List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. | Prepare for work. | 1.1. | Applicable provisions of Australian standards, and legislative, manufacturer and enterprise requirements are identified and followed. |
1.2. | Work instructions are obtained, reviewed and confirmed. |
1.3. | Spa to be serviced or repaired is identified. |
| 1.4. | Service and/or repair requirements of spa are confirmed. |
| | 1.5. | Required tools, materials and equipment are selected and checked for correct operation and safety. |
| | 1.6. | Potential and existing risks and hazards in the work area are identified and controlled in line with work health and safety (WHS) and enterprise requirements. |
| | 1.7. | Sustainability principles and the appropriate selection and use of personal protective equipment (PPE) are applied to work preparation and application. |
2. | Service spas. | 2.1. | Service and maintenance requirements are identified from manufacturer specifications. |
2.2. | Replacement components are checked and fitted in line with manufacturer specifications. |
2.3. | Spa is serviced in line with manufacturer instructions. |
3. | Troubleshoot faults in spas. | 3.1. | Logical processes, including the application of basic principles, system knowledge and experience, are used in conjunction with technical manuals to ensure efficient and accurate troubleshooting of faults. |
| 3.2. | Defects are located and causes of defects are identified and recorded in maintenance documentation, including where required, any other systems disturbed. |
| | 3.3. | Specialist advice is obtained, where required and available, to assist with the troubleshooting process. |
| | 3.4. | Components are repaired or replaced in line with manufacturer instructions. |
| | 3.5. | Repair work is coordinated with relevant licensed personnel as required. |
| | 3.6. | Appropriate personnel are sourced to undertake repairs or replacement activities that are outside scope of own expertise, require specialist skills or equipment, or must be performed by licensed personnel. |
| | 3.7. | Fault finding and repair or replacement activities are carried out using sustainability practices and without unnecessary waste of materials or damage to equipment and the surrounding environment or services. |
| | 3.8. | Spa is commissioned in line with manufacturer specifications. |
4. | Complete repair and service activities. | 4.1. | Spa is reinstated to operational condition in line with work instructions. |
| 4.2. | Work area is restored to original condition and checked for safety hazards, waste is disposed of, and tools and equipment are cleaned and stored. |
| | 4.3. | Malfunctions, faults, wear or damage to spa, environs, tools and equipment are reported for repair or replacement. |
| | 4.4. | Notification of work completion is made in line with enterprise procedures. |
| | 4.5. | Information is provided to clients on compliance of spa and environs with safety legislation. |
| | 4.6. | Relevant documentation is completed and securely maintained. |
A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills and range of conditions of this unit.
The person must also demonstrate safe procedures when:
servicing one spa and its systems
repairing one spa, including troubleshooting routine and complex faults in spa systems.
In doing the above, the person must:
interpret work instructions
select and use personal protective equipment (PPE)
complete service and repair activities.
A person demonstrating competency in this unit must demonstrate knowledge of:
Australian Competition and Consumer Commission product safety guidelines
commonwealth, state or territory legislation, and local government regulations, Australian standards and codes of practice impacting on the service and repair of spas relating to:
dangerous goods
electrical and plumbing regulations controlling conduct of electrical and plumbing work
environmental protection
environmental health
private and public spas
waste disposal
work health and safety (WHS)
disinfection:
chemicals used
hazards
purpose
procedures
electrical safety principles
safe chemical-handling principles
spas:
basic operating principles
common faults
components:
air blowers
automated systems and spa controllers
booster jets
circulation
covers
disinfection system
emergency shut-off switches
filter pumps
heating system
hydrotherapy jets
hydrotherapy pump
motors
piping
timers
valves
construction material:
concrete
fibreglass
thermoplastic
stainless steel
design features:
dehumidification
design bathing loads
physical operation
water replacement
hot water circulation
maintenance
manufacture
plant space and location
risks and hazards
safe use
suction entrapment
types, operation and servicing of spas:
domestic
public
hydrotherapy pools
hot tubs
swim spas
indoor and outdoor
spa water hazards:
microbiological
non-microbiological
water testing:
equipment
parameters
techniques
test results.
The following must be present and available to learners during assessment activities:
equipment:
PPE
materials:
spa
spa components and fittings
technical manuals for spas
physical conditions:
assessment activities are performed in the context of performing service and repair activities on a domestic, commercial or public spa.
Assessment activities are performed on an individual basis under general supervision.
Assessor requirements
As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment.