintained with air traffic services and other aircraft

6.4

ATC clearances and/or radar vectoring instructions are complied with

7

Manage hazardous weather conditions

7.1

Hazardous weather conditions are identified and risk management processes are applied to maintain safety of flight

7.2

Hazardous weather avoidance procedures are applied

7.3

Aircraft systems are employed to mitigate the effects of hazardous weather

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying air safety practices and regulations

applying altimetry procedures to all stages of a night visual flight

applying operational requirements that apply to planning a flight on the basis of conducting an area navigation (RNAV) global navigation satellite system (GNSS) procedure at the destination

applying relevant aeronautical knowledge

applying relevant legislation and workplace procedures

calculating heading to steer to intercept a new or original track to or from a non-directional beacon (NDB)

calculating heading to steer to intercept desired inbound track before reaching an NDB

calculating LSALT for a night visual flight for a route published on a chart

calculating LSALT when uncertain of position

calculating relative bearing that will indicate a desired track to or from an NDB has been intercepted, given the intercept heading

calculating the heading to steer to intercept a new or original track to or from a Very High Frequency (VHF) Omni Directional Radio Range (VOR)

calculating track to and from an NDB, given heading and relative bearings

communicating effectively with others

completing relevant documentation

determining NDB station passage, abeam NDB station, NDB bearing the aircraft is on, track error and/or drift experienced, from an automatic direction finder (ADF) relative bearing indications

determining off-track distance experienced from VOR and distance measuring equipment (DME) cockpit indications

determining route for night visual flight with respect to:

forecast weather

controlled airspace including prohibited, restricted and danger (PRD) areas

specified route limitations

airways operational requirements

availability of published routes

en route alternate aerodromes

navigation aids

rated coverage

radio communication

determining scalloping, VOR station passage, abeam VOR station, VOR radial the aircraft is on, track error and/or drift experienced, from VOR cockpit indications

determining flight calculations:

time made good (TMG)

ground speed (GS)

estimated time of arrival (ETA)

time and distance to waypoint (WPT)

wind velocity (WV) in flight

determining whether a flight may proceed based on route, aircraft equipment and NVFR navigation requirements

identifying and correctly using equipment required when navigating an aircraft under NVFR

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting DME or GPS arrival information

interpreting typical GPS navigational displays latitude/longitude, distance and bearing to waypoint, course deviation indications (CDI)

implementing aviation risk management processes to minimise, control or eliminate hazards that may exist while navigating an aircraft under NVFR

maintaining compliance with regulatory requirements

maintaining interception and maintenance of GNSS defined tracks

managing abnormal operations and emergency procedures in control area (CTA), control zone (CTR), or Class G airspace and at non-controlled aerodromes

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

performing DME procedures:

fixing position, given cockpit instrument indications utilising two VHF omni directional radio range (VOR) stations

fixing position, given instrument indications utilising combinations of VOR, non-directional beacon (NDB) and DME

fixing position, given relative bearing indications utilising two NDB stations

performing NDB approaches:

calculating heading to steer to intercept a new or original track to or from an NDB

calculating heading to steer to intercept desired inbound track before reaching an NDB

calculating relative bearing that will indicate desired track to or from an NDB has been intercepted, given the intercept heading

calculating track to and from an NDB, given heading and relative bearings

determining NDB station passage, abeam NDB station, NDB bearing the aircraft is on, tracking error and/or drift experienced, from ADF relative bearing indications

fixing position, given relative bearing indications utilising two NDB stations

performing GNSS procedures:

interpreting DME or GNSS arrival information

interpreting typical GNSS navigational displays including latitude/longitude, distance and bearing to waypoint, CDI

performing VHF omni directional radio range (VOR) approaches:

calculating the heading to steer to intercept a new or original track to or from a VOR

determining off-track distance experienced from VOR and DME cockpit indications

determining scalloping, VOR station passage, abeam VOR station, VOR radial the aircraft is on, tracking error and/or drift experienced, from VOR cockpit indications

fixing position, given cockpit instrument indications utilising two VOR stations

fixing position, given instrument indications utilising combinations of VOR, NDB and DME

performing NVFR navigational functions within the parameters of authorised regulations, orders and operations manual procedures

predicting availability of approach receiver autonomous integrity monitoring (RAIM) at destination or alternate aerodrome and limitations that apply to the prediction

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

recognising and taking appropriate action for GNSS warnings and messages

recognising significant variances from forecast meteorological conditions and taking appropriate actions, including issuing an air report (AIREP)

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

selecting and using required personal protective clothing and equipment conforming to industry and WHS/OHS standards

sourcing and interpreting aviation weather forecast products and services appropriate to flight planning and navigation procedures

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

abnormal operations and emergency procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

aerodrome landing area (ALA) or helicopter landing site (HLS) dimension and lighting requirements for fixed or rotary wing NVFR operations

aerodrome operations where surrounding light is limited

airways clearance requirements for entering, operating in and departing CTA and CTR, including what details to provide to air traffic control (ATC), and what details to expect from ATC

airways clearance requirements for operating in all classes of airspace, including lead time required for flight plan submission, contents, clearance void time, and read back requirement

alternate aerodrome planning requirements

altimetry procedures to all stages of a night visual flight

ATC procedures relevant to NVFR operations

ATC requirements for a change of level in CTA, including in an emergency

compulsory reporting points for route selected

controlled area protection

departure, climb, transition to cruise (levelling out), cruise, change of levels, descent and visual approach procedures at night, in CTA, CTR, Class G airspace and at non-controlled aerodromes

dimensions of the significant safety sector when calculating lowest safe altitude (LSALT) for a route not published on a chart

distance measuring equipment (DME):

DME or GNSS arrival information

DME or GNSS arrival procedures and limitations in all classes of airspace

pilot responsibilities when DME or GNSS arrival is conducted outside controlled airspace

conditions permitting descent below LSALT

procedure for joining circuit using a DME or GNSS arrival

principles of operation of DME or GNSS radio equipment

procedures for handling loss of radio communication during a DME or GNSS arrival

explanation of conditions for descent below LSALT

GNSS:

principles of operation, performance limitations and errors of a GNSS system

methods of position fixing using a GNSS system

GNSS operating procedures for typical navigational tasks using a specific type of aircraft equipment

GNSS operating procedures that provide safeguards against navigational errors and loss of situational awareness

indications of waypoint passage

GNSS operational and serviceability checks

human factor limitations associated with using GNSS equipment

requirements applicable to pilots and equipment for GNSS operations

parameters applicable to tracking tolerances, automatic waypoint sequencing, CDI sensitivity and RAIM availability

mode of operation required during each segment of a GNSS/NPA, conditions required to transition to and operate in that mode, and associated CDI sensitivity and RAIM protection provided

parameters applicable to RAIM warnings in en route, terminal and approach modes

effect of availability or otherwise of baro-aiding on RAIM availability and prediction

effect of satellite unserviceability on reliability of each type of prediction

effect of each type of RAIM prediction operational requirements

operational requirements that apply to planning a flight on the basis of conducting a RNAV (GNSS) procedure at the destination

factors that may adversely affect the conduct of a GNSS/NPA and explain suitable pilot procedures to minimise such effects

operating procedures for GNSS equipment that reduce or eliminate errors due to any of these factors

human factors and physiological limitations for conducting NVFR operations

loss of radio communication procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

maximum permissible time interval in between ATC transmissions during radar vectoring

methods of establishing and calculating LSALT:

from published charts

for route not published

position uncertainty

minimum NVFR aircraft equipment requirements

navigation requirements for a night visual flight using radio, self-contained or long-range navigation systems

navigation requirements for a night visual flight using visual reference to ground and water

navigation requirements for night visual flight with respect to time interval between fixes, accuracy of time reference, and accuracy and procedures in track-keeping

navigation route requirements for NVFR:

forecast weather

controlled airspace (CTA)

prohibited, restricted and danger areas (PRD)

engine out performance for multi-engine aircraft

specified route limitations

airways operational requirements

availability of published routes

en route

alternate aerodromes

navigation aids

rated coverage

radio communication

navigation tolerance for a night visual flight avoiding CTA

NDB:

effects of coastal refraction, night error, thunderstorms, mountainous areas, types of terrain and altitude of aircraft on NDB indications or range

methods of selecting and using the most appropriate NDB for tracking during navigation

NDB position fixing, tracking techniques, procedures and limitations

operation of VHF aerodrome lighting pilot activated lighting (PAL)

pre-flight altimeter accuracy check for a night visual flight

principles of operations, limitations and errors for NVFR radio navigation systems

privileges and limitations of NVFR rating

procedures of night visual flight in all classes of airspace when diverting from track due to navigation or weather

radar emergency procedures, including loss of radio communication, radar failure, transponder emergency codes, and aircraft emergencies

radar services that are provided by ATC

radar vectoring procedures, including radio procedures and phraseologies

radio procedures in CTA, CTR, Class G airspace and at non-controlled aerodromes

requirements and procedure for a diversion to an alternate aerodrome

requirements for departure and descent for clearance from terrain

requirements for positive radio fixing and the most precise track guidance

separation provisions between NVFR flights, and IFR and VFR flights in the various classes of CTA

separation provisions between NVFR flights, and IFR and VFR flights in GAAP CTR

VHF omni directional radio range (VOR):

VOR instrument settings required to provide command indications when flying on given tracks both to and from the VOR

VOR tracking techniques, procedures and limitations.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.