Assessor Resource

CPCCCO3043A
Cure concrete

Assessment tool

Version 1.0
Issue Date: March 2024


This unit of competency supports the role of concreters working on residential, commercial or civil construction sites.

This unit of competency specifies the outcomes required to carry out the initial curing process to poured concrete in order to control moisture evaporation from finished concrete.

The unit includes using curing agents and curing techniques according to engineering specifications. It may also include working with others and as a member of a team.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

CPCCOHS2001A

Apply OHS requirements, policies and procedures in the construction industry


Employability Skills

This unit contains employability skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed by undertaking a range of tasks in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person should demonstrate the ability to apply curing compound and methods to a minimum of five projects each measuring a minimum of 100 square metres of finished concrete according to project specifications, using at least two of the compounds and methods specified in the range statement.

The evidence provided should demonstrate the ability to:

locate, interpret and apply information, standards and specifications relating to curing concrete

comply with site safety plans and procedures

comply with organisational policies and procedures relating to curing concrete while maintaining quality requirements outlined in job specifications

safely and effectively operate and use plant, tools and equipment required to cure concrete

communicate and work effectively and safely with others.

Context of and specific resources for assessment

Assessment of this unit:

must be in the context of the work environment

may be conducted in an off-site context, provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills

must meet relevant compliance requirements.

Resource implications for assessment include:

an induction procedure

realistic tasks or simulated tasks covering the mandatory task requirements

tools and equipment appropriate to applying safe work practices

support materials appropriate to curing concrete

workplace instructions relating to safe work practices and addressing hazards and emergencies

safety data sheets.

Method of assessment

Assessment for this unit must verify the practical application of the required skills and knowledge, using a combination of the following methods:

direct observation of tasks in real or simulated work conditions

questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

review of relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Guidance information for assessment

This unit could be assessed on its own or in combination with other units relevant to the job function for example:

CPCCCO2022A Use and maintain concreting plant, tools and equipment.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

learning skills to:

evaluate own actions and make judgments about performance and necessary improvements

respond to change, such as differences in work site, and environmental and quality requirements

numeracy skills to calculate and confirm correct quantities of materials for work tasks

oral communication skills to:

enable clear and direct communication, using questioning to identify and confirm requirements, and share information

report work site hazards to appropriate personnel, including faults in tools, equipment or materials

use language and concepts appropriate to cultural differences

reading skills to:

interpret documentation, including drawings and specifications

interpret manufacturer instructions for safely handling tools, equipment and materials

understand written instructions, procedures and signage

writing skills to complete equipment fault forms

Required knowledge

concrete curing techniques, including curing duration and effect on ultimate strength

processes for material storage and environmentally friendly waste management

processes for calculating material requirements

properties of concrete to be able to minimise waste, delay and faults in curing concrete

quality requirements relevant to curing concrete

types and applications of concrete materials used in the curing process

types, characteristics, uses and limitations of plant, tools and equipment relevant to curing concrete

types, location and use of relevant safety resources and information:

job safety analyses (JSA) and safe work method statements (SWMS)

safety data sheets (SDS)

signage and barricades

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Work health and safety requirements must comply with according to state and territory legislation and regulations and project safety plan, and may include:

assistance of others or the use of manual or mechanical lifting devices with handling activities where size, weight or other issues, such as disability, are a factor

emergency procedures, including extinguishing fires, organisational first aid requirements, and evacuation procedures

hazard control

hazardous materials and substances

personal protective equipment (PPE) prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

earth leakage boxes

lighting

power cables, including overhead service trays, cables and conduits

signage and restricted access barriers

surrounding structures

traffic control

trip hazards

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

working outdoors in warm climates

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

Information may include:

instructions issued by authorised organisational and external personnel

memos

regulatory and legislative requirements relating to curing concrete, including relevant Australian standards

safe work procedures relating to curing concrete

safety data sheets

signage

verbal, written and diagrammatic instructions, including manufacturer specifications and instructions where specified

work bulletins

work schedules, plans and specifications.

Planning and preparation must include:

assessing conditions and hazards

calculating time required to complete task

determining work requirements, safety plans and procedures

identifying and rectifying equipment defects

inspecting the work site.

Tools and equipment may include:

hoses and sprinklers

rollers

spray applicators

tarpaulins and covers.

Quality requirements must include:

internal organisational quality policy and standards

manufacturer specifications where specified

relevant regulations and Australian standards

workplace operations and procedures.

Materials may include:

curing compounds

evaporation retardants

objects to hold plastic film in place

plastic film

steam

water.

Environmental requirements may include:

clean-up management

dust and noise control

stormwater management

vibration management

waste management.

Curing compounds may include:

chlorinated compounds

hydrocarbon compounds

polyvinyl alcohol (PVA) compounds

silicate compounds

solvent-based acrylic compounds

water

water-based acrylic compounds

wax-based compounds.

Curing methods may include:

curing compounds

fogging

hessian overlays

hosing

impervious plastic membranes

misting

ponding

sprinklers

steam.

Protecting concrete must include:

isolating and/or barricading the area

using plastic membrane where required.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions, work health and safety (WHS) requirements and other information relevant to the work are identified, confirmed and applied to planning and preparation. 
Plant, tools and equipment consistent with the requirements of the job are selected and checked for serviceability, and faults are rectified and reported before work begins. 
Material quantity requirements are identified and calculated according to plans, specifications and quality requirements. 
Materials appropriate to the work application are obtained, prepared, safely handled and located ready for use. 
Environmental requirements are identified for the project according to environmental plans and regulatory requirements. 

Forms

Assessment Cover Sheet

CPCCCO3043A - Cure concrete
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPCCCO3043A - Cure concrete

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: