ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Operate a multi-engine aeroplane in all phases of flight

1.1

Normal operations of multi-engine aeroplane type on the ground and in flight are conducted in accordance with the aircraft flight manual (AFM), pilot’s operating handbook (POH) and company operating procedures

1.2

Asymmetric operations for all phases of flight are anticipated and contingencies are planned

1.3

Plan of action is self-briefed or briefed to crew members to ensure safest outcome in asymmetric operations

2

Manage engine failure/malfunction in flight

2.1

Control of aeroplane is maintained and/or regained during implementation of emergency response procedures

2.2

Failed/malfunctioning engine is identified and confirmed

2.3

Power set on serviceable engine/s and aeroplane configuration is adjusted to achieve desired aeroplane performance

2.4

Failed/malfunctioning engine is managed

2.5

Indicated airspeed is maintained above minimum controllable airspeed (Vmca)

2.6

Air traffic control (ATC) or another agency capable of assistance is advised of situation and intentions

2.7

Recovery or diversion to appropriate aerodrome is evaluated and conducted

3

Manage engine failure/malfunction after take-off

3.1

Engine failure/malfunction is managed after take-off while control of aircraft flight path is maintained

3.2

Initial climb not less than best engine out angle of climb speed (VX) or best engine out rate of climb speed (VY) until clear of obstacles, then VY is maintained

3.3

Recovery or diversion to appropriate aerodrome is evaluated and conducted

4

Perform rejected take-off

4.1

Take-off is aborted prior to speed beyond which take-off can no longer be safely aborted (V1)or at a decision point during take-off where abort procedure can be initiated and aeroplane stopped on remaining runway/stopway

4.2

Power is reduced smoothly and promptly

4.3

Spoilers, prop fine/reverse, thrust reverse, wheel brakes and other drag and braking devices are activated

4.4

Positive control is maintained to bring aeroplane to a safe stop

4.5

Engine failure procedures and/or checklists are initiated and completed

5

Manage engine failure/malfunction during approach/landing

5.1

Control of aeroplane flight path is maintained during implementation of emergency response procedures

5.2

Engine inoperative approach is performed

5.3

Decision is made to continue or abort approach/landing

5.4

Decision height for landing is nominated

5.5

ATC or other agency capable of providing assistance is advised of situation and intentions

5.6

Smooth, positively-controlled flight profile is flown, from which a controlled landing could be achieved

5.7

Positive directional control is maintained and cross-wind corrections are applied during after-landing roll while maintaining centreline within tolerances

5.8

Spoilers, prop reverse, thrust reversers, wheel brakes, and other drag or braking devices are applied to bring airplane to a safe stop after landing

6

Conduct go-around or missed approach with engine failure

6.1

Engine failure in a multi-engine aeroplane during a go-around or missed approach is identified and confirmed

6.2

Control of aeroplane flight path is maintained during implementation of emergency response procedures

6.3

Engine inoperative go-around is performed from decision height

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant aeroplane aeronautical knowledge

applying relevant air safety practices and regulations

applying relevant legislation and workplace procedures

calculating accelerate/stop distance

calculating fuel flow and true airspeed with one engine inoperative

calculating initial rate of climb and climb gradient for one engine inoperative after take-off

calculating point no return (PNR) and equi time point (ETP)/critical point (CP) for one engine inoperative with maximum fuel

calculating the speed beyond which take-off can no longer be safely aborted (V1) for any specified take-off conditions

communicating effectively with others

completing relevant documentation

controlling and managing aeroplane during flight with failed engine/s, in accordance with the aircraft flight manual (AFM)/pilot’s operating handbook (POH)

determining if range of aeroplane increases or decreases following an engine failure

extracting, calculating and applying all performance information applicable to aeroplane

identifying and correctly using equipment required to operate a multi-engine fixed wing aeroplane

identifying critical/malfunctioning engine correctly

identifying, and managing emergency and abnormal situations while maintaining control of the aeroplane

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting and following operational instructions and prioritising work

maintaining compliance with relevant regulatory requirements

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying identified problems promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

setting local or area barometric pressure adjusted for sea level (QNH) at appropriate stages of flight

setting priorities and managing workload to ensure safe task completion in the time available

working collaboratively with others

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

airspeed limitations including:

velocity normal operations – Vno

velocity acceleration – Va

velocity best angle of climb – Vx

velocity best rate of climb – Vy

velocity never exceed – Vne

maximum flap extended speed – Vfe

velocity landing gear operations – Vlo

velocity landing gear extended – Vle

velocity landing gear down – Vlo2

maximum crosswind

turbulence penetration speed

maximum load factor

conditions that would increase take-off decision speed (V1)

emergency airspeeds including:

velocity minimum control speed – Vmca

velocity safe single engine – VSSE

engine/s inoperative climb

approach and final speed

emergency descent

best glide range speeds

emergency procedures for

engine failure after take-off

engine fire on the ground and airborne

engine failure in the cruise

waste gate failure

propeller/turbine over-speed

in a Defence context, relevant Defence Orders and Instructions

markings on airspeed indicator that apply to failed engine operations

methods of regaining control of an aeroplane with a failed engine that is flying at a speed less than Vmca

normal and crosswind take-off and landing procedures:

climb

cruise

descent procedures including, airspeeds, configurations, method of drift allowance

setting of flight instruments

abnormal/emergency procedures

other abnormal or emergency items as contained in the AFM/POH

performance the aeroplane can achieve after reaching Vy or V2 during asymmetric flight

power, flight and configuration requirements that apply to Vmca

relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders

relevant WHS/OHS procedures and regulations

safety implications of asymmetric flight below Vmca

technique and procedure for carrying out a rejected take-off after engine/system/s failure/warnings, including related safety factors

techniques and procedures used during engine failure on take-off, appropriate reference airspeeds, and specific pilot actions required

techniques and procedures used to conduct an asymmetric go-around or missed approach during engine failure on take-off, appropriate reference airspeeds, and specific pilot actions required.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Operate a multi-engine aeroplane in all phases of flight

1.1

Normal operations of multi-engine aeroplane type on the ground and in flight are conducted in accordance with the aircraft flight manual (AFM), pilot’s operating handbook (POH) and company operating procedures

1.2

Asymmetric operations for all phases of flight are anticipated and contingencies are planned

1.3

Plan of action is self-briefed or briefed to crew members to ensure safest outcome in asymmetric operations

2

Manage engine failure/malfunction in flight

2.1

Control of aeroplane is maintained and/or regained during implementation of emergency response procedures

2.2

Failed/malfunctioning engine is identified and confirmed

2.3

Power set on serviceable engine/s and aeroplane configuration is adjusted to achieve desired aeroplane performance

2.4

Failed/malfunctioning engine is managed

2.5

Indicated airspeed is maintained above minimum controllable airspeed (Vmca)

2.6

Air traffic control (ATC) or another agency capable of assistance is advised of situation and intentions

2.7

Recovery or diversion to appropriate aerodrome is evaluated and conducted

3

Manage engine failure/malfunction after take-off

3.1

Engine failure/malfunction is managed after take-off while control of aircraft flight path is maintained

3.2

Initial climb not less than best engine out angle of climb speed (VX) or best engine out rate of climb speed (VY) until clear of obstacles, then VY is maintained

3.3

Recovery or diversion to appropriate aerodrome is evaluated and conducted

4

Perform rejected take-off

4.1

Take-off is aborted prior to speed beyond which take-off can no longer be safely aborted (V1)or at a decision point during take-off where abort procedure can be initiated and aeroplane stopped on remaining runway/stopway

4.2

Power is reduced smoothly and promptly

4.3

Spoilers, prop fine/reverse, thrust reverse, wheel brakes and other drag and braking devices are activated

4.4

Positive control is maintained to bring aeroplane to a safe stop

4.5

Engine failure procedures and/or checklists are initiated and completed

5

Manage engine failure/malfunction during approach/landing

5.1

Control of aeroplane flight path is maintained during implementation of emergency response procedures

5.2

Engine inoperative approach is performed

5.3

Decision is made to continue or abort approach/landing

5.4

Decision height for landing is nominated

5.5

ATC or other agency capable of providing assistance is advised of situation and intentions

5.6

Smooth, positively-controlled flight profile is flown, from which a controlled landing could be achieved

5.7

Positive directional control is maintained and cross-wind corrections are applied during after-landing roll while maintaining centreline within tolerances

5.8

Spoilers, prop reverse, thrust reversers, wheel brakes, and other drag or braking devices are applied to bring airplane to a safe stop after landing

6

Conduct go-around or missed approach with engine failure

6.1

Engine failure in a multi-engine aeroplane during a go-around or missed approach is identified and confirmed

6.2

Control of aeroplane flight path is maintained during implementation of emergency response procedures

6.3

Engine inoperative go-around is performed from decision height

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant aeroplane aeronautical knowledge

applying relevant air safety practices and regulations

applying relevant legislation and workplace procedures

calculating accelerate/stop distance

calculating fuel flow and true airspeed with one engine inoperative

calculating initial rate of climb and climb gradient for one engine inoperative after take-off

calculating point no return (PNR) and equi time point (ETP)/critical point (CP) for one engine inoperative with maximum fuel

calculating the speed beyond which take-off can no longer be safely aborted (V1) for any specified take-off conditions

communicating effectively with others

completing relevant documentation

controlling and managing aeroplane during flight with failed engine/s, in accordance with the aircraft flight manual (AFM)/pilot’s operating handbook (POH)

determining if range of aeroplane increases or decreases following an engine failure

extracting, calculating and applying all performance information applicable to aeroplane

identifying and correctly using equipment required to operate a multi-engine fixed wing aeroplane

identifying critical/malfunctioning engine correctly

identifying, and managing emergency and abnormal situations while maintaining control of the aeroplane

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting and following operational instructions and prioritising work

maintaining compliance with relevant regulatory requirements

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying identified problems promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

setting local or area barometric pressure adjusted for sea level (QNH) at appropriate stages of flight

setting priorities and managing workload to ensure safe task completion in the time available

working collaboratively with others

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

airspeed limitations including:

velocity normal operations – Vno

velocity acceleration – Va

velocity best angle of climb – Vx

velocity best rate of climb – Vy

velocity never exceed – Vne

maximum flap extended speed – Vfe

velocity landing gear operations – Vlo

velocity landing gear extended – Vle

velocity landing gear down – Vlo2

maximum crosswind

turbulence penetration speed

maximum load factor

conditions that would increase take-off decision speed (V1)

emergency airspeeds including:

velocity minimum control speed – Vmca

velocity safe single engine – VSSE

engine/s inoperative climb

approach and final speed

emergency descent

best glide range speeds

emergency procedures for

engine failure after take-off

engine fire on the ground and airborne

engine failure in the cruise

waste gate failure

propeller/turbine over-speed

in a Defence context, relevant Defence Orders and Instructions

markings on airspeed indicator that apply to failed engine operations

methods of regaining control of an aeroplane with a failed engine that is flying at a speed less than Vmca

normal and crosswind take-off and landing procedures:

climb

cruise

descent procedures including, airspeeds, configurations, method of drift allowance

setting of flight instruments

abnormal/emergency procedures

other abnormal or emergency items as contained in the AFM/POH

performance the aeroplane can achieve after reaching Vy or V2 during asymmetric flight

power, flight and configuration requirements that apply to Vmca

relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders

relevant WHS/OHS procedures and regulations

safety implications of asymmetric flight below Vmca

technique and procedure for carrying out a rejected take-off after engine/system/s failure/warnings, including related safety factors

techniques and procedures used during engine failure on take-off, appropriate reference airspeeds, and specific pilot actions required

techniques and procedures used to conduct an asymmetric go-around or missed approach during engine failure on take-off, appropriate reference airspeeds, and specific pilot actions required.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.