- CPCCCM2001A - Read and interpret plans and specifications
Assessor Resource
CPCCCM2001A
Read and interpret plans and specifications
Assessment tool
Version 1.0
Issue Date: June 2024
This unit of competency supports achievement of basic reading and interpretation of plans and specifications commonly used in the construction industry.
This unit of competency specifies the outcomes required to read and interpret plans and specifications relevant to construction operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and specifications on a site plan, the comprehension of written job specifications and the recognition of document status and amendment detail.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Nil
Co-Requisites
Nil | ||
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of the ability to: locate, interpret and apply relevant information, standards and specifications comply with site safety plan, OHS regulations and state and territory legislation applicable to workplace operations comply with organisational policies and procedures, including quality requirements communicate and work effectively and safely with others for a minimum of two different projects, read and interpret the project plans, including: confirmation of amendment status and drawings confirmed 'for construction' orientation of plans to the ground six key features on both the plan and the site confirmation of six items of information from the title block of the project plans six construction dimensions, levels and locations from the project plans six ancillary works dimensions, levels and locations from the project plans for a minimum of two formal specifications, identify the dimensions, material requirements and processes to be followed. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: an induction procedure and requirement realistic tasks or simulated tasks covering the mandatory task requirements relevant specifications and work instructions tools and equipment appropriate to applying safe work practices support materials appropriate to activity workplace instructions relating to safe work practices and addressing hazards and emergencies material safety data sheets research resources, including industry related systems information. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm that competency is verified and able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Required skills for this unit are: communication skills to: enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand read and interpret: documentation from a variety of sources drawings and specifications use language and concepts appropriate to cultural differences use and interpret non-verbal communication, such as hand signals identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials numeracy skills to apply measurements and make calculations, including heights, areas, volumes and grades organisational skills, including the ability to plan and set out work teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities technological skills to: use a range of mobile technology, such as two-way radio and mobile phones voice and hand signals to access and understand site-specific instructions. |
Required knowledge |
Required knowledge for this unit is: basic calculations of heights, areas, volumes and grades commonly used construction symbols and abbreviations construction terminology drawing conventions features of plans and elevations, including direction, scale, key, contours, symbols and abbreviations job safety analysis (JSA) and safe work method statements key features of formal job specifications processes for application of scales in plan preparation and interpretation project quality requirements site and equipment safety (OHS) requirements techniques for orienting/confirming the orientation of a plan. |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Plans and drawings include: | construction plans cross-sectional plans dimensions and notes illustrations longitudinal plans project specifications site plans structural detail and specification providing illustrations and dimensions. |
Key features of plans and specifications include: | characteristics compatibility construction location pattern dimension quantities sizes type of product or service. |
Quality requirements include relevant regulations, including: | Australian standards internal company quality policy and standards manufacturer specifications, where specified workplace operations and procedures. |
Environmental requirements include: | clean-up management waste management. |
Project documentation includes: | contracts drawings schedule of rates specifications standard procedures and practices supplementary specifications work schedules. |
Specifications include: | detail relating to materials and quality of work, quality assurance, nominated subcontractors, and provision of site access/facilities details relating to performance, including: characteristics material types standards of work tolerances treatments and finishes. |
Information includes: | diagrams or sketches and graphics instructions issued by authorised organisational or external personnel manufacturer specifications and instructions maps material safety data sheets (MSDS) memos organisation work specifications and requirements. plans and specifications regulatory and legislative requirements pertaining to operations and the environment relevant Australian standards safe work procedures related to construction site operations signage verbal or written and graphical instructions work bulletins work schedules. |
Material attributes include: | characteristics construction requirements treatments and finishes types. |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Main types of plans and drawings used in the construction sector of the industry are identified. | |||
Key features and functions of each type of drawing are identified. | |||
Quality requirements of company operations are recognised and adhered to. | |||
Environmental requirements and controls are identified from job plans, specifications and environmental plan. | |||
Title panel of project documentation is checked to verify latest amendments to drawing. | |||
Amendments to specifications are checked to ensure currency of information and conveyed to others where appropriate. | |||
Construction symbols and abbreviations are recognised. | |||
Legend is located on project drawings, and symbols and abbreviations are correctly interpreted. | |||
Orientation of the plan with the site is achieved. | |||
Key features of the site are identified and located. | |||
Access to site is gained and services, main features, contours and datum are identified. | |||
Dimensions for project and nominated locations are identified. | |||
Construction types and dimensions for nominated locations are identified. | |||
Environmental controls and locations are identified. | |||
Location, dimensions and tolerances for ancillary works are identified. | |||
Job specifications are identified from drawings, notes and descriptions. | |||
Standards of work, finishes and tolerances are identified from the project specifications. | |||
Material attributes are identified from specifications. |
Forms
Assessment Cover Sheet
CPCCCM2001A - Read and interpret plans and specifications
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
CPCCCM2001A - Read and interpret plans and specifications
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: