List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Determine audio network requirements | 1.1 Establish system requirements in consultation with relevant personnel and with reference to production documentation 1.2 Investigate available system resources and determine capabilities 1.3 Draw accurate system flow charts with all components in correct order 1.4 Allocate audio stage boxes where analogue audio is required 1.5 Determine audio schedules and allow for pre-set system configurations and dynamic system changes 1.6 Discuss and finalise plans for audio system control networks that meet production requirements and timelines |
2. Test and commission network | 2.1 Assemble hardware components and network topography according to system needs and safety procedures 2.2 Complete interface with analogue audio as required 2.3 Test network topography and resources to ensure correct functioning 2.4 Commission analogue audio components appropriately 2.5 Activate and implement all DSP system pre-sets |
3. Monitor network | 3.1 Crosscheck performance of amplifiers and loudspeakers according to DSP system assignments 3.2 Apply knowledge of data interfacing and protocols to work activities 3.3 Identify problems with network, then take appropriate action or report to relevant colleagues as required 3.4 In consultation with relevant personnel, evaluate effectiveness of audio network operations and note areas for future improvement |
Evidence of the ability to:
configure and manage audio networks to meet production requirements on at least two occasions
work collaboratively.
Note: If a specific volume or frequency is not stated, then evidence must be provided for each of the above points at least once.
To complete the unit requirements the individual must:
explain the function of musical instrument digital interface (MIDI), SMPTE and show-based protocols and control mediums
describe the main features of systems used to control audio
explain terminology and definitions for digital systems and network control
explain how cues relate to control networks
explain the difference between analogue and digital forms of control and switching
explain the following concepts and procedures associated with data interfacing:
basic network protocols
communications
error correction
interfacing with common computer operating systems
network distribution
network topologies
transmission
explain how digital signal processing applies in control systems
describe proprietary audio transmission protocols and other kinds of full bandwidth audio transmission topologies.
Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to:
audio networking devices
a venue in which audio can be networked.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.