- CPCCSF2003A - Cut and bend materials using oxy-LPG equipment
Assessor Resource
CPCCSF2003A
Cut and bend materials using oxy-LPG equipment
Assessment tool
Version 1.0
Issue Date: June 2024
This unit supports the attainment of skills and knowledge to use oxy-LPG-acetylene equipment to cut and bend materials for steelfixing applications, which includes working with others and as a member of a team. It does not involve specialist welding techniques.
This unit of competency specifies the outcomes required to heat, cut and bend construction materials using oxy-LPG equipment.
It includes planning and preparation for the work, setting up and testing the equipment, cutting materials, heating and bending materials, shutdown of equipment and completion of clean-up activities.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
CPCCOHS2001A
Apply OHS requirements, policies and procedures in the construction industry
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of the ability to: locate, interpret and apply of relevant information, standards and specifications comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations comply with organisational policies and procedures, including quality requirements safely and effectively use tools, plant and equipment communicate and work effectively and safely with others use both oxy-acetylene and LPG systems to cut to specification a range of bars up to and including 36mm heat and bend a minimum of three bars to specification including at least one 36mm bar. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: an induction procedure and requirement realistic tasks or simulated tasks covering the mandatory task requirements relevant specifications and work instructions tools and equipment appropriate to applying safe work practices support materials appropriate to activity workplace instructions relating to safe work practices and addressing hazards and emergencies material safety data sheets research resources, including industry related systems information. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm that competency is verified and able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Required skills for this unit are: communication skills to: determine requirements follow instructions read and interpret: documentation from a variety of sources drawings and specifications report faults use language and concepts appropriate to cultural differences use and interpret non-verbal communication, such as hand signals identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials mathematical and numeracy skills to apply measurements and calculations organisational skills, including the ability to plan and set out work teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities technological skills to: use a range of mobile technology, such as two-way radio and mobile phones voice and hand signals to access and understand site-specific instructions. |
Required knowledge |
Required knowledge for this unit is: construction and steelfixing terminology job safety analysis (JSA) and safe work method statements material safety data sheets (MSDS) materials storage and environmentally friendly waste management oxy acetylene and LPG heating and cutting equipment set-up and operating techniques oxy acetylene and LPG heating and cutting equipment types, characteristics, uses and limitations plans, drawings and specifications processes for the calculation of material requirements quality requirements types and properties of steelfixing materials workplace and equipment safety requirements. |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Information includes: | diagrams or sketches instructions issued by authorised organisational or external personnel manufacturer specifications and instructions, where specified MSDS memos regulatory and legislative requirements pertaining to cut and bend materials using oxy/LPG equipment relevant Australian standards safe work procedures relating to cut and bend materials using oxy/LPG equipment signage verbal, written and graphical instructions work bulletins work schedules, plans and specifications. |
Scope of work: | cutting of steel includes cutting up of waste for salvage, cutting reinforcement steel and cutting holes in plate bending includes reinforcement steel all work is to conform to the requirements of relevant Australian standards. |
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor hazard control hazardous materials and substances, including cement and curing agents organisational first aid PPE prescribed under legislation, regulations and workplace policies and practices safe operating procedures, including the conduct of operational risk assessment and treatments associated with: cutting, grinding and welding equipment lighting power equipment power leads and sources trip hazards work site visitors and the public working in confined spaces working in proximity to others working with metals under stress use of firefighting equipment use of tools and equipment workplace environmental requirements and safety. |
Equipment includes: | cylinders regulators gas tubing cutting blowpipes flint lighters measuring tapes and rules clamps and support stands. |
Materials: | include: cutting consumables deformed bars mesh sheets of deformed bars mesh sheets of plain bars plain rods may include: pipe sections scaffolding components structural steel sections. |
Quality requirements include relevant regulations, including: | Australian standards internal company quality policy and standards manufacturer specifications workplace operations and procedures. |
Environmental requirements include: | clean-up management dust and noise waste management. |
Statutory and regulatory authorities include: | federal, state and local authorities administering the applicable Acts, regulations and codes of practice. |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Work instructions, including plans, specifications, quality requirements and operational details are obtained from relevant information, confirmed and applied to the scope of work performed. | |||
Safety (OHS) requirements are followed in accordance with safety plans and policies. | |||
Signage and barricade requirements are identified and implemented. | |||
Plant, tools and equipment are selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. | |||
Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements. | |||
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. | |||
Environmental requirements are identified for the project in accordance with environmental plans and statutory and legislative authority obligations and applied. | |||
Correct fire extinguisher is selected and located to be readily accessible prior to and during operations. | |||
Regulators are attached to oxy and acetylene bottles in accordance with manufacturer specifications and OHS regulations. | |||
Lines are purged to manufacturer recommendations prior to lighting up. | |||
Equipment is tested for leaks and corrective action undertaken or faults reported. | |||
Correct pressures and cutting tips are selected in accordance with material to be cut and manufacturer specifications. | |||
Material is accurately marked and secured or clamped ready for cutting. | |||
Torch is lit correctly and safely according to manufacturer specifications. | |||
Setting of flame is adjusted for cutting to manufacturer recommendations. | |||
Correct cutting position is adopted during cutting to set-out mark. | |||
Material is accurately marked and securely clamped ready for cutting. | |||
Torch is lit correctly and safely according to manufacturer specifications. | |||
Heat is applied to specified material and weakening effects of the heating process are minimised. | |||
Material is bent to specification and correctly cooled. | |||
Torch is switched off according to manufacturer specifications. | |||
Gas supply is shut off according to manufacturer specifications. | |||
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. | |||
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices. |
Forms
Assessment Cover Sheet
CPCCSF2003A - Cut and bend materials using oxy-LPG equipment
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
CPCCSF2003A - Cut and bend materials using oxy-LPG equipment
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: