CPCPGS3033A - Install and Commission Type A gas appliances
Assessor Resource
CPCPGS3033A Install and Commission Type A gas appliances
Assessment tool
Version 1.0 Issue Date: May 2024
Site location for work application may be either domestic or commercial, and may be a new work site or an existing structure being renovated, extended, restored or maintained.
This unit of competency specifies the outcomes required to install and commission Type A gas appliances approved for use with natural gas (NG) or liquefied petroleum gas (LPG) up to 200kPa.
Type A gas appliances are badged appliances of less than 500 megajoules (MJ) for which an approval scheme exists. They include but are not limited to space heaters, ducted heating systems, heated water storage, instant heated water heaters, decorative heaters, and gas stoves and hot plates.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
CPCPCM2023A
Carry out OHS requirements
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment providing that simulated or project-based assessment techniques fully replicate plumbing and services workplace conditions, materials, activities, responsibilities and procedures.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to provide evidence of:
locating, interpreting and applying relevant information, relevant Australian standards and specifications to determine the requirements for the installation and commissioning of Type A gas appliances
applying safety requirements throughout the work sequence, including electrical requirements and personal protective clothing and equipment
as a minimum and given the plans and specifications, the ability to install and commission a water heater, space heater, and cooking appliance; at least one of which is to be a domestic installation, one a commercial installation, and one a fan assisted flued appliance, ensuring:
application of sustainability principles and concepts
correct identification of location, design and details of proposed installations
correct selection and use of appropriate processes, tools and equipment
completing all work to specification
compliance with regulations, relevant Australian standards and organisational quality procedures and processes
communicating and working effectively and safely with others.
Context of and specific resources for assessment
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian standards' requirements.
Resource implications for assessment include:
an induction procedure and requirement
realistic tasks or simulated tasks covering the minimum task requirements
relevant specifications and work instructions
tools and equipment appropriate to applying safe work practices
support materials appropriate to activity
workplace instructions relating to safe working practices and addressing hazards and emergencies
material safety data sheets
research resources, including industry related systems information.
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.
Method of assessment
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
reinforce the integration of employability skills with workplace tasks and job roles
confirm that competency is verified and able to be transferred to other circumstances and environments.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.
Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills
Required skills for this unit are:
communication skills to:
access information
complete work notices and other relevant documentation
determine requirements
enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand
follow instructions
plan work with others
read and interpret:
documentation from a variety of sources
drawings and specifications
record test data in writing
use language and concepts appropriate to cultural differences
use and interpret non-verbal communication, such as hand signals
identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials
numeracy skills to apply measurements and calculations
organisational skills, including the ability to plan and set out work
teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities
technological skills to:
access and understand site-specific instructions in a variety of media
use mobile communication technology.
Required knowledge
Required knowledge for this unit is:
electrical safety and requisite precautions
how to access relevant information, including codes and technical standards
job safety analysis (JSA) and safe work method statements (SWMS)
material requirements determination process
procedures for installing and commissioning Type A gas appliances, including flashing and requirements for flues and ventilation
properties of gas, gas safety, combustion principles, pressure and flow rates
relevant statutory and authority requirements related to installing and commissioning Type A gas appliances
SI system of measurements
workplace and equipment safety requirements.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Safety (OHS) is to be in accordance with commonwealth, state and territory legislation and regulations and may include:
handling of materials
hazard control
identification and testing for electrical hazards
personal protective clothing and equipment prescribed under legislation, regulations and workplace policies and practices
safe operating procedures, including recognising and preventing hazards associated with:
electricity
hazardous materials and substances
service lines
surrounding structures and facilities
trip hazards
use of tools and equipment
work site visitors and the public
working at heights
working in proximity to others
use of firefighting equipment
use of first aid equipment
workplace environment and safety.
Environmental requirements may include:
clean-up protection
waste management.
Quality assurance requirements may include:
Australian standards
Environment Protection Authority (EPA)
environment policy
internal company quality assurance policy and risk management strategy
International Standards Organisation
site safety plan
workplace operations and procedures.
Tools and equipment may include:
chain blocks
drills
flaring tools
forklifts
hacksaws
hand trolleys
hoists and jacks
lifting and load shifting equipment
limited height scaffolding
measuring equipment
rollers
silver brazing equipment
spanners
test equipment and instruments
tin snips
wrenches.
Materials for installing and commissioning Type A gas appliances:
are to include Type A:
gas appliances
piping materials
flues
ventilation materials and components
are to comply with relevant Australian standards for installing and commissioning Type A gas appliances.
Sustainability principles and concepts:
Cover the current and future social, economic and environmental use of resources
may include:
appropriate component selection that has minimal environmental impact
choice of energy and water efficient appliances
efficient use and recycling of material
correct handling of hazardous materials
disposal of waste material to ensure minimal environmental impact.
Information may include:
charts and hand drawings
diagrams or sketches
instructions issued by authorised organisational or external personnel
job drawings
manufacturer specifications and instructions
material safety data sheets (MSDS)
memos
organisation work specifications and requirements
regulatory and legislative requirements, particularly those pertaining to:
building codes
OHS and environmental requirements
plumbing and gasfitting authority regulations
recognised formulas or tables accepted by the regulatory authority
relevant Australian standards
safe work procedures relating to installing and commissioning Type A gas appliances
signage
verbal, written and graphical instructions
work bulletins
work schedules, plans and specifications.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Building plans and specifications and any special instructions are obtained.
Safety (OHS) requirements associated with installing and commissioning Type A gas appliances, and workplace environmental requirements, are adhered to throughout the work.
Quality assurance requirements for company operations are identified and adhered to.
Appropriate work notices and required documentation are completed and dispatched in accordance with the authorities' requirements.
Tasks are planned in conjunction with others involved in or affected by the work.
Tools and equipment and materials, including personal protective equipment, are selected and checked for serviceability.
Work area is prepared to support efficient installation of Type A gas appliances.
Appropriate appliance for the gas supply type is selected in accordance with the job specification, ensuring the currency of the Australian Gas Association (AGA) or Australian Liquefied Petroleum Gas Association (ALPGA) approval number.
Existing piping is checked to ensure its compliance with relevant Australian standards and that its capacity is adequate for the additional load.
Appliance is located in conformance to regulatory requirements and relevant Australian standards, and is appropriate for appliance use and for piping, flue and ventilation requirements.
Appropriate pipe fittings and components for the installation are selected in accordance with relevant Australian standards.
Size of branch line is calculated in accordance with regulating authorities' requirements.
Ventilation openings and source of air supply are determined in conformance to relevant Australian standards and format required by the job specifications.
Quantity and type of materials and other components required are estimated from design drawing or on-site dimensions.
Requirements for natural gas or LPG appliance regulator installation are determined.
Piping system is installed in accordance with design drawing or instruction and relevant Australian standards.
Pipe system is tested in accordance with relevant Australian standards and regulatory authorities' requirements.
Appliance is installed in accordance with relevant Australian standards and manufacturer instructions and without damage or distortion to surrounding environment or other services.
Sustainability principles and concepts are applied throughout the installation.
Electrical safety check is conducted.
Consumer piping is purged and joints are reconnected in accordance with workplace requirements.
Appropriate testing instrument is selected and operated, with data being recorded in accordance with workplace requirements.
Pipe system is tested in accordance with relevant Australian standards and statutory and regulatory authority requirements.
Appliance is adjusted and reassembled and operation is checked in accordance with manufacturer specifications.
Operation of appliance is explained to customer.
Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures.
Information is accessed and documentation completed in accordance with workplace requirements.
Forms
Assessment Cover Sheet
CPCPGS3033A - Install and Commission Type A gas appliances
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
CPCPGS3033A - Install and Commission Type A gas appliances
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent