CPCCSP3001A - Apply float and render to straight and curved surfaces
Assessor Resource
CPCCSP3001A Apply float and render to straight and curved surfaces
Assessment tool
Version 1.0 Issue Date: April 2024
This unit supports the attainment of skills and knowledge to apply floated or rendered materials to a range of straight and curved construction surfaces, which includes working with others and as a member of a team.
This unit of competency specifies the outcomes required to float, render and finish flat and curved solid plastering work.
It includes planning and preparation for the work, preparation of templates, preparation of the background surface, application of floating and rendering to flat and curved surfaces and to piers, finishing of the rendering coats, and post work clean-up activities.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
CPCCOHS2001A
Apply OHS requirements, policies and procedures in the construction industry
Co-Requisites
Nil
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to provide evidence of the ability to:
locate, interpret and apply of relevant information, standards and specifications
comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations
comply with organisational policies and procedures, including quality requirements
safely and effectively use tools and equipment
communicate and work effectively and safely with others
floating, rendering and finishing to specification a minimum of three surfaces, including:
a curved wall
a ceiling
a column.
Context of and specific resources for assessment
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian standards' requirements.
Resource implications for assessment include:
an induction procedure and requirement
realistic tasks or simulated tasks covering the mandatory task requirements
relevant specifications and work instructions
tools and equipment appropriate to applying safe work practices
support materials appropriate to activity
workplace instructions relating to safe work practices and addressing hazards and emergencies
material safety data sheets
research resources, including industry related systems information.
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.
Method of assessment
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
reinforce the integration of employability skills with workplace tasks and job roles
confirm that competency is verified and able to be transferred to other circumstances and environments.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.
Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills
Required skills for this unit are:
communication skills to:
determine requirements
follow instructions
read and interpret:
documentation from a variety of sources
drawings and specifications
report faults
use language and concepts appropriate to cultural differences
use and interpret non-verbal communication, such as hand signals
identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials
numeracy skills to apply measurements and calculations
organisational skills, including the ability to plan and set out work
teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities
technological skills to:
use a range of mobile technology, such as two-way radio and mobile phones
voice and hand signals to access and understand site-specific instructions.
Required knowledge
Required knowledge for this unit is:
flat and curved surface plastering floating, rendering and finishing techniques
job safety analysis (JSA) and safe work method statements
material safety data sheets (MSDS)
materials storage and environmentally friendly waste management
plans, drawings and specifications
plastering tools and equipment types, characteristics, uses and limitations
processes for the calculation of material requirements
quality requirements
solid plastering terminology
systems and techniques for safe handling of materials
types, characteristics, uses and limitations of solid plastering materials and components
workplace and equipment safety requirements.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Information includes:
diagrams or sketches
instructions issued by authorised organisational or external personnel
manufacturer specifications and instructions, where specified
MSDS
memos
regulatory and legislative requirements pertaining to the application of float and render
relevant Australian standards
safe work procedures relating to the application of float and render
signage
verbal, written and graphical instructions
work bulletins
work schedules, plans and specifications.
Scope of work:
floating, rendering and finishing include horizontal, vertical and curved surfaces, including walls, reveals, sills, piers and columns
templates include those for curved work and circular columns
background surfaces include concrete, concrete blockwork, brickwork, stonework, and timber or metal lathing
cleaning and preparation of background surfaces include wire brushing, grinding, washing down, chipping and blast cleaning
wash coating may be applied using trowel, brush or nozzle spray
bond coating may be applied using nozzle spray, roller or brush.
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:
emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation
handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor
hazard control
hazardous materials and substances, including cement and curing agents
organisational first aid
PPE prescribed under legislation, regulations and workplace policies and practices
safe operating procedures, including the conduct of operational risk assessment and treatments associated with:
lighting
power equipment
power leads and sources
trip hazards
work site visitors and the public
working in confined spaces
working in proximity to others
use of firefighting equipment
use of tools and equipment
workplace environmental requirements and safety.
Tools and equipment:
include:
measuring tapes and rules
spirit levels
squares
trowels
floats
brushes
screed boards
straight edges
mortar boards and stands
shovels
wheelbarrows
hawks
joint rules
small tools
plumb bobs and mason's squares
buckets
sieves
power leads
hammers
tin snips
may include:
grinders
wood saws
metal files
concrete mixers and scaffolding.
Materials:
solid plastering materials and components include:
casing beads
corner beads
lime
lime putty
plaster compounds and finish coats
render and setting coats mix composition, including additives such as plasticisers, colour and waterproofing agents
sand
other materials may include:
flat marine ply
flat sheet plain galvanised iron (PGI)
nails
timber.
Quality requirements include relevant regulations, including:
Australian standards
internal company quality policy and standards
manufacturer specifications
workplace operations and procedures.
Environmental requirements include:
clean-up management
dust and noise
stormwater protection
waste management.
Statutory and regulatory authorities include:
federal, state and local authorities administering the applicable Acts, regulations and codes of practice.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Work instructions, including plans, specifications, quality requirements and operational details are obtained from relevant information, confirmed and applied to the scope of work performed.
Safety (OHS) requirements are followed in accordance with safety plans and policies.
Signage and barricade requirements are identified and implemented.
Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.
Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements.
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
Environmental requirements are identified for the project in accordance with environmental plans and statutory and legislative authority obligations and applied.
Material is selected to manufacturer templates.
Radiuses and shapes are established for curves and columns according to plans and specifications.
Templates are manufactured and formed to suit job requirements.
Background surface is identified and wire-brushed if required.
Dash coat is mixed and applied liberally to wetted surface.
Bonding coats using patent products are applied to specifications.
Metal beads are selected for external or squint arises.
Metal beads are fixed to arises and checked for accuracy.
Screeding lines or guides are established to specified tolerances.
Float is used and applied to Australian standards and plans and specifications.
Floating coat is applied and ruled off to screed.
Surface is finished, plumbed and levelled to specified alignment tolerance.
Heads, reveals and sills are finished square off to wall ace and back into opening.
Internal angles, ceiling and floor lines are accurately cut.
Floating coat is applied using floating profiles and rules, and Dutch pins or hooks so that face of pier is plumb and ruled off.
Face is squared off to form returns and reveals, rules are removed and arises are left square or radiussed as required.
Metal beading is fixed to base surface to form a panel with expansion joint so that panel is plumb and square to specified position.
Panels are finished to true, flat surfaces, suitable for applying plaster and lime setting.
Walls are hand floated to fill slacks and voids.
Walls are scoured and fined using water and hand float systems.
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.
Forms
Assessment Cover Sheet
CPCCSP3001A - Apply float and render to straight and curved surfaces
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
CPCCSP3001A - Apply float and render to straight and curved surfaces
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent